hazardous waste incineration system Articles

  • Incineration

    Introduction: High temperatures, 870 to 1,200 °C (1,400 to 2,200 °F), are used to volatilize and combust (in the presence of oxygen) halogenated and other refractory organics in hazardous wastes. Often auxiliary fuels are employed to initiate and sustain combustion. The destruction and removal efficiency (DRE) for properly operated incinerators exceeds the 99.99% requirement for hazardous waste ...

  • Incineration of hazardous wastes from the petroleum industry in Nigeria

    Persistent hazardous wastes are produced in the recovery, processing and upgrading of crude petroleum in Nigeria. However, recent developments in environmental pollution control are drawing increasing attention to the problems of hazardous wastes. The ever-increasing need to control these wastes from the petroleum industry often compels the chemical engineer to specify methods of treatment and ...


    By Inderscience Publishers

  • Waste Incineration Upgrades at the Eastman Chemical Company

    INTRODUCTION Eastman Chemical Company, headquartered n Kingsport, TN, is an international supplier of organc chemicals, fibers anci plastics with annual sales of approximately $46 biNion and approximately 5300 customers worldwide. Tennessee Eastman Division, also located in Kingsport, is the company’s largest manufacturing fadllity The nine hundred acre site contains manutacturing facilities as ...


  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • An optimisation model for transportation of hazardous wastes

    The North American Free Trade Agreement (NAFTA) has considerably increased the transport of materials along the US-Mexico borders. Maquiladoras are business entities that are structured to take relative advantages offered by both countries to develop cost-effective products. Current Mexican regulations require that hazardous wastes generated by US companies be shipped back for proper disposal. ...


    By Inderscience Publishers

  • AVA Technology for Hazardous Waste Treatment - Case Study

    AVA has developed systems for pre-treating hazardous waste prior to incineration, which leads to higher throughput performance in combination with lower construction and maintenance costs and additional low pollution emissions, in comparison to conventional techniques. The system is based on the principal that constant gross calorific values and regular piece sizes together with consistency of ...


    By AVA - Huep GmbH u. Co. KG

  • Study on Hazardous Household Waste with a main Emphasis on Hazardous Chemicals

    Introduction The aim of this study is to evaluate national experiences of the management of hazardous products likely to become hazardous household waste (HHW), and to make proposals for strategies for the appropriate management of such products within a lifecycle perspective. The study covers the fifteen Member States and two Accession Countries, namely Hungary and Romania. The data available at ...

  • Hazardous Waste Generation in Selected European Countries: Comparability of Classification Systems and Quantities

     Executive summary Background & methodology The purpose of this report is to review existing data on hazardous waste for the period 1993-1996 and to try to improve the comparability of the data. The report has been prepared by the European Topic Centre on Waste (ETC/W) as part of the work programme of the European Environment Agency (EEA). ...

  • Emission Performance Results for a Liquid Waste Incinerator upgraded to meet the HWC MACT Standards

    Abstract Eastman Chemical Company operates three hazardous waste incinerators at its facility in Kingsport, Tennessee, one liquid waste incinerator and two rotary kilns. The air pollution control systems for these incinerators are being upgraded to meet the MACT standard for existing hazardous waste incinerators. The upgraded air pollution control systems include a vertical, rapid-quench ...


  • Emissions Performance Results for a Liquid Waste Incinerator Upgraded to Meet the HWC MACT Standards

    ABSTRACT Eastman Chemical Company operates three hazardous waste incinerators at its facility in Kingsport, Tennessee, oneliquid waste incinerator and two rotary kilns. The air pollution control systems for these incinerators are beingupgraded to meet the MACT standard for existing hazardous waste incinerators. The upgraded air pollution controlsystems include a vertical, ...


  • Incineration of Explosives-Contaminated Soil and Reactive RCRA Waste at the Former Weldon Spring Ordnance Works

    ABSTRACT This paper presents the results of a Combustion Risk Assessment (CRA) and Trial Burn Testing Program for a transportable hazardous waste incinerator at the former Weldon Spring Ordnance Works (WSOW), Missouri, USA. From 1942 to 1945, the Ordnance Works was the largest TNT manufacturing plant in the world, producing approximately 1 million pounds of TNT per day. The Transportable ...


    By Weston Solutions, Inc

  • High technology comes to Hazardous waste disposal – Case Study

    Skyrocketing hazardous waste disposal costs for the USC/ Division, of C.R. Bard, Inc., Billerica, Massachusetts led them to a high technology solution. USC/, a medical products manufacturer that develops and produces angioplasty catheters, had seen its solid hazardous waste disposal costs rise to almost $500 per 55- ga/lon drum, excluding costs associated with inplant storage, handling, and ...


    By Waste Control Systems Inc

  • Guidance on Hazardous Waste Rules Issued Amid Delays to New Regime

    Technical guidance on how to interpret the new EU definition of hazardous waste has been published by the Environment Agency to help industry navigate a course through a bewildering range of semi-implemented EU law. 1 The new system, soon to replace the UK's 'special waste' regime, will significantly increase the range of wastes falling under special controls, but regulations paving the way for ...

  • Toxic and Hazardous Materials in Electronics

    Untitled Document Introduction In October 2000 Environment Canada released a report called Information Technology (IT) and Telecommunications (Telecom) ...

  • Swan Hills Treatment Centre – Canada`s only fully-integrated hazardous waste treatment facility

    Untitled Document Since the enactment of environmental laws and regulations in Canada and the United States in the 1970s and 1980s, many treatment and disposal options for hazardous ...


    By Baum Publications Ltd.

  • Managing compliance: Hazardous Waste Management: Understanding EPA and state-level categories, numbers and reports

    Many companies often are surprised to discover exactly how much hazardous waste they generate. A company can be considered a hazardous waste generator if it uses, produces or stores anything from oil-based paint to hydrofluoric acid. If a company uses, stores or generates a certain amount of materials ranging from oil-based paint to hydrofluoric acid, it is required to register with EPA and ...


    By 3E Company

  • Marine Waste Management

    The Reasons of Marine Waste Management New rules from IMO (International Maritime Organization), adopted in July 2011, imply substantial changes for all ship or rig types as early as January 2013. By applying waste management, the ship or rig owner or operator takes control of waste handling with the aim of achieving some or all of the following objectives: 1) To fulfill ...


    By Harden Industries Ltd.

  • Toxins Found in E-Waste

    One of the worst effects of a skyrocketing, global e-waste crisis is the risk of toxic contamination for the environment and communities. In fact, delving into the many chemical and heavy metal materials that make up most electronic devices, it seems that toxins and electronics go hand in hand. Though many manufacturers of electronic devices are finding innovative ways to work around toxins found ...

  • Defining solid waste

    Simultaneous to the publication of the final National Emission Standards for Hazardous Air Pollutants for Boilers (the Boiler NESHAP) and the Commercial and Industrial Solid Waste Incinerator (CISWI) Rules, EPA issued a new regulation that for the first time defines what materials are a non-hazardous solid waste when combusted. This rule, Solid Wastes Used as Fuels or Ingredients in Combustion ...


    By Trinity Consultants

  • Environmental Sensors in Waste Management

    Issue: As part of an increasing sentiment among European consumers that environmental protection is important, concern about the impact of landfill is growing. Sensor technology makes it possible to measure and control inputs to landfill sites and pollutants arising from them. However, the exploitation - or uptake - of such technology has been lower than expected in the waste management sector. ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you