hazardous area light Articles

  • Safety and Reliability in High Mast, Light Tower and Area Lighting

    When illuminating a work area, sporting complex, roadway, or any populated area, safety and reliability are of the utmost importance. Without proper illumination, risk for accidents and injury is increased. Power outages, mechanical or equipment failure, or acts of nature can introduce unwanted hazards into the environment. Advances in LED technology have solutions that address these safety ...


    By Larson Electronics LLC

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • Hazardous waste sites and property values: a French case study in the light of US analyses

    This paper aims to evaluate the impact of a polluted site on property values by using the hedonic price method. The case study concerns a lead foundry in a previously industrialised area in northern France. The results are fairly convincing. The impact is confirmed, but appears to be especially apparent at relatively close distances. More than one mile away, the impact is much weaker. Moreover, a ...


    By Inderscience Publishers

  • Nanotechnology – what is it? are there hazards?

    This is the first of a series articles on the emerging field of Nanotechnology. What is it? In short – small! Very small! Very, very small! Nanotechnology comes from the prefix Nano which, in English, means 1/billionth, just as micro means 1/millionth. So Nanotechnology involves 2 things: 1) extremely small man-made materials – some even as small as 1 atom thick, ...


    By Atlantic Environmental, Inc.

  • Lighting the way for disinfection - Case study

    Pharmaceuticals manufacturing involves the handling of powders and volatile, flammable solvents such as iso-propanol. Consequently there is every opportunity for explosive atmospheres to form. Where this is the case, the Dangerous Substances and Explosive Atmospheres Regulations 2002 (DSEAR) require that new equipment and protective systems must be selected on the basis of the requirements set ...


    By atg UV Technology

  • From “Light Green” to Sustainable Buildings

    As more people move to urban areas in search of economic opportunities, the number of buildings that are needed to house them continues to rise. It is estimated that by 2030, an additional 1.4 billion people will live in cities, of which 1.3 billion will dwell in cities of developing countries. The increasing number of buildings has long-term impacts on both the environment and natural resources. ...


    By Worldwatch Institute

  • Asbestos Awareness: Preventing a Hazardous Workplace

    Many on-the-job hazards are obvious... leaking machinery... dangerous chemicals... slippery floors. However, other hazards aren't so obvious. There may be no visible signals that they are present at all. That's why Asbestos is often known as 'the silent killer.' While you often can't see, taste or smell it..., prolonged periods of exposure to Asbestos can cause lung disease, cancer... even death. ...


  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

  • What is the best way to light up a building with colors?

    Need to light up a building with vibrant, energetic colors? Technological advancements in large image projection, industrial lighting and colored filters can be used to support elaborate lighting displays on buildings. Read on to learn about three effective methods for lighting up a building with colors. Best Method: Commercial Projector For a ...


    By Larson Electronics LLC

  • Commercial Pit Lighting recommendations, layouts and best practices

    Commercial Pit Lighting Recommendations, Layouts and Best Practices According to an article archived by Commercial Motor (published on May 25, 1973), inspection pits typically found in commercial repair garages are filled with dangerous hazards that could cause fatal accidents. The publication was one of the first organizations to acknowledge explosive hazards ...


    By Larson Electronics LLC

  • Advantages of Corrosion Resistant Lighting in Offshore Helidecks

    Advantages of Corrosion Resistant Lighting in Offshore Helidecks Corrosion resistant lighting must be installed in offshore helidecks due to the extreme nature of the hazardous location. The use of such luminaries can extend the lifespan of the location’s lighting system and provide safety for aircraft pilots and workers on the site. ...


    By Larson Electronics LLC

  • Hazardous Material and Asbestos Inspection Case Study

    Global has been contracted by the Genesee County Land Bank Authority (GCLBA) to complete pre-demolition hazardous material and asbestos inspections on blighted structures located in the City of Flint beginning in 2002 and continuing through the present. In March and November 2013, Global was awarded multiple contracts from GCLBA, which utilize MBEG and HHF funding sources to eliminate blight and ...

  • Explosion Proof UV Lights for Commercial and Industrial HVAC systems

    In the past decade, more and more people have been installing UV lights in their HVAC systems to eradicate harmful bacteria. A timely study from Duke University Medical Center has proven the effectiveness of using UVC bands to disinfect a myriad of dangerous microbes, including drug-resistant bacteria, such as Acinetobacter, Clostridium difficile and vancomycin-resistant enterococci (VRE). During ...


    By Larson Electronics LLC

  • Mishandling of Hazardous Materials & Contaminants, Asbestos, Lead, Mould & Fungus, PCB`S

    Untitled Document Everyday in Canada and the United States Hazardous Materials are being removed improperly contaminating the buildings we occupy. The hazardous materials including ...

  • Solar-Powered Circulation Technology Clears Out Blue-Green Algae without the Costs and Hazards of Copper Sulfate

    Untitled Document As the annual onslaught of blue-green algae (cyanobacteria) blooms continues to plague fresh water lakes and reservoirs, the use of copper sulfate to control the problem has ...


    By Medora Corporation

  • The risky business of resource recovery

    Waste management operations, like any transport business, have many risks attached to them and all operators should avoid the “Dodgy Brothers” ignore-the-risks to save costs approach! Any transport business with large vehicles working in tight city and site access areas is prone to accidents and near miss incidents. Add to that the hazards of working with lifting, loading and compacting systems. ...


    By Wastedge.com

  • Arsenic and heavy metals contamination, risk assessment and their source in drinking water of the Mardan District, Khyber Pakhtunkhwa, Pakistan

    The present study was conducted to investigate the physico-chemical characteristics in drinking water of Mardan District, Pakistan. Furthermore, water quality was evaluated for the risk assessment of arsenic and heavy metals (HMs) and their contamination sources. Representative groundwater samples of shallow and deep sources were collected in the study area. These samples were analyzed for ...


    By IWA Publishing

  • Survey of standards related to gas detectors

    Recent events both on- and off-shore shine a bright light on the need for attention to safety and to hazard reduction, prevention, and mitigation. Errant combustible or toxic gases can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. Globally, governmental and regional authorities take gas detection and system integration very seriously and require that the ...

  • Advanced engineering for ATEX solutions

    The process of disinfecting water with UV light is a proven technology for drinking and process water in many industries, however the high standards required by the offshore industry command these systems to be engineered way beyond the normal specification of many manufacturers. When a leading offshore contractor based in Malaysia required two high specification ATEX systems for operation in ...


    By atg UV Technology

  • SHEilds Christmas Gifts #1 – Electrical Safety

    Free Safety Tips for the Season It’s that time of year again! Time to start getting serious about Christmas shopping, dig out the annual decorations and of course switch on our seasonal lights. There’s an undeniably positive boost created by lights covering the inside and outside of the household; whether it’s to brighten up dark winter days, amaze your children ...


    By SHEilds Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you