hazardous waste incineration system Articles

  • Supersonic Cleanup

    New onsite remediation process for PCB-contaminated soils The PCB cleanup market is currently estimated to be $40-billion worldwide. There are several PCB remediation companies, but most require energy-intensive incineration, the dangerous and costly transportation of contaminated ...


  • EPA proposes updates to CISWI rules

    On June 4, 2010, the U.S. EPA proposed updates to the Standards of Performance for New Stationary Sources (NSPS) for Commercial and Industrial Solid Waste Incineration (CISWI) Units (NSPS Subpart CCCC) and Emission Guidelines (EG) for Existing CISWI Units (EG Subpart DDDD), collectively referred to as the "CISWI Rules." In order to describe the proposed updates to the CISWI Rules, it is necessary ...


    By Trinity Consultants

  • September 2005 - Regulatory Update

    The Onyx Environmental Services - Environmental, Health, Safety, and Transportation department is pleased to present the Monthly Regulatory Update. The update contains a brief summary of the proposed and final rules from EPA, OSHA, and DOT published in the Federal Register in the past calendar month. If you have any questions, comments, or suggestions regarding the Monthly Regulatory Updates, ...

  • Practical Implementation of EN-14181in Particulate Monitoring - Case Study

    Introduction This case study summarises the results of implementing particulate monitoring according to EN-14181 in a municipal incinerator operated by SUA in Teesside, UK, with a ProScatter M type particulate instrument (Model PCME QAL 181). It also provides a comparison of results for monitoring the same stack with an ElectroDynamic particulate instrument (Model PCME QAL 991). This case ...


    By PCME Ltd

  • The use of thermal plasma technology for treating air pollution control residues

    Energy from waste (EFW) is an exciting industry to be in right now in the UK. As pointed out by Euston Ling and Dr. Adam Read's article "The Shifting Landscape for Renewable Energy in the UK" {Waste Advantage Magazine, June 2011), the EFW capacity in the UK is set to grow strongly in the next 10 years, with some commentators predicting a three-fold increase in EFW capacity from the current 4 ...


    By Waste Advantage Magazine

  • Carbon Injection Proves Effective In Removing Dioxins

    Untitled Document Summary: During the past several years, there has been growing concern about emission of polychlorinated di-benzo-p-dioxins and polychlorinated ...

  • Thermal Oxidizer

    THERMAL OXIDIZER   PRINCIPLE OF COMBUSTION The primary function of the Thermal Oxidizer is to destroy the contaminants in the exhaust coming out of a process.  The operation of the Thermal Oxidizer is based on the principle of combustion.  The process of combustion is the most commonly used method to control emissions of organic compounds. ...


    By Epcon Industrial Systems, LP

  • Common Treatment Technologies for Fuels in Soil, Sediment, and Sludge

    Common treatment technologies for fuels in soil, sediment, and sludge include biodegradation, incineration, SVE, and low temperature thermal desorption. Incineration is typically used when chlorinated SVOCs are also present with fuel, and not specified for fuel-only contaminated soil, sediment, or sludge. All types of biodegradation, both in situ or ex situ, can be used to remediate soils: ...

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Vapor-Phase Biofilters Show Promise for Treating High VOC Emissions.

    Evaluating the Feasibility of Natural AttenuationUsing natural attenuation to remediate organic compounds in groundwater has gained popularity. In some cases, this process can reduce contaminant levels to below risk-based corrective action criteria or regulatory standards without implementing additional remedial action alternatives. However, it is often difficult to prove that natural ...


  • Vapor-Phase Biofilters Show Promise for Treating High VOC Emissions

    Evaluating the Feasibility of Natural AttenuationUsing natural attenuation to remediate organic compounds in groundwater has gained popularity. In some cases, this process can reduce contaminant levels to below risk-based corrective action criteria or regulatory standards without implementing additional remedial action alternatives. However, it is often difficult to prove that natural ...


  • GWT BIO PS10 Series Case Study- Petrochemical Sludge Reduction

    GWT BIO™ Series Natural Microbiological Product Petroleum Refinery Field Case Study This field case study describes how our GWT BIO PS10 series natural microbiological product provides an alternate solution for disposal of hazardous organic compounds and offers a long term, cost-effective solution to the toughest waste water ...

  • Pyrolysis

    Introduction: Pyrolysis is formally defined as chemical decomposition induced in organic materials by heat in the absence of oxygen. In practice, it is not possible to achieve a completely oxygen-free atmosphere; actual pyrolytic systems are operated with less than stoichiometric quantities of oxygen. Because some oxygen will be present in any pyrolytic system, nominal oxidation will occur. If ...

  • Final CISWI rule

    On March 21, 2011, in parallel with publication of the Boiler National Emission Standard for Hazardous Air Pollutants (NESHAP) rules and the Non-Hazardous Secondary Material (NHSM) rule, EPA promulgated the final updates to the New Source Performance Standards (NSPS) and Emission Guidelines (EG) for Existing CISWI Units, collectively referred to as the “2011 CISWI Rules.”1 The 2011 ...


    By Trinity Consultants

  • Flux force condensation scrubbing

    Flux force condensation scrubbing technology is used to capture fine (submicron) particulate at extremely high efficiency. It is a preferred method when using wet scrubbing to collect and control dioxins from combustion sources. As an added benefit, through the use of condensation, the water vapor plume commonly associated with a wet scrubbing system can be effectively eliminated. The overall ...


    By Bionomic Industries Inc.

  • A Citizen`s Guide to Chemical Dehalogenation

    What is chemical dehalogenation? Chemical dehalogenation is a chemical process to remove halogens (usually chlorine) from a chemical contaminant, rendering it less hazardous. Halogens are a class of chemical elements that include chlorine, bromine, iodine, and fluorine. Polychlorinated biphenyls are halogenated compounds that once were used in high voltage electrical transformers because they ...

  • New boiler MACT and affiliated rules proposed

    EPA proposed three related rules (with final rules expected by December 16, 2010), intended to reduce the emission of hazardous air pollutants (HAPs) from industrial, commercial, and institutional boilers and process heaters as well as commercial and industrial solid waste incinerators. Simultaneously, it also proposed a definition of solid waste that could potentially affect some units currently ...


    By Trinity Consultants

  • Case study - SP, Technical Research Institute of Sweden

    Customer: SP, Technical Research Institute of Sweden Project: WetESP for Fire Laboratory Many fire tests are made in full scale. Example for fire tests can be engine rooms, vehicles, store houses, compartments etc. Most of the tests will include ignite phase, full fire and extinguishing. The ignite phase is sooting, full fire will give high temperatures ...


    By Envibat AB

  • Trace Analysis of PAHs using EPA methods 3541, 3545 and 8100

    The Extraction System B-811 and the Syncore Analyst parallel concentrator from Buchi as well as the Pressurized Solvent Extractor from Applied Separations were evaluated for the pretreatment of samples containing PAHs. Recoveries of extraction and subsequent concentration using acetone-n-hexane (1+1) were 70-95% for 2 ring and 90-100% for less volatile 3-5 ring PAHs. A good precision (95% ...


    By BÜCHI Labortechnik AG

  • Asian Paints minimizes environmental impact and maximizes new operational efficiencies

    Asian Paints Ltd. operates in 22 countries around the world. It maintains 27 paint manufacturing facilities and serves consumers in 65 countries. As a truly global enterprise, Asian Paints is aware of the impact its operations have on the environment and is strongly committed to following the latest best practices for “green productivity.” Specifically, the company is working to ...


    By IHS Markit

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you