hazardous dust vacuum system Articles

  • Vacuuming Wood Dust Can be Hazardous

    It’s well known that wood dust is highly combustible, but the practice of removing it with vacuum trucks can also be dangerous, because of the potential buildup of static electricity. WorkSafeBC has issued a bulletin stating that “static electricity discharges can ignite wood dust and therefore must be eliminated or adequately controlled during vacuuming.” When wood dust or ...


    By SafetySmart

  • Effective Industrial Dust Collector Strategies

    Finding the correct type of industrial dust collector for the grinding section is a must for opposing an injection mold creating shop. This is vital for health and welfare of workers and for the performance of grinding machines. Dusts produced from electrodes are graphite and copperand during the milling or grinding operation, these needs to be filtered away from the atmosphere with an ...


    By ProVent, LLC

  • Asbestos Awareness: Preventing a Hazardous Workplace

    Many on-the-job hazards are obvious... leaking machinery... dangerous chemicals... slippery floors. However, other hazards aren't so obvious. There may be no visible signals that they are present at all. That's why Asbestos is often known as 'the silent killer.' While you often can't see, taste or smell it..., prolonged periods of exposure to Asbestos can cause lung disease, cancer... even death. ...


  • VacuDry Indirect heated vacuum thermal Desorption by econ industries - case study

    With the VacuDry8 technology the energy-efficient treatment of hazardous and industrial waste as well as contaminated soil, oil sludge and secondary raw material is realized. Controlled vacuum and heat are used to separate minerals from oil, solvents, mercury and other hazardous substances.    At the core of the econ VacuDry8 process is a specially designed dryer chamber which ...


    By econ industries GmbH

  • Occupational exposures to lead-based paint in structural steel demolition and residential renovation work

    Occupational exposures to lead are characterised for a number of different lead-based paint abatement techniques in two work settings: residential renovation and structural steel demolition. Exposure levels reported during heavy structural steel demolition work involving acetylene torch cutting, welding, and abrasive blasting can be more than 100 times greater than the permissible exposure limit ...


    By Inderscience Publishers

  • Falling Through the Cracks

    An old environmental ghost has recently been reincarnated. Polychlorinated biphenyls (PCBs) provided plenty of scares in the 1970s, when studies found that the PCBs commonly used as insulators in electrical equipment (particularly transformers that leaked the substance into soil and water supplies), were not only carcinogenic, but also that PCB pollution tended to accumulate and become magnified ...


    By Full Sircle Farms

  • Prevent hospital acquired infections during construction projects

    The issue of hospital acquired infections is a serious problem. According to several sources, three to four million hospital-acquired infections occur annually, with up to 80,000 fatalities. The costs of these infections are estimated to be between $4 billion and $5 billion per year (Air-Treatment Systems for Controlling Hospital acquired Infections, HPAC Engineering, April 2, 2008).Healthcare ...

  • Pesticides Manufacturing Industry - Pollution Prevention Guidelines

    Introduction Pollution Prevention Guidelines to provide technical advice and guidance to staff and consultants involved in pollution-related projects. The guidelines represent state-of-the-art thinking on how to reduce pollution emissions from the production process. In many cases, the guidelines provide numerical targets for reducing pollution, as well as maximum ...


    By The World Bank

  • A Citizen`s Guide to Bioremediation

    What is bioremediation? Bioremediation is a treatment process that uses naturally occurring microorganisms (yeast, fungi, or bacteria) to break down, or degrade, hazardous substances into less toxic or nontoxic substances. Microorganisms, just like humans, eat and digest organic substances for nutrients and energy. In chemical terms, 'organic' compounds are those that contain carbon and hydrogen ...

  • Mercury Spill Control Procedures

    Mercury is a dangerous neurotoxin that can have damaging affects on both the central nervous system and renal system of humans. Exposure to mercury can cause serious developmental delays in children, and high level exposure is life threatening. When exposed to air, mercury vaporizes, readily becoming a dangerous aerosol that can be absorbed into the lungs and spread throughout the body. This is ...


  • OSHA announces proposed silica rule, lowering PEL, ending lengthy OMB review

    Federal efforts to protect workers from silica exposure entered a new phase Aug. 23 when the Occupational Safety and Health Administration finally announced its proposal for regulating silica dust. OSHA's proposed rule would set a permissible exposure limit (PEL) of 50 micrograms of respirable crystalline silica per cubic meter of air. The ...


    By Bloomberg BNA

  • Thermal Desorption

    Untitled Document Introduction: ...

  • Companies and people leading the restructured environmental services industry in Canada

    The landscape of environmental service providers in Canada has changed dramatically in the past four or five years, especially with mergers and acquisitions announced in recent months between some fast-growing businesses. Only a decade ago the industry was dominated by a couple of publicly-traded continental companies that gobbled up numerous small and medium-size enterprises to offer customers a ...

  • Mold, Mold Growth and Buildings

    Concern about mold exposures in buildings continues to be a significant issue. The bottom line is that mold has been around for eons and is not going away.  It will grow whenever and wherever buildings get wet and materials suitable for mold growth are present.  The following paragraphs are meant to shed light on mold issues related to microbiology, health and safety, moisture control, ...

  • Sick-building syndrome and building-related illness

    Significant health problems linked to very poor indoor air qualityIndoor Air Quality (IAQ) deals with the content of interior air that could affect health and comfort of building occupants. The IAQ may be compromised by microbial contaminants (mold, bacteria), chemicals (such as carbon monoxide, radon), allergens, or any mass or energy stressor are more prevalent than anyone could have predicted. ...

  • Properties and Behavior of Inorganics in Contaminated Soil

    Often, specific technologies may be ruled out, or the list of potential technologies may be immediately narrowed, on the basis of the presence or absence of one or more of the chemical groups. The relative amounts of each may tend to favor certain technologies. Metals may be found in the elemental form, but more often they are found as salts mixed in the soil. At the present time, treatment ...

  • Asbestos in Buildings: Practical Guidelines for Building Owners

    Practical guidelines for building owners Overview Friable asbestos-containing materials are present in many public and commercial buildings, schools and factories built before the mid-70's. Regulations in Ontario and some other provinces require building owners and property managers to put in place asbestos control programs, once they are aware of the presence of friable asbestos-containing ...


  • Managing Environment, Health and Safety Risks at the National Museums of Kenya for Sustainability

    AbstractUrban environmental policy cannot escape the dictates of global environmental requirements as stipulated by the principles of Stockholm Conference, Rio-Summit, and the Johannesburg Summit that includes multilateral environmental agreements. The National Museum of Kenya (NMK) is a public, educational, scientific and heritage management institution established in 1909. It has undergone ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you