hazardous gas detector Articles

  • Axetris Sensor Field Test

    The Axetris LGDs were operated continuously for two years. After intensive laboratory testing, they went out into the field in 2015. Axetris was able to test the functionality of its sensors under real-life conditions thanks to the support of the Linth waste incineration plant. The gas concentration measuring devices called laser gas detectors ( ...


    By Axetris Ag

  • A Two Channel Gas Detector for Monitoring Hazardous Gases in the Workplace

    The potential for exposure to hazardous gases is a concern in many workplace environments. To ensure the safety of the workers, equipment, and the facility, areas presenting a gas hazard should be monitored by gas detectors. Commercial buildings that share a warehouse with manufacturing and/or service work in the back and offices in the front are a prime place for harmful gases and vapours ...

  • Survey of standards related to gas detectors

    Recent events both on- and off-shore shine a bright light on the need for attention to safety and to hazard reduction, prevention, and mitigation. Errant combustible or toxic gases can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. Globally, governmental and regional authorities take gas detection and system integration very seriously and require that the ...

  • Not All Hazards are the Same: Design considerations for matching flame and gas hazards to detector technologies

    Not all flame and gas hazards in facilities are the same, therefore the detection technology chosen should be specific to the type of hazard to be detected. How do users select technologies to see certain fires or detect certain gases? The intent of this paper is to give a broad introduction to the selection and use of flame and gas detector technologies. We will answer questions such as these: ...

  • CO2 Gas Hazards in the Brewing Industry

    The hazards associated with CO2 in the brewing industry are well known, yet people still die needlessly every year in tragic and completely avoidable accidents in breweries. Just last year in Germany, which has a good safety record, two workers died in separate incidents at the same brewery. In the first incident, the owner was found dead with his head and torso in a beer mixing tank. It is ...

  • Explosion Proof vs Intrinsically Safe Gas Detectors

    It only takes a spark to start a fire or cause an explosion, especially when flammable gases or vapours are present under the right conditions. There are industries that operate in these types of hazardous environments where the potential for explosions is extremely high, such as chemical plants, oil refineries, paint shops, cleaning facilities, tanks and loading facilities for flammable gases, ...

  • A Four Channel Gas Detector for Wastewater Treatment Plants

    Common hazardous gases found in wastewater treatment plant facilities are hydrogen sulphide, methane, ammonia, carbon monoxide, chlorine and oxygen deficiency. Some facilities may also use ozone, chlorine dioxide or sodium hypochlorite with the chlorine during the sanitization treatment process. Furthermore, sulphur dioxide is often used to de-chlorinate the water once the treatment process is ...

  • Benefits of HART Communication-Enabled Gas and Flame Detectors

    Catastrophic results can occur when a fire or a flammable/toxic gas release goes undetected in any petrochemical facility. For early warning and prompt hazard mitigation, flame detectors and gas detectors are essential tools. Clear, usable, diagnostic information from these detection instruments is extremely valuable in ensuring the devices are properly maintained, tested, and poised to protect ...

  • A Guide to Gas Detector Tubes. Your Questions Answered

    Gas detector tubes are easy to use, are low cost, and the method is intrinsically safe, allowing it to be deployed in all industries. Because detector tubes don’t require calibration, users see the benefits of this technology over electronic gas detectors due to their ease of ...


    By a1-cbiss

  • Selecting and Placing Gas Detectors for Maximum Application Protection

    Many industrial processes involve dangerous gases and vapors: flammable, toxic, or both. With the different sensing technologies available, and the wide range of industrial applications that exist, selecting the best sensor and locating them properly for the job at hand can be a challenge. To ensure a high level of safety, know the latest sensing technologies, which technology is best for the ...

  • Gas detector communication technology for offshore oil and gas platforms

    In few applications is safety as important as on offshore oil and gas platforms. Explosive hazards from hydrocarbon gases and vapours are an ever-present risk, whilst toxic hydrogen sulphide gas and depleted oxygen environments can pose significant risks to personnel. Gas detectors are therefore essential to provide dependable early warning of gas hazards. Gas detectors are permanently installed ...

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • PureAire Universal Gas Detector Offers Protection Against Toxic Levels of Ammonia

    In March of 2016, an ammonia gas leak at a seafood processing plant in Boston left one worker dead. The fumes at the plant were so powerful that firefighters could not promptly enter the scene to mitigate the gas leak and try to save the staff member until much later. Reports show that 5,300 pounds of ammonia gas leaked out of the plant. If you work with ammonia at your facility, learn ...

  • Gas Detection in Recreation Facilities: Can the same detector work for pools and arenas?

    It is not uncommon for the same recreational facility to offer both skating and swimming amenities, two very different environments with different potential gas hazards. Given the fact that there is a possibility of 6 different types of gas to monitor and the large area between the two types of facilities, a single detector will not provide the monitoring requirements for both areas. It is ...

  • The Hazards of Being in a Beauty Salon

    There are many health risks associated with the beauty industry due to the chemicals found in the products. We are all affected by these chemicals every time we go to the beauty salon. Many of the products found in these salons are classified as hazardous and extreme caution should be taken into consideration when using these products. They’re made for professional use only; therefore, ...

  • Do you know your hazardous gases?

    I’ve never had a problem determining the difference between Ant and Dec as I was an avid fan of Byker Grove as a child. But many people struggle. To avoid future confusion PJ was the one blinded in an unfortunate paint balling incident and Duncan had floppy hair. For any non UK readers the same might apply to Mary-Kate and Ashley Olsen – although I’m pretty certain they always ...


    By Analox Sensor Technology

  • Gas safety in confined spaces

    An engineer repairs buried cables; a plant manager enters a small plant room; a contractor inspects the lining of a sewage pipe.  All these personnel face a common danger, despite working in widely different industries.  Gas-related injury poses a serious threat in any confined space where the free movement of air is limited.  ...

  • Detect Hydrogen Gas and Flames

    Under day-to-day conditions, people cannot see, smell, or taste the presence of hydrogen gas. Hydrogen, however, is very flammable and requires only a small amount of energy to ignite. In fact, if leaking from a pipe at a high enough pressure, hydrogen gas can self ignite without the aid of an external energy source. Working together, ...

  • Gas safety in confined spaces

    A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and ...

  • Gas Safety in Confined Spaces

    Introduction A confined space is any space large enough for someone to enter and perform assigned work, which has limited means of entry or exit, and which is not designed for continuous worker occupancy. This covers just about every industry, including utilities, construction, hydrocarbon exploration and processing, petrochemicals, marine, agriculture, food processing and brewing, as ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you