hazardous area safety Articles

  • Human Error Threatens Safety in Hazardous Areas

    The top 5 problems identified in hazardous areas are Poor or no maintenance on flameproof (Ex d) enclosures. Due to corrosion—especially when equipment is installed outdoors—the Ex d protection is gone 2-3 years after installation. Incorrectly installed Ex d cable glands. Even if the combination of cable and gland is chosen correctly, the instructions on how to ...


    By Mettler - Toledo Int. Inc

  • Safety and hazards in CCS projects

    Carbon capture and storage is now on the technological tipping point – it has reached critical mass with one large-scale, fully integrated power project now almost operational at the SaskPower Boundary Dam project in Canada, using enhanced oil recovery. In the UK, following the announcements of progress at two projects, Peterhead and White Rose, the government’s competition process ...


    By Energy Institute (EI)

  • Flammable Hazards

    Flammable Hazards The difference between a gas and a vapor is that vapors arise from liquids, whereas gases are normally in a gaseous state. Flammable vapors present additional sampling concerns (for example, we must prevent vapors from returning to the liquid state during sampling). The 3 Elements of Fire Three elements must be present for a flammable ...

  • Safety and Reliability in High Mast, Light Tower and Area Lighting

    When illuminating a work area, sporting complex, roadway, or any populated area, safety and reliability are of the utmost importance. Without proper illumination, risk for accidents and injury is increased. Power outages, mechanical or equipment failure, or acts of nature can introduce unwanted hazards into the environment. Advances in LED technology have solutions that address these safety ...


    By Larson Electronics LLC

  • Safety Smart Companies: Three Workplace Hazard Observation Tips

    This week we continue to explore the themes being highlighted in 2016’s National Safety Month. Every June the National Safety Council (NSC) encourages us to raise health and safety awareness throughout our lives. Last week we talked about how “Safety Smart” employers can ...


    By Intelex Technologies Inc.

  • A Hazardous Road to Success

    Chromatotec have established themselves in the Forefront of Sulphur Analysis in Hazardous Areas. Their latest Enhancement of their MEDOR range has Augmented their Rapid Rise in this Expanding Market. Most natural gas production and exploitation sites are considered to be hazardous area. This is certainly the case when it comes to Liquefied Petroleum Gases (LPG) sites. It is vital ...


    By Chromatotec Group

  • Frostbite And Hypothermia Hazards

    Hypothermia and frostbite can be two of the serious consequences of working outdoors in winter weather. Hypothermia is a dangerous lowering of the body’s temperature by exposure to cold or wet conditions. Actually, the air temperature doesn’t have to be particularly low to cause hypothermia – just getting wet and chilled can do the same thing. Hypothermia can be fatal. ...


    By SafetySmart

  • Safety Training and Environmental Safety for Workers

    Safety training is a necessary part of an employment environment since it helps workers to remain free from harm and injury while performing their duties in the workplace. The Occupational Safety and Health Administration (OSHA) is a governmental agency that mandates, educates and enforces workplace safety practices for specific fields of employment. Employees typically learn how to safely ...


    By OSEA

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • Job Safety Analysis and Safety Alerts

    When you're working on the field, always remember to apply best practices and job safety analysis (JSA) to ensure a safe workplace. Below are insights into the JSA process, and how it helps manage occupational incidents.  ...


    By EHS Insight

  • How to Assess Fall Hazards

    Fall hazards are an ongoing concern in most workplaces and include both falls from heights as well as falls from the same level. Slips, trip and falls from both categories consistently rank among the top causes of both disabling injuries and deaths in all types of workplaces, from construction sites, to manufacturing operations to warehouses to offices. In fact, the only other category of ...


    By SafetySmart

  • Dispense Gas Safety

    What Is Dispense Gas? Inert gases such as carbon dioxide and nitrogen are used regularly within the hospitality industry. These gases, known collectively as ‘dispense gas’, are used to carbonate drinks so ...


    By Analox Sensor Technology

  • Industry Experts Address Solutions for Major Safety and Environmental Hazards and Risks Prevalent in Fossil-Fuel Power Plants

    The upcoming marcus evans HSE Excellence for Fossil Generation Conference — set to take place August 6–8, 2013, in Dallas, Texas — will address critical challenges and lessons learned in the industry to drive solution-based topics, including worksite safety management, confined space, safety training, fall ...


    By Marcus Evans

  • Know your Enemies - workplace hazards

    What’s at Stake If you and your buddies were facing a dangerous, deceptive enemy, you’d want to find out all you could about it and share any information you come up with. The fact is you do have such a treacherous enemy - the workplace hazard. What’s the Danger An unnoticed hazard can take your life in an instant, or cause you a lifetime of ...


    By SafetySmart

  • Model quality and safety studies

    The paper describes the EC initiative on model quality assessment and emphasises some of the problems encountered in the selection of data from field tests used in the evaluation process. Further, it discusses the impact of model uncertainties in safety studies of industrial plants. The model evaluation group (MEG) is a European initiative on evaluation of technical models used within the major ...


    By Inderscience Publishers

  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

  • Reducing the risk of dust explosion hazards

    In the wake of recent tragic and highly publicized dust explosions, companies are asking, 'Could that happen here?' and 'What can I do to prevent such an incident at my facility?' One approach is to manage dust explosion hazards as though they were subject to OSHA’s Process Safety Management (PSM) requirements (29 CFR 1910.119), even though dust hazards often are not covered under this ...


    By ABS Consulting

  • Preparing your company for a hazardous spill

    Documento sin título If a company ...


    By Verisk 3E

  • Compressed Gas Safety Guide

    Use and storage of any compressed gas under high pressure can be extremely dangerous if proper gas handling procedures are not observed. Moreover, chemical characteristics of specialty gases themselves can pose serious health hazards if containment is not tightly controlled. Paying close attention to a compressed gas product’s technical and safety information is invaluable for maintaining a safe, ...

  • Vacuuming Wood Dust Can be Hazardous

    It’s well known that wood dust is highly combustible, but the practice of removing it with vacuum trucks can also be dangerous, because of the potential buildup of static electricity. WorkSafeBC has issued a bulletin stating that “static electricity discharges can ignite wood dust and therefore must be eliminated or adequately controlled during vacuuming.” When wood dust or ...


    By SafetySmart

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you