hazardous gas Articles

  • LED Applications for Oil and Gas Refining and Processing

    Oil and gas processing facilities are unsafe due to the existence of hazardous compounds during operations. When addressing such issues, companies in the sector may deploy explosion proof lighting systems to prevent the ignition of sparks created from the electrical equipment. The adoption of LED technology in oil and gas refineries has helped reinforce key safety measures associated with ...


    By Larson Electronics LLC

  • What is the difference between a REL and a PEL?

    There is often confusion between exposure limits put out by different agencies even within the same administration. For example, here the National Institute for Occupational Safety and Health (NIOSH) establishes Recommended Exposure Limits (RELs) whereas the Occupational Safety and Health Administration (OSHA) issues Permissible Exposure Limits (PELs). Realizing the difference between the two is ...


    By ChemDAQ, Inc.

  • Treatment and Disposal of Air Pollution Control Residue

    What is APCr? Thermal waste management using Energy Recovery Facilities (ERFs) is now a well-managed and mature technology that is subject to environmental monitoring by a range of competent international bodies. These ERFs have been established as a means of diverting waste away from landfill disposal and for valorising the material and energy content of the waste. Counter to historic ...

  • Analyzer underpins growth of container inspection company

    After a career as a customs officer in the Netherlands, Wim van Tienen was well aware of the toxic gas hazards presented by some freight containers, so in 2009 he started a company, Van Tienen Milieuadvies B.V., offering gas analysis and safety advice. The company grew quickly and now employs 23 staff. Wim attributes a large part of this success to the advanced FTIR gas detection and analysis ...


    By Gasmet Technologies Oy

  • Choosing the Right H2S Analyzer for Your Specific Application

    Not all H2S analyzers are created equal, and certain H2S analyzers work better on different applications than they do others. Significant amounts of time, money and headaches can be saved by learning about the different H2S analyzer principles of operation and choosing the correct analyzer for your ...


    By Analytical Systems Keco

  • Tire Shredding: The Best Alternative

    From cars and trucks to planes, tractors, and forklifts, tires are used for a wide variety of vehicles. And those tires don’t last forever. Regardless of how many miles a tire travels, it should not be used longer than ten years past its manufacture date, as the rubber will grow brittle and can crack. This isn’t usually a problem, though, since most tires are replaced within three or ...


    By ECO Green Equipment

  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

  • Flammable Hazards

    Flammable Hazards The difference between a gas and a vapor is that vapors arise from liquids, whereas gases are normally in a gaseous state. Flammable vapors present additional sampling concerns (for example, we must prevent vapors from returning to the liquid state during sampling). The 3 Elements of Fire Three elements must be present for a flammable ...

  • A Workplace-generated Hazardous Substance - Exhaust Gas: Hazardous Substances Case Study

    This Case Study has been prepared as one of a series relating to hazardous substances in the workplace. This case study examines use of a machine which generates exhaust gas. Here the Workplace Health and Safety Regulation Part 13: Hazardous Substances does not apply. In this instance, the Advisory Standard for Hazardous Substances applies. ...


  • Indoor Air Quality and Hazardous Gas Detection

    Indoor air contaminants come in a variety of forms and originate from multiple sources. Interactions between building materials and furnishings, activities and equipment inside the building, internal temperature and relative humidity, filtration and ventilation system operations, climate and building occupants all contribute to the indoor air quality (IAQ) in commercial, industrial, residential ...

  • Monitoring Multiple Gas Hazards in Ice Arenas

    The equipment used in an arena such as an ice re-surfacer, ice edger, floor sweepers, lift trucks and other special equipment are more often powered by fuel than electricity. The exhaust produced by the gas, propane or diesel fuel powered machines emits, into the air, carbon monoxide (CO), nitrogen dioxide (NO2) and particulates. Ammonia (NH3) is commonly used in the ice chiller mechanical room ...

  • Health Hazards of Welding

    At present, it is estimated that more than one million workers are employed as welders worldwide (Sundin, 1998), with more than three million performing welding intermittently as part of their work duties (Sferlazza and Beckett, 1991). Manual metal arc welding (MMAW) and flux core arc welding (FCAW) are two commonly used procedures in the construction industry and in numerous other industrial ...


    By Valahia University

  • GIS in Petro Gas Pipeline Integrity and Hazard Consequence Analaysis

    GIS APPLICATION FOR PETRO & GAS PIPELINES SYSTEMS The major challenges facing the Petro and Gas pipeline supply and distribution Industry are: Isolated and distant location of operating and service areas from the well drilling locations and source points  Distributed customers with varying patterns of consumption. Variety in plant and equipment with periodic operational and ...


  • Classifying Hazardous Areas

    The IEC is composed of approximately 40 countries including the United States. The purpose of the IEC is to establish standards for a wide variety of electrical products with the intent of encouraging international trade. The IEC has assigned a technical committee, TC 31, to develop recommendations covering equipment, testing procedures and classification standards for areas where the potential ...

  • Not All Hazards are the Same: Design considerations for matching flame and gas hazards to detector technologies

    Not all flame and gas hazards in facilities are the same, therefore the detection technology chosen should be specific to the type of hazard to be detected. How do users select technologies to see certain fires or detect certain gases? The intent of this paper is to give a broad introduction to the selection and use of flame and gas detector technologies. We will answer questions such as these: ...

  • The Hazards of Being in a Beauty Salon

    There are many health risks associated with the beauty industry due to the chemicals found in the products. We are all affected by these chemicals every time we go to the beauty salon. Many of the products found in these salons are classified as hazardous and extreme caution should be taken into consideration when using these products. They’re made for professional use only; therefore, ...

  • A Two Channel Gas Detector for Monitoring Hazardous Gases in the Workplace

    The potential for exposure to hazardous gases is a concern in many workplace environments. To ensure the safety of the workers, equipment, and the facility, areas presenting a gas hazard should be monitored by gas detectors. Commercial buildings that share a warehouse with manufacturing and/or service work in the back and offices in the front are a prime place for harmful gases and vapours ...

  • The Influence of PVC on the Quantity and Hazardousness of Flue Gas Cleaning Residues from Incineration

    The study estimates the influence of PVC on the quantity and hazardousness of flue gas residues from incineration. The analysis has been carried out on both theoretical and practical terms. A distinction between dry, semi-dry and wet gas treatment systems has been made. The influence of PVC has been assessed on the combustion steps and therefore on the distribution of chlorine and other ...

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • Hazardous chemicals and proper storage solutions

    Many acceptable categorical storage schemes have been proposed and used by laboratories in academic, industrial, government and medical institutions. The common features uniting all these plans is the separation of incompatible materials. The differences in these various storage schemes arises in the number of groups that should be established for segregation purposes. The ten most commonly cited ...


    By US Chemical Storage

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you