hazardous area combustion technology Articles

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • Reducing the risk of dust explosion hazards

    In the wake of recent tragic and highly publicized dust explosions, companies are asking, 'Could that happen here?' and 'What can I do to prevent such an incident at my facility?' One approach is to manage dust explosion hazards as though they were subject to OSHA’s Process Safety Management (PSM) requirements (29 CFR 1910.119), even though dust hazards often are not covered under this ...


    By ABS Consulting

  • U.S. EPA Promulgates Final Air Toxics Standards for Compression Ignition Reciprocating Internal Combustion Engines (RICE)

    On March 3, 2010, U.S. EPA promulgated final National Emissions Standards for Hazardous Air Pollutants (NESHAP) for existing compression ignition (CI) stationary Reciprocating Internal Combustion Engines (RICE) that were not previously regulated by the existing, so called, RICE MACT (i.e., 40 CFR Part 63, Subpart ZZZZ).  The RICE MACT rule was originally promulgated in 2004.  The March ...


    By All4 Inc.

  • Common Treatment Technologies for Nonhalogenated VOCs

    Soil vapor extraction (SVE), thermal desorption, and incineration are the presumptive remedies for Superfund sites with nonhalogenated VOC-contaminated soil. Because a presumptive remedy is a technology that EPA believes, based upon its past experience, generally will be the most appropriate remedy for a specified type of site, the presumptive remedy approach will accelerate site-specific ...

  • Developing Technologies to Detect Hydrogen Sulfide (H2S) Gas

    Abstract Hydrogen sulfi de (H2S) gas can cause nausea, headaches, unconsciousness, and death. Industries struggle to detect this deadly substance before it harms workers or communities. Safety system manufacturers have developed detectors that sense the H2S quickly and accurately. This paper illustrates, in general terms, considerations in effective placement of H2S detectors: ...

  • An EHS Checklist for Low-Risk Technology Facilities

    For environment, health and safety (EHS) managers at technology companies, identifying, assessing and prioritizing potential risks in a lower-risk environment - from offices to call centers - is part of the job. And when it comes to EHS programs, compliance is just the start. The following EHS checklist can serve as an assessment guide for EHS managers of low-risk ...


    By Antea Group - USA

  • Case study - Kiln emission control technologies

    Overview A specialty ceramic material manufacturer in the United States operates several custom-built furnaces in their manufacturing process.  Sometimes referred to as kilns, these high-temperature process devices are generally a major source of air pollutants and require an abatement technology to meet environmental regulations with the state or federal agencies.  As is the ...

  • Fixed multi-parameter gas detection system can ensure industrial facilities are safe from hazardous or toxic gases

    Industrial workplaces are likely to come across one or more hazardous or toxic gases. Combustible gases such as methane are highly dangerous because they can cause large and fatal explosions when ignited. Other problem areas when working in industry are carbon monoxide (which poisons the cardiovascular system), oxygen deficiency, and elevated levels of other gases and pollutants, depending and ...


    By PPM Technology

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Dispersed Phase Inertisation (DPI): A New Technology for the Treatment of Landfill Leachate and Complex Water

    Inertisation is thus far the only technology for the conversion of leachate and contaminated water into an inert product, thereby facilitating handling and disposal in MSW landfills. Introduction One of the most complex aspects of the global management of an MSW landfill or treatment plant is leachate. This liquid comes mainly from the degradation of organic matter, added to other ...


    By Energy & Waste S.l

  • Detecting Gases: What You Can`t Smell Can Hurt You

    Walking through a drill-site area, a worker smells rotten eggs and stops tor a minute or two to assess where a gas leak might exist. Rubbing his itchv eves as he investigates further, he notices that he no longer smells the tell¬tale hydrogen sulphide odour. He does not realize that the gas has deadened his olfactory senses and unless he leaves the area within seconds, he could lose ...

  • Fixed Versus Portable Gas Detection – Which Is Better?

    Did you know that workers are needlessly injured every year as a result of leaking toxic or combustible substances? Such incidents are known to involve a wide range of hazardous gases (including ammonia, carbon monoxide, chlorine, hydrogen sulfide, hydrocarbon vapors and so on). The sad reality is that most of these accidents are avoidable if only the workplace is adequately monitored. This leads ...

  • Small-scale electricity production from biomass

    NC Service has set up the first plant of this type in Spain Thanks to the BIOCOM Project, Nicolás Correa Service, S.A. has built the first biomass combustion plant that not only produces thermal energy, but also electricity on a small scale (130 gross kWe). The process is based on the combustion of woodchips in a furnace to produce heat that is then transferred to an ORC module, where it ...

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Case study - Pemaco superfund site remediation

    OVERVIEW Pemaco was formerly a chemical facility located in a light industrial and residential area of Maywood, CA, adjacent to the Los Angeles River. No one knows how long hazardous substances had been leaking into the ground but the operations date back to the 1940's.  Up until closure of the facility in 1991, chlorinated solvents, aromatic solvents, and flammable liquids had ...

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • EPA issues final rules for boilers

    The U.S. Environmental Protection Agency (EPA) reports that more than 200,000 boilers, process heaters and incinerators will be impacted by a set of Clean Air Act regulations issued on February 21, 2011. Since EPA first proposed the ...


    By Bergeson & Campbell, P.C.

  • Case study - Amine tail gas treatment

    COVERING YOUR TAIL GAS The discovery of new shale formations throughout the world and the development of new drilling technologies have increased natural gas production and prompted government agencies to instigate tighter air-pollutioncontrol regulations on processing operations. Unfortunately, meeting environmental regulations is not a profit-generating endeavor. Simply put, the time ...

  • Ensuring personnel safety in a confined space

    “There are no second chances with a confined space entry. It has to be right first time.“ Identifying a confined space… The HSE Confined Space Regulations 1997 define a confined space as: “A space of an enclosed nature where there is a risk of death or serious injury from hazardous substances or dangerous conditions” Some confined ...


    By a1-cbiss

  • If the fire doesn’t kill you, the CO2 might – carbon dioxide and fire suppression

    Carbon dioxide (CO2) has been used in fire extinguishers and fire suppression systems for more than a hundred years. In high concentrations it dilutes oxygen, thus removing one of the three elements of the combustion triangle (the other two being heat and fuel). It is also cheap, widely available, odourless, colourless, electrically non-conductive, chemically inert and it leaves no residue. It is ...


    By Analox Sensor Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you