hazardous waste incinerator Articles

  • Incineration

    Introduction: High temperatures, 870 to 1,200 °C (1,400 to 2,200 °F), are used to volatilize and combust (in the presence of oxygen) halogenated and other refractory organics in hazardous wastes. Often auxiliary fuels are employed to initiate and sustain combustion. The destruction and removal efficiency (DRE) for properly operated incinerators exceeds the 99.99% requirement for hazardous waste ...

  • Hazardous Waste Incineration Slag Optimisation by Additives

     Abstract Rotary kiln incineration combined with the disposal of residual slag on landfills defined by German landfill regulations is the most acceptable treatment for hazardous waste with respect to the environment. The objective of research is to optimize the elution behavior of HWI-slag. Quality-improved slags may be disposed off on cheaper landfill sites still applying to the landfill ...


  • Incineration of hazardous wastes from the petroleum industry in Nigeria

    Persistent hazardous wastes are produced in the recovery, processing and upgrading of crude petroleum in Nigeria. However, recent developments in environmental pollution control are drawing increasing attention to the problems of hazardous wastes. The ever-increasing need to control these wastes from the petroleum industry often compels the chemical engineer to specify methods of treatment and ...


    By Inderscience Publishers

  • The Operation And Optimization of R.C.R.A. Permitted Liquid Injection Hazardous Waste Incinerators

    BASF Corporation in Hannibal, MO has operated multiple liquid incinerators for more than 20 years, burning various liquid wastes on a campaign basis. The composition of these wastes range from high organic content liquids to aqueous wastes. ...

  • How to deal with hazardous waste?

    At present,hazardous waste is a facing an increasingly serious environmental problem .so the mainstream of industrial waste disposal methods: curing landfill, biochemical method, incineration disposal method. Other hazardous waste disposal methods include high temperature steam sterilization, microwave, plasma incineration, pyrolysis incineration, wet air ...


    By Harden Industries Ltd.

  • Axetris Sensor Field Test

    The Axetris LGDs were operated continuously for two years. After intensive laboratory testing, they went out into the field in 2015. Axetris was able to test the functionality of its sensors under real-life conditions thanks to the support of the Linth waste incineration plant. The gas concentration measuring devices called laser gas detectors ( ...


    By Axetris Ag

  • Management of Hazardous Wastes

    ' Management of hazardous waste is a growing concern in many countries. The long-term impacts and costs of improper disposal can be very high and the emphasis must be on prevention. A comprehensive management system should include (i) policies, institutions and effective regulations and (ii) adequate and acceptable disposal facilities (either public or private). This note outlines the key ...


    By The World Bank

  • On-Site Incineration Tames Arsenal Waste Mixture

    Toxic wastes from various chemical processing activities at Rocky Mountain Arsenal (RMA) had accumulated in on-site evaporation basins over many years. The highly corrosive wastes, which posed environmental and potential health hazards, were by-products of the U.S. government’s chemical weapons program during World War 11 and its later weapons disposal program, as weIl as sorne pesticide ...


  • Hazardous Waste Disposal

    Untitled Document Overview We're all aware of the importance of following safety precautions when we work with hazardous chemicals. ...


  • Waste Incineration Upgrades at the Eastman Chemical Company

    INTRODUCTION Eastman Chemical Company, headquartered n Kingsport, TN, is an international supplier of organc chemicals, fibers anci plastics with annual sales of approximately $46 biNion and approximately 5300 customers worldwide. Tennessee Eastman Division, also located in Kingsport, is the company’s largest manufacturing fadllity The nine hundred acre site contains manutacturing facilities as ...


  • Tracking chiral polychlorinated biphenyl sources near a hazardous waste incinerator: Fresh emissions or weathered revolatilization?

    The Swan Hills Treatment Centre (SHTC), located in central Alberta, is the primary facility in Canada for incinerating polychlorinated biphenyls (PCBs). Past studies have shown significant contamination by PCBs and other pollutants of the immediate surrounding region. However, it is unclear whether the major source of contamination to the region's atmosphere is historical release incidents or ...


    By John Wiley & Sons, Ltd.

  • An optimisation model for transportation of hazardous wastes

    The North American Free Trade Agreement (NAFTA) has considerably increased the transport of materials along the US-Mexico borders. Maquiladoras are business entities that are structured to take relative advantages offered by both countries to develop cost-effective products. Current Mexican regulations require that hazardous wastes generated by US companies be shipped back for proper disposal. ...


    By Inderscience Publishers

  • A chance to drive hazardous waste policy

    The proliferation of energy-from-waste (EfW) power plants is making a significant contribution to the UK’s efforts to end its reliance on harmful fossil fuels. But while EfW plants provide a solution to municipal waste, they also produce a low amount of hazardous waste in the form of air pollution control residue (APCr). Despite numerous solutions existing that process and reuse APCr ...

  • Study on Hazardous Household Waste with a main Emphasis on Hazardous Chemicals

    Introduction The aim of this study is to evaluate national experiences of the management of hazardous products likely to become hazardous household waste (HHW), and to make proposals for strategies for the appropriate management of such products within a lifecycle perspective. The study covers the fifteen Member States and two Accession Countries, namely Hungary and Romania. The data available at ...

  • AVA Technology for Hazardous Waste Treatment - Case Study

    AVA has developed systems for pre-treating hazardous waste prior to incineration, which leads to higher throughput performance in combination with lower construction and maintenance costs and additional low pollution emissions, in comparison to conventional techniques. The system is based on the principal that constant gross calorific values and regular piece sizes together with consistency of ...


    By AVA GmbH u. Co. KG

  • Hazardous waste cleans up its act - Case Study

    Instead of landfill, incineration is being used increasingly in the UK to dispose of waste while recovering energy. The processes for controlling air pollution at these facilities creates a hazardous waste that represents approximately 3.5% of the original waste input by mass. Around 170,000 tonnes of Air Pollution Control (APC) residue, the hazardous by-product of incineration, is created every ...

  • Effect of drying on leaching testing of treated municipal solid waste incineration APC-residues

    Air-pollution-control (APC) residues from waste incinerators are hazardous waste according to European legislation and must be treated prior to landfilling. Batch and column leaching data determine which type of landfill can receive the treated APC-residues. CEN standards are prescribed for the batch and column leaching test; however, these standards do not specify whether or not the residue ...


    By SAGE Publications

  • Emissions Performance Results for a Liquid Waste Incinerator Upgraded to Meet the HWC MACT Standards

    ABSTRACT Eastman Chemical Company operates three hazardous waste incinerators at its facility in Kingsport, Tennessee, oneliquid waste incinerator and two rotary kilns. The air pollution control systems for these incinerators are beingupgraded to meet the MACT standard for existing hazardous waste incinerators. The upgraded air pollution controlsystems include a vertical, ...


  • Emission Performance Results for a Liquid Waste Incinerator upgraded to meet the HWC MACT Standards

    Abstract Eastman Chemical Company operates three hazardous waste incinerators at its facility in Kingsport, Tennessee, one liquid waste incinerator and two rotary kilns. The air pollution control systems for these incinerators are being upgraded to meet the MACT standard for existing hazardous waste incinerators. The upgraded air pollution control systems include a vertical, rapid-quench ...


  • Incineration of Explosives-Contaminated Soil and Reactive RCRA Waste at the Former Weldon Spring Ordnance Works

    ABSTRACT This paper presents the results of a Combustion Risk Assessment (CRA) and Trial Burn Testing Program for a transportable hazardous waste incinerator at the former Weldon Spring Ordnance Works (WSOW), Missouri, USA. From 1942 to 1945, the Ordnance Works was the largest TNT manufacturing plant in the world, producing approximately 1 million pounds of TNT per day. The Transportable ...


    By Weston Solutions, Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you