h2s micro-sensor Articles

  • H2S Safety in Sour Gas Operations

    How GasFinder works Boreal Laser’s GasFinder & GasFinder MC are open-path gas detectors that use an integrated transmitter/receiver unit and a remote, passive retro-reflector. In GasFinder (see below) the transceiver als o houses the laser diode, drive electronics, detector module and micro-computer subsystems. The transceiver unit is contained in an IP65 enclosure and has connectors for ...


    By Boreal Laser Inc.

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • Choosing the Right H2S Analyzer for Your Specific Application

    Not all H2S analyzers are created equal, and certain H2S analyzers work better on different applications than they do others. Significant amounts of time, money and headaches can be saved by learning about the different H2S analyzer principles of operation and choosing the correct analyzer for your ...


    By Analytical Systems Keco

  • Case study N°AA1 – Ambiant air monitoring – WWP TRS MEDOR H2S filter

    Context & Challenges Globally, the wastewater treatment is the first public health issue. Urban development leads to urbanization near waste water treatment plant and extension of sewerage network. These aspects induce to an augmentation of sulfur compounds (H2S, mercaptans and sulfides) which are very corrosive, odorant and toxic. To monitor this compounds online CHROMATOTEC® ...


    By Chromatotec Group

  • A polyvinylchloride-based cadmium ion-selective electrode using [Mo2(OAc)2(H2-calix[4]arene)] as an electroactive material

    A highly electroactive material Mo2[(OAc)2(H2-calix[4]arene)] is used as a neutral carrier for Cd2 +  ions in this paper. The membrane is fabricated by using ionophore [Mo2(OAc)2(H2-calix[4]arene)]:poly(vinyl chloride) (PVC): dibutylphthalate(DBP):sodium tetraphenyl borate (NaTPB) in the ratio of 40:300:470:5 respectively and tetrahydrofuran (THF) used as a solvent. The membrane electrode ...


    By IWA Publishing

  • Subminiature Photoionization VOC Sensor

    Untitled Document 1. Objective Monitoring of Volatile Organic Compounds (VOCs) is required for a number of gas analysis applications, such as: ...


    By MOCON, Inc. - Baseline

  • An experimental investigation of a solar/wind 4 kW micro generation system and T-1000 1.2 kW PEM fuel cell

    Hybrid system inclusive of renewable energy may be a key component for the solution of global warming, poor air quality, economic dependence, reducing-dwindling reserves of fossil fuels and also carbon tax in Australia. Firstly, this paper describes the experimental setup of wind/solar 4 kW micro generation system, examines the energy produced and various readings of monthly, weekly, daily and ...


    By Inderscience Publishers

  • Case Study: Liz Bagshaw on the IRC sensors

    Our infrared IR’C sensors have been making waves in the world of glacial meltwater monitoring. Glacial environments are key indicators of global warming and climate change. They’re also home to a diverse range of microorganisms. Both of these need to be quantified and monitored, but doing this isn’t easy because of the cold, remote environments in which they are found. To combat ...


    By Partech (Electronics) Ltd.

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • Biodegradation of hydrogen sulphide by inoculated Rhodococcus sp.zw11 in a pilot-scale biotrickling filter

    A strain of autotrophic micro-organism, Rhodococcus sp.zw11, was isolated from pharmaceutical wastewater containing hydrogen sulphide (H2S). The shape, physiological and biochemical characteristics and oxidation capacity of Rhodococcus sp.zw11 were studied, and the effect of inlet concentration and volumetric loading of H2S on the removal efficiency was evaluated by the biotrickling filter ...


    By Inderscience Publishers

  • Danger and Detection of Hydrogen Sulphide Gas in Oil and Gas Exploration and Production

    A rig worker smells rotten eggs near the well head, rubs his itchy eyes as he investigates the frosty pipe connections. After a few moments, he believes all is fine as he no longer smells the tell-tale hydrogen sulphide odour. In this scenario, we can only hope the worker recognises the danger and quickly leaves the site. Oil fields, especially mature ones, can produce hydrogen sulphide gas ...

  • Case study - Bi-On Carb OX: Odor treatment in WWTPs. Case study SIMTEJO (Portugal)

    Avoiding problems associated with foul odors in and around collectors and waste water treatment plants is today one of the major focus points to avoid possible issues related to worker safety, as well as minimizing negative social discomforts caused by the foul odors. The main sources that generate foul odors in WWTPs occur at stages of anaerobiosis, where the lack of oxygen favours the ...


    By Bioconservacion SA

  • Water pollution · Canarina DESCAR software

    Natural waters contain micro-organism as well as solutes. There is a distinction between ‘pure’ water, meaning water that is fit to drink and pure water that is a single substance. A water pollutant is a substance that prevents the use of water for a specified purpose. The signs of polluted water are obvious. Poor drinking water tastes and smell bad. ...

  • Easy payback from biogas monitoring

    There is a strong business case for biogas monitoring and CHP protection. A fixed biogas analyser may cost some £6-10,000 and monitor gas every few minutes day and night. By comparison it can save its own cost many times over by protecting CHP engines from expensive unplanned downtime, biogas engine ...


    By Geotech

  • LDO offers 80 % less maintenance within paper industry

    For many years there has been a strong trend towards resource conserving production in order to cut water consumption in the paper industry. Nevertheless, in 2004 an average of 9.6 litres of wastewater was generated per kilogram of paper in Germany. Several paper mills, which together account for more than 75 % of the gross production volume, use biological processes to treat their wastewater. In ...


  • Continuous biogas monitoring with AEMS in South Korea

    Application Biogas research projects Equipment AEMS biogas analyser Location South Korea Customer KEPCO Research Institute Requirement The customer ...


    By Geotech

  • Biogas in Asia

    The development of biogas production and monitoring has had many twists and turns, from its early days in Germany to the heady days of support through the Clean Development Mechanism (CDM).   The fall in the price of carbon credits, which rewarded reduction in emissions of methane (CH4) - a potent greenhouse gas - and use of methane from waste as renewable energy, has hit Asia ...


    By Geotech

  • Chlorine Dioxide gas detection: A comprehensive guide

    Introduction Some years agoago, the bleaching process in the paper industry was changed from using Chlorine (Cl2) as bleaching agent to Chlorine dioxide (ClO2). This was a challenge forThis posed a major challenge to industrial hygienists, as there were no sensors or detectors available that were specific to Chlorine dioxide: There was no sensor technology for gas detectors available that ...

  • Growth and gas-sensing studies of metal oxide semiconductor nanostructures

    One-dimensional (1D) nanostructures of semiconductor oxides are of interest for various applications including gas sensors. For gas sensors, nanostructures have advantages of improved gas-sensing characteristics and have potential in fabrication of miniature sensor. In this paper, we review some of the work done in our laboratory towards growth of nanostructures of SnO2, ZnO and CuO and ...


    By Inderscience Publishers

  • Study of defect behaviour in Ga2O3 nanowires and nano-ribbons under reducing gas annealing conditions: applications to sensing

    The growth of monoclinic Ga2O3 nanowires, nano-ribbons and nano-sheets has been investigated. Results indicate that high quality single crystal nanowires can be grown at 900?C using an Au catalyst, while single crystal nano-ribbons and nano-sheets require no metal catalyst for growth. Since bulk Ga2O3 is a promising material for high temperature gas sensing, Ga2O3 nanowires and nano-ribbons may ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you