ground conductivity meter Articles

  • Estimating soil conductivity for GPR surveys

    The results of a ground penetrating radar survey depends on many factors. In order to get useful data and good penetration, one of the conditions is that the conductivity of the ground is not too high. The conductivity of the material together with the operating frequency and the dielectric constant allow us to calculate the loss factor that is used to roughly estimate the theoretical ...


    By Geoscanners AB

  • Park City, Utah Arsenic removal from ground water

    Background Park City Utah Water, which serves a population of 6,500, has five water sources. Spiro Tunnel and Spiro Portal are two that were in need of Iron and Manganese removal as well as above limits for Arsenic. Filtronics was engaged by the engineering firm of Eckhoff, Watson and Preator (EWP), Salt Lake City, to perform pilot tests for the Park City Municipal Corporation. The ...


    By Filtronics, Incorporated

  • The key advantages of FlashRES resistivity meter

    FlashRES-UNIVERSAL is the first instrument in the world that can fully utilise all its electrodes during data collection.  It is a significant technological breakthrough. FlashRES-UNIVERSAL has following key advantages: FlashRES is a 61-channal resistivity/IP system and it is extremely fast For each current injection, conventional resistivity systems usually collect ...

  • Expert assessment: Sea-level rise could exceed one meter in this century

    Sea-level rise in this century is likely to be 70-120 centimeters by 2100 if greenhouse-gas emissions are not mitigated, a broad assessment of the most active scientific publishers on that topic has revealed. The 90 experts participating in the survey anticipate a median sea-level rise of 200-300 centimeters by the year 2300 for a scenario with unmitigated emissions. In contrast, for a scenario ...

  • Mapping sedimentation features in an alluvial valley

    Sediments of the Rhone river are characterized by strong heterogeneity between clay, sand and gravel units. To map these units, we employed an electromagnetic instrument (DualEM421). This instrument das the advantage that no contact to the ground is required and it can be carried on foot. With the interpreted data it was possible to map different geologic units to a depth of up to 4.5m. ...


    By Geo2X

  • Using GPR to map rebar and post tension cables case study

    Building Renovation - Boston, MA Our client was tasked to install new plumbing lines as part of a building renovation. This task involved drilling cores through each floor of the building. Geoview was contracted to locate the rebar and post tension cables to determine safe coring locations. The geophysical investigation was conducted using Mala and GSSI Structure Scan ground ...


    By GeoView, Inc.

  • Application of radiomagnetiotelluric method case study

    Investigations of the landfill of industrial wastes by the RMT method The test site is the landfill of the coal ashes from power plants. The landfill was closed about 5 years ago. Material of the landfill is represented by powder-like particles and granules with the cross sizes from several millimeters up to the first centimeters. Wastes fill in a V-shaped valley of a stream (Fig. 1). The ...

  • Spatial and temporal sampling of ecosystem optical properties with the UniSpec-DC

    Satellite sensors (e.g. MODIS) provide large spatial patterns with regional or global coverage (Chen, 1999). However, the coarse resolution of satellite sensors are sometimes problematic, particularly for patchy landscapes (Turner et al., 2003). To properly validate and interpret satellite imagery, additional ground remotely sensed and biophysical data are needed. The UniSpec-DC (PP Systems, ...


    By PP Systems

  • Modeling geothermal wells using SVHeat and SVFlux

    Numerical modeling of geothermal processes has received increased attention in recent years. The process of installing geothermal heating systems in residential homes and cottages is one application of numerical models. These systems typically involve drilling between one and three wells on a particular property. Heat exchangers then act as a pump and remove heat from the ground in order to heat ...


    By SoilVision Systems Ltd.

  • Case study - Millbrook / General Motors

    Millbrook Proving Ground is one of the largest vehicle testing centres for the global automotive industry in Europe, constructed by General Motors. Today, they have a world-wide client base and test tracks for a whole range of vehicles. They chose Carbon Credentials, a leading supplier of Carbon & Energy Management software and related services, to conduct air conditioning inspections for ...


    By Carbon Credentials

  • Identification of Archeological Remnants

    Czorsztyn Castle, Poland 2D Electrical Imaging Objective Study area was within the ruins of the 14th century Czorsztyn Castle, located in the boundaries of Pieniny National Park (southern Poland). The main goal of this research was to check if one of the stone wall residues continues under the ground surface. Additionally, an attempt was ...


    By Advanced Geosciences, Inc.

  • Redhill Primary School - case study

    Reducing energy costs and shrinking carbon footprint without compromising on comfort When it came to choosing the right heating and cooling solution for Redhill Primary School, Worcestershire County Council wanted a sustainable alternative to the less environmentally friendly methods of oil or gas. ENER-G Sustainable Technologies (EST) delivered a full turnkey solution from thermal conductivity ...


    By ENER-G

  • Case study - The Philadelphia Water Department (PWD)

    Service: Sahara Leak Detection Client: The Philadelphia Water Department (PWD) Project Date: 2007 Type of Pipelines: Transmission Mains Diameter: 16 to 60-inch Pipe Material: Cast Iron Dutile Iron Steel Length: 22.2 miles Results: 47+ leaks identified The Philadelphia Water Department (PWD) has focused on water loss management programs for the past decade ...


    By Pure Technologies

  • Down-hole tomography

    This is a collection of various cases where the 2D resistivity imaging method pioneered by Advanced Geosciences Inc have been successfully applied. Click on a section below and you will be shown a full 2D resistivity imaging brochure detailing the ...


    By Advanced Geosciences, Inc.

  • Geothermal Heat Pump (GHP) - Case Studies

    Case Study: “GHP schools used approximately 26% less source energy per square foot of floor area,” according to an evaluation of Lincoln, Nebraska schools by the Department of Energy. The report concludes that the schools using GHP technology “outperform others in the school district.” Case Study: Annual electrical consumption in Fort Polk ...

  • Dispersion modeling— New downwash calculations change the playing field

    For many people, the terms “stack height” and “dispersion model” do not ring a bell. Others grapple with these terms as they can be challenging factors in the process of obtaining an air construction permit. Have you ever constructed a stack at a specific height due to EPA guidelines and regulations surrounding Good Engineering Practice (GEP) as it relates to air ...


    By Trinity Consultants

  • Study of Natural Bioremediation Projects Using Time-Release Oxygen Compounds.

    ABSTRACT: Enhanced natural bioremediation studies are being conducted on a series of sites throughout the midwest United States. Each site exhibits a unique geologic condition, contaminant concentration, enhancement application, and remediation goal. Based on a review of 14 sites, the usage and effectiveness of enhanced bioremediation has been categorized to provide general guidelines for ...


    By REGENESIS

  • Pump/Recharge Rate Affects Saltwater Intrusion

    Untitled Document Many areas of the world use groundwater as their main source of fresh water supply. With the worlds population increasing ...


    By Solinst Canada Ltd.

  • Former Dry Cleaning Site Contaminated with PCE - Case Study

    In-Situ® Inc. TROLL® 9500 Multiparameter Sonde helps resolve treatment challenges and saves $200,000 in drilling, reagents, and consulting. A former dry-cleaning site in the Pacific Northwest, Ultra Custom Care Cleaners, was found to be contaminated with PCE (perchloroethylene). According to the U.S. Geological Survey (USGS), PCE was widely used in the dry cleaning of fabrics since the ...


    By In-Situ, Inc.

  • Case study - Halifax Water

    A section of the 30" diameter LCP Halifax-Bedford connector pipeline was identified by the client as being high-risk as it operated at a relatively high pressure (over 170psi), supplied a rapidly growing community and ran past residential areas along side of a highway. It would have been difficult to remove the line from service so Halifax Water selected PipeDiver to carry out a condition ...


    By Pure Technologies

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you