hap emissions Articles

  • Utility MACT and HAPs

    C 6.1  | The Utility MACT Rule: An Industry Perspective Michael  Rossler |  Manager, Environmental Programs, EEI EPA is proceeding with the Utility MACT rulemaking for coal- and oil-based EGUs. The ...

  • Estimation of HAP Emissions from Oil and Gas E&P Operation Wastes

    Wastes generated from oil and gas Exploration and Production (E&P) operations contain chemicals that are considered as toxic air pollutants for the purpose of toxic release inventories (TRI) reports or hazardous air pollutants (HAP) under Title III of the 1990 Clean Air Act Amendments. A study was conducted to estimate HAP emissions from E&P waste management operations on a per-event basis. The ...


    By Trinity Consultants

  • Case study - RTOs leave nothing to HAP-penstance

    PROBLEM The United States EPA promulgated a ruling in 40 CFR, imposing strict new standards to reduce emissions of toxic air pollutants from the manufacture of pharmaceutical products, including prescription and over-the-counter drugs. The agency's rule was intended to reduce emissions of a number of air toxins and hazardous air pollutants (HAPs), including methylene chloride, ...

  • `Estimation of HAP Emissions from Oil and Gas E & P Operation Wastes,` presented at AWMA 2000 Conference & Exhibition

    Abstract Wastes generated from oil and gas Exploration and Production (E&P) operations contain chemicals that are considered as toxic air pollutants for the purpose of toxic release inventories (TRI) reports or hazardous air pollutants (HAP) under Title III of the 1990 Clean Air Act Amendments.  A study was conducted to estimate HAP emissions from E&P waste management ...


    By Trinity Consultants

  • Case study - CRI advances customer service and reduces cost with VOC/HAPS reporting tool

    Color Resolutions International (CRI) is a leading producer of water-based flexographic inks used on paper and film packaging for graphic image and performance conscious printers. CRI’s central manufacturing plant is located in Cincinnati, Ohio and the company operates 19 blending sites in the U.S. to provide prompt local service. The Situation Certain ...


    By UL The WERCS

  • Biotoxicity study of bone cement based on a functionalised multi-walled carbon nanotube-reinforced PMMA/HAp nanocomposite

    The carbon nanotubes are emerging as innovative tools in nanobiotechnology. However, their toxic effects on the environment and health have become an issue of strong concern. In the present study, we demonstrate biotoxicity test of bone cement based on functionalised carbon nanotube reinforced PMMA/HA for next generation biomedical applications. The biotoxicity of f-MWCNTs was tested in ...


    By Inderscience Publishers

  • Reducing Odor and VOC Emissions

    The Montgomery County Regional Composting Facility (MCRCF) in Silver Spring, Maryland is designed to process 400 wet tons/day of lime amended biosolids from the Blue Plains Wastewater Treatment Plant (WWTP) in Washington, D.C. Recently, political pressures forced operations to cease at the MCRCF. Although the aerated static pile composting plant’s fate has not been completely decided, its owner, ...


    By BioCycle Magazine

  • Emission Testing and Monitoring

    Presented in Track B4: EMISSION TESTING & MONITORING at EUEC 2011, January 31 Phoenix, Arizona B4.1  | Update on PM2.5 and Condensable Particulate Matter Emissions Measurement Methods Larry Hottenstein |  Partner, Environmental Resources Management Following the promulgation of the PM2.5 ...

  • Biofiltration of Particleboard Press Vent Emissions

    INTRODUCTION Bio•Reaction Industries, LLC contacted SierraPine Ltd in January of 2001 to discuss the potential for installing a pilot biofilter system controlling hazardous air pollutants (HAPs) from the particleboard press at the Springfield, Oregon mill. This wood products company was familiar with biofilter controls for VOC and HAP emissions as a conventional, flatbed biofilter system had ...


  • Put energy into emission control projects

    Many companies feel pressured to spend the least amount possible to meet environmental regulations, primarily because compliance isn’t a profit generating endeavor. What some environmental and compliance managers fail to realize is that emission control equipment can quickly become a profit decreasing endeavor with this penny wise-pound foolish approach. With mandatory greenhouse gas (GHG) ...

  • Curbing Emissions From The Manufacture Of Wood Products

    Untitled Document Many types of industrial facilities must control airborne emissions of volatile organic compounds (VOCs) and ...


    By BASF Catalysts

  • Facing the New Emission Standards for Hydrochloric Acid Pickling

    The U.S. Environmental Protection Agency (EPA) has developed a new regulation to reduce hazardous air pollutant (HAP) emissions from facilities that pickle carbon steel using hydrochloric acid (HCl) solution as well as from associated HCl regeneration plants. This regulation, the National Emission Standards for Hazardous Air Pollutants for Steel Pickling – HCl Process Facilities and HCl Acid ...


    By Trinity Consultants

  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • Fugitive Emissions - Consent Decree Compliance Management; It is Possible!

    Untitled Document INTRODUCTION Fugitive emissions from process equipment such as valves, connectors, pumps, etc. can account for 30 to 60% of a petroleum ...


    By InspectionLogic Corporation

  • Case study - Kiln emission control technologies

    Overview A specialty ceramic material manufacturer in the United States operates several custom-built furnaces in their manufacturing process.  Sometimes referred to as kilns, these high-temperature process devices are generally a major source of air pollutants and require an abatement technology to meet environmental regulations with the state or federal agencies.  As is the ...

  • National Air Pollutant Emission Trends, 1900-1998

     Executive Summary What information is presented in this report? This report presents the United States (U.S.) Environmental Protection Agency’s (EPA) latest estimates of national emissions for criteria air pollutants: carbon monoxide (CO), nitrogen oxides (NOX ), volatile organic compounds (VOC), sulfur dioxide (SO2 ), particulate matter (PM) less than 10 ...

  • Sources of PCDDs/PCDFs In Cement Kiln Emissions

    Abstract This paper presents data on the source of PCDDs/PCDFs in cement plant stack emissions, demonstrating that these emissions are not necessarily all created by the process. The data potentially demonstrates that some of the PCDDs/PCDFs in the emissions are pre-existing dioxins and furans that are vaporized out of the kiln raw feed. This calls into question the assumption that PCDD/PCDF ...


  • `Facing the New Emission Standards for Hydrochloric Acid Pickling,` presented at the SUR

    Introduction Under the 1990 Clean Air Act Amendments (CAAA), U.S. EPA is required to regulate sources of hazardous air pollutants (HAPs). Primarily, HAP emissions are regulated through National Emission Standards for Hazardous Air Pollutants (NESHAPs), which are codified under Title 40 Code of Federal Regulations (CFR) Part 63. NESHAPs address HAP emissions from a particular process, ...


    By Trinity Consultants

  • The Whole Plant Approach to Air Emission Modeling for NESHAP Compliance

    ABSTRACTLong overlooked, the air emissions associated with biological treatment of process wastewaters continue to be further scrutinized and regulated. The common approach is to utilize EPA’s Water9 as a model to present findings and support permitting activities. It is essential when using a model that not only is the facility modeled appropriately, but also that the specific compound ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you