hdpe bottle Articles

  • Redwave - separation of transparent and white HDPE

    REDWAVE - sensor based sorting machines - optimise the separation of recyclable plastic materials: Upon customer request the separation of transparent and white HDPE bottles has been realized for the first time in a sorting plant. It is a challenging task as hardly any difference can be detected in the colour spectrum between transparent and white bottles. In ...

  • Recycle plastic HDPE Crate Moulds

    According the appliance, usually we classify the plastic crate into following: Industry large plastic crates/box/container moulds Agriculture plastic crates moulds for vegetables,fruits, fish... Plastic ...


    By Focare Mould Co.,Ltd.

  • Hanbury Plastic Recycling – Stoke on Trent, UK case study

    CUSTOMER HPR Limited creates high quality plastic feedstock materials, by sorting co-mingled commercial, industrial and post-consumer waste into separated polymer streams of high purity since 2011. HPR Limited process 40,000 tonnes/year of mixed kerbside collected plastic material. SITUATION HPR were looking for a solution to sort efficiently ...

  • What can I use to filter my mobile phase?

    If you are using mobile phase that contains salts or, generally, any components that are weighed out for its preparation, you will need to filter the solution before using with HPLC or UHPLC. The most common type of filtration is membrane microfiltration. We sell an extensive group of products for this and they are discussed very well in a blog ...


    By Restek Corporation

  • National Mixed Rigid Plastic Bale Composition Study

    Executive Summary - Summer 2015 Overview of the APR Rigid Plastics Recycling Committee The Association of Post Consumer Plastics Recyclers (APR), North America’s largest alliance of plastics reclaimers, represents companies totaling over 94% of the post-consumer plastic recycling processing capacity.   APR is constantly seeking new ways to ...

  • Tailor-made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. ...

  • Taylor made washing lines for wet recycling of conterminated plastics

    NEUE HERBOLD Maschinen- und Anlagenbau GmbH, located in Sinsheim/Germany manufactures and sells complete washing lines for the recycling of plastics waste. Prior to re-pelletizing the plastic waste must be size reduced, washed and if necessary foreign materials separated. NEUE HERBOLD washing lines, produce granules or flakes with a high quality even at today's ...

  • SOCAVER Thermal Gas Supply - Case Study

    SOCAVER (Société Camerounaise de Verrerie) is a subsidiary of the leading Cameroon brewery, SABC (Société Anonyme des Brasseries du Cameroun). SOCAVER, which is the only glass factory in the Central Africa region, blew its first bottle on 1 July 1970 and today supplies a host of African countries with its products. Specialising in the manufacture of hollow glass, ...


    By Victoria Oil & Gas Plc

  • London Thames Gateway Closes Recycling Loop

    Closed Loop Environmental Solutions (trading as Visy Closed Loop) was established in Australia in 2001, and has since grown to be a world leader in environmental packaging and recycling solutions. Visy Closed Loop operates packaging recycling programmes for companies and organisations such as Qantas and the Australian Grand Prix. Closed Loop London was launched in 2004 in response to the levels ...


  • ‘Kyoto cost’ of various production and recycling processes

    ‘Kyoto cost' of various production and recycling processes: An interesting take on the the total CO2 emissions released during the lifetime of various containers used in the manufacturing and delivery of bottled water and other fluid products typically consumed in North America ...


    By Baum Publications Ltd.

  • High-innovative and crucial investment added great value for Chania, Greece

    Overview The DEDISA waste management plant is located in the prefecture of Chania, which is a prefecture of the island of Crete, in the south of Greece. This integrated waste-processing centre serves a population of 155 000 inhabitants, which represents around 25% of the island’s total population. The Chania area also provides 88,000 beds for tourists, and most of the ...


    By TOMRA Sorting GmbH.

  • New sorting plant for dry commingled and C&I waste in Nottingham

    The recycling company Wastecycle in Nottingham expects to process in excess of 45,000t / year and are pleased that the implementation of the plant has allowed them the flexibly to achieve positive results from the various waste streams. The management of Wastecycle asked KMH Systems and REDWAVE to assist them in developing together a new plant based on the following objectives: Increase ...

  • Case study - Wastecycle – Nottingham, UK - Dry mixed recyclables / Commercial and industrial waste MRF

    Customer Wastecycle Ltd, based in Nottingham city in the UK is the leading resource management and recycling company in the East Midlands, and is part of the Environmental division of the DCC Group. Wastecycle process waste and material through their Recycling Facilities with over 90% recycled and recovered, whilst successfully locating and securing markets for over 200,000 tonnes of ...

  • Recycling; Segregation of Waste; Use of Recycled Products; Energy Conservation: Flinders Medical Centre

     Background Flinders Medical Centre (FMC) initiated the Healthy Environment Project in December 1991 with the aim of minimising waste and exploring other environmental initiatives. FMC is a public teaching hospital in the southern suburbs of Adelaide, with 500 beds and 3,000 staff. Over the past two decades, hospitals have increasingly sought to minimise the risk of ...


  • Complete supply chain approach is essential for success

    Richard McKinlay, Senior Engineer at resource recovery specialist Axion Consulting suggests the recycling industry and infrastructure needs to move to a complete supply chain approach if it is to thrive and succeed. The recent failures of several well-known plastic recyclers has caused concern and led some to question the future viability of this sector. Although these failures were influenced by ...

  • The rules are changing for garbage in Pennsylvania

    Changes to the municipal and residual solid waste regulations within the State of Pennsylvania have been in the works for a number of years within the DEP’s Bureau of Waste Management. This article provides a summary of the currently understood status of the proposed rules, details of some of the proposed changes and commentary on the success of state recycling programs across the nation. Based ...

  • Recycling at Special Events.Where Crowds Gather, Recyclables are Sure to Follow

     Special events pose a challenge to recyclers because the waste stream often contains large amounts of single-use products and food discards, and multiple vendors often serve participants. While the type of materials generated varies by event size, venue, and theme, quantities can be substantial. For example, the 30,000 patrons at the Davis, California 1999 Whole Earth Festival produced more ...


    By BioCycle Magazine

  • Is it time to rethink recycling?

    If our current approach to recycling isn’t the best for the economy or the environment, why do we do it? Criticize recycling and you may as well be using a fume-spewing chainsaw to chop down ancient redwoods, as far as most environmentalists are concerned. But recent research into the environmental costs and benefits and some tough-to-ignore market realities have even the most ...


    By Ensia

  • Dedisa, Chania, Greece - Case Study

    High-innovative and crucial investment added great value for Chania, Greece. Overview The DEDISA waste management plant is located in the prefecture of Chania, which is a prefecture of the island of Crete, in the south of Greece. This integrated waste-processing centre serves a population of 155 000 inhabitants, which represents around 25% of the island’s total population. ...


    By TOMRA Sorting GmbH.

  • Oil Sampling Best Practices (Part 2)

    Understanding Dynamic Particle Equilibrium in Closed Loop Systems Dynamic Equilibrium Condition (DEC) is defined as a steady state condition where the normal wear rate in a machine results in no net gain or loss of particles. ...


    By Spectro Scientific

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you