hazardous area gas Articles

  • Classifying Hazardous Areas

    The IEC is composed of approximately 40 countries including the United States. The purpose of the IEC is to establish standards for a wide variety of electrical products with the intent of encouraging international trade. The IEC has assigned a technical committee, TC 31, to develop recommendations covering equipment, testing procedures and classification standards for areas where the potential ...

  • Nitrogen Demand Increases for Semiconductor: How Safe Are You?

    As users demand ever-smaller smartphones and better televisions, semiconductor manufacturing plants are tasked with developing new products faster and using new materials. Key to the continued success of the semiconductor industry are inert gases, which include nitrogen and argon. When used safely, both nitrogen and argon play a number of important roles within the semiconductor ...

  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

  • Flammable Hazards

    Flammable Hazards The difference between a gas and a vapor is that vapors arise from liquids, whereas gases are normally in a gaseous state. Flammable vapors present additional sampling concerns (for example, we must prevent vapors from returning to the liquid state during sampling). The 3 Elements of Fire Three elements must be present for a flammable ...

  • Area Monitoring: Diffusion Sampling

    Indoor and outdoor gas hazards that exist in open areas are usually monitored using diffusion-type sensors. A diffusion sensor has no active sample-drawing system; diffusion sensors rely on the ambient air movement and pressure to deliver the sample to the sensing element. Diffusion-type sensors are a reliable and cost-effective way to monitor open area gas hazards. When installing diffusion ...

  • Indoor Air Quality and Hazardous Gas Detection

    Indoor air contaminants come in a variety of forms and originate from multiple sources. Interactions between building materials and furnishings, activities and equipment inside the building, internal temperature and relative humidity, filtration and ventilation system operations, climate and building occupants all contribute to the indoor air quality (IAQ) in commercial, industrial, residential ...

  • Design and optimisation for fixed area cellular layout problems using GA and SAA

    This paper compares two familiar optimisation algorithms named Genetic Algorithm (GA) and Simulated Annealing Algorithm (SAA) to find out the best algorithm which is suitable for solving the cellular layout design problems. The objective is to minimise the movement of parts within the cell by appropriate placement of machines. In determining the physical location of work centres, some relative ...


    By Inderscience Publishers

  • INTRINSICALLY SAFE WIRELESS MONITORING AND CONTROL NODES ARE CERTIFIED WORLDWIDE FOR USE IN HAZARDOUS AREAS

    INTRINSICALLY SAFE WIRELESS MONITORING AND CONTROL NODES ARE CERTIFIED WORLDWIDE FOR USE IN HAZARDOUS AREAS DX99 FlexPower nodes from Banner Engineering are available in metal housing for gas and dust atmospheres A series of intrinsically safe wireless communication nodes certified for worldwide use in explosive gas or dust atmospheres is available from Banner Engineering. The nodes interface ...


    By Banner Engineering Corp.

  • A Two Channel Gas Detector for Monitoring Hazardous Gases in the Workplace

    The potential for exposure to hazardous gases is a concern in many workplace environments. To ensure the safety of the workers, equipment, and the facility, areas presenting a gas hazard should be monitored by gas detectors. Commercial buildings that share a warehouse with manufacturing and/or service work in the back and offices in the front are a prime place for harmful gases and vapours ...

  • GIS in Petro Gas Pipeline Integrity and Hazard Consequence Analaysis

    GIS APPLICATION FOR PETRO & GAS PIPELINES SYSTEMS The major challenges facing the Petro and Gas pipeline supply and distribution Industry are: Isolated and distant location of operating and service areas from the well drilling locations and source points  Distributed customers with varying patterns of consumption. Variety in plant and equipment with periodic operational and ...


  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • Paint booths, or areas using combustible gases: why a requirement for combustible gas monitor might be necessary

    Paint booths save time and ensure a smooth and professional application of paint in a range of industries, including automotive, aerospace, home decor, furniture, and more. Combustible gases and fluids in the paint booth environment can pose a health hazard if something goes wrong. Explore the hidden dangers of paint booth fluids and gases, and learn how a ...

  • Hazardous chemicals and proper storage solutions

    Many acceptable categorical storage schemes have been proposed and used by laboratories in academic, industrial, government and medical institutions. The common features uniting all these plans is the separation of incompatible materials. The differences in these various storage schemes arises in the number of groups that should be established for segregation purposes. The ten most commonly cited ...


    By US Chemical Storage

  • Fixed multi-parameter gas detection system can ensure industrial facilities are safe from hazardous or toxic gases

    Industrial workplaces are likely to come across one or more hazardous or toxic gases. Combustible gases such as methane are highly dangerous because they can cause large and fatal explosions when ignited. Other problem areas when working in industry are carbon monoxide (which poisons the cardiovascular system), oxygen deficiency, and elevated levels of other gases and pollutants, depending and ...


    By PPM Technology

  • Transfer and translocation of organochlorine pesticide residues in an agricultural area of Romania

    The study refers to translocation of some organochlorine persistent pesticides (Lindane, Aldrin, Endosulphane and DDT) in/from soil to surface and underground water and their accumulation in some crops in an agricultural area nearby Bucharest. The samples analysed were soil, surface water (Arges River) and underground water (wells). Pesticide residues were found especially in soil samples, in ...


    By Inderscience Publishers

  • Compressed Gas Safety Guide

    Use and storage of any compressed gas under high pressure can be extremely dangerous if proper gas handling procedures are not observed. Moreover, chemical characteristics of specialty gases themselves can pose serious health hazards if containment is not tightly controlled. Paying close attention to a compressed gas product’s technical and safety information is invaluable for maintaining a safe, ...

  • Gas safety in confined spaces

    A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and ...

  • Gas Safety in Confined Spaces

    Introduction A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and brewing, as ...

  • Gas Safety in Confined Spaces

    Introduction An offshore worker ensures a vessel is safe to enter; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face common dangers, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited. A confined space ...

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you