grit removal system Articles
-
Duraplus replaces steel pipe at the Sacramento Regional Wastewater Treatment Plant Case Study
In early 2002, it became clear that maintenance on the grit removal system at the Sacramento Regional Wastewater Treatment Plant (SRWTP) was required. Moving 100+ million gallons per day (MGD) of grit was quickly wearing out the original steel pipes, and replacement was needed. After testing several piping systems, the SRWTP decided to replace a section of steel pipe with DuraplusTM Industrial ...
-
PISTA 360 with V-FORCE Baffle - Municipal Headworks - Case Study
In the Sonora capital city of Hermosillo (Mexico) commenced plans for construction of a large new wastewater treatment plant that would handle and treat 90 percent of the flow generated by the area’s 1,000,000 residents. Project plans specified a conventional velocity channel grit removal system to protect the plant’s multiple extended aeration treatment basins. Project plans ...
-
PISTA 360 with V-FORCE Baffle - Small CSO Headworks - Case Study
The Shamokin Coal Township (Penn.) Joint Sewer Authority’s 2015 treatment plant upgrade and expansion, centered on two primary goals: long term control to mitigate overflows emanating from combined sewers and enhanced biological treatment capability. In order to deal with the surge events and protect the new downstream process equipment, the design team focused on augmenting plant ...
-
Development of wet pre-treatment and pulper technology
Since 1984 BTA is involved in activities in the area of waste pre-treatment. This process was first implemented in 1986 in a pilot plant. The patented BTA-Process is consisting of the following main steps: - Wet pre-treatment of waste with separation of the contaminants and production of a pumpable suspension- Sand separation by a hydrodynamic grit removal system- Digestion of the suspension in ...
By ORBIT e.V.
-
Indianapolis, Indiana Installations - Case Study
Maintain solids in suspension to prevent build-up in grit removal system for a dry weather flow of 70 MGD. SPECIAL REQUIREMENTS: The pulsed air mixing system is provided in JS101 B to suspend solids which settle out following grit removal so they can pass on downstream for further removal or treatment. Keeping solidsfrom accumulating in JS101B will minimize or eliminate the need to periodically ...
-
Oradea WWTP Project - Romania - Case Study
Customer: PWT (Germany) Project Name: Oradea WWTP Manufacturing year: 2006 Scope of supply 2 pcs. 6,7 m. Longitudinal Grit- Grease Scraper Unit with airlift mechanism for grit removal, by rail system, dry parts St- 37 and wet parts is AISI 304 1 pcs. Ø 30 m. Primary Sedimentation scraper with half rotating bridge, sludge scraper mechanism, material of dry parts is St- 37 and ...
By ASTIM A.S.
-
PISTA 360 with V-FORCE Baffle - Municipal Headworks - Case Study
For many years, the unified City-Parish Department of Public Works in Baton Rouge, La., has undertaken monumental capital improvements to expand its wastewater collection and treatment infrastructure. Following decommission of one WWTP and diversion of flows to an expanded and upgraded South Plant (SWWTP), the City-Parish estimated that more than $36 million per year will be saved in future ...
-
What is Wastewater?
What is wastewater? Wastewater, the waste discharge that first comes to mind in any discussion of stream pollution, is the discharge of domestic wastewater, which contains a large amount of organic waste. Industry also contribute substantial amounts of organic waste, some of which comes from vegetable and fruit packing; dairy processing; meat packing; tanning; processing of poultry, oil, paper ...
-
Case study - oil removal prior to evaporation
Customer: Locomotive Service Company located in Texas - repair and maintenance of railroad locomotives and cars. The Problem: Customer installed a water evaporator system to reduce waste water volume and disposal costs. Evaporator system included a small oil/water settling tank, but no oil skimming system. Customer needed an automatic oil skimming system to continually remove the ...
-
Case study – oil removal from central collection basin
Customer Profile: Largest manufacturer of newspaper stock and toilet tissue in Toronto, Canada using recycled paper as the primary ingredient in their production process. Customer collects paper, newsprint and magazines from “blue boxes” and other sources throughout Ontario Province. Customer separates the paper collected and makes recycled paper products. The Problem: ...
-
Case study - oil removal from oil water separator
Customer: Food Processor; forming and precooking prepared food items for the fast food industry. Plant located in Upstate New York. The Problem: Customer operates three shifts of production. The third shift is responsible for washing and sanitizing all food process equipment and surrounding areas. Oil and grease from sausage and hamburger cookers, and drippings on the plant floor from ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you