hdpe pipe Articles

  • Pioneering Primer from Plastics Pipe Institute

    With administrative offices located in Dallas, Texas, The Plastics Pipe Institute Inc. (PPI) is the major trade association representing all segments of the plastics piping industry. PPI members share a common interest in broadening awareness and creating opportunities that expand market share and extend the use of plastics pipe in all its many applications. As an association, PPI focuses ...


    By TRIC Tools Inc.

  • BOSS 2000 HDPE Storm Sewer Pipe, Stettler, AB

    Owner: Town of Stettler Installer: Woooden Construction Ltd. Designer: Associated Engineering Alberta Ltd. Location: 57 Street, Stettler, Alberta As part of a sanitary main replacement project, the Town of Stettler was faced with the challenge of replacing an aging storm sewer line under very low cover conditions. ...


    By Armtec

  • Share some universal knowledge about HDPE flap valve

    HDPE flap valvespecifications of round and square HDPE flap valve two kinds, according to the size and shape of the outlet design and production; were hollow floats can knock on the door and a plate-plate HDPE flap valve. For pipes, sewage treatment, rivers ...

  • Quantitative pipe condition assessment with Pipe Penetrating Radar

    Abstract Pipe Penetrating Radar (PPR) is the underground in-pipe application of GPR, a non-destructive testing method that can detect defects and cavities within and outside mainline diameter (>18 in / 450mm) non-ferrous (reinforced concrete, vitrified clay, PVC, HDPE, etc.) pipes. The key advantage of PPR is the unique ability to map pipe wall thickness and deterioration including voids ...


    By SewerVUE

  • plastic pipe fitting mold technology

    “ Forever care you, care your molds”, is our insist mentality philosophy. We insist on mold construction design and steel quality, believe these two factors are main points to achieve mold with excellent performance. produces moulds for PVC ...


    By Focare Mould Co.,Ltd.

  • Completing Condition Assessments using In-pipe GPR as Pipe Penetrating Radar

    Abstract This paper describes the development of Pipe Penetrating Radar (PPR), the underground in-pipe application of GPR, a non-destructive testing method that can detect defects and cavities within and outside mainline diameter (>18 in / 450mm) non-metallic (concrete, PVC, HDPE, etc.) underground pipes. The method uses two or more high frequency GPR antennae carried by a robot into ...


    By SewerVUE

  • Combined application of Pipe Penetrating Radar and LIDAR for large diameter pipe inspection

    Abstract: Pipe Penetrating Radar (PPR) is the underground in-pipe application of ground penetrating radar (GPR), a non-destructive testing method that can detect defects and cavities within and outside mainline diameter (>18 in./450mm) non-metallic (reinforced concrete, vitrified clay, PVC, HDPE, etc.) underground pipes. Light Detection and Ranging (LIDAR) has become an accepted method for ...


    By SewerVUE

  • What Are The Benefits of Commercial Pipe Bursting?

    Repairs become more difficult when commercial aspects are involved. Aside from being disruptive for businesses and time consuming, they can also pose some safety and health hazards for the employees and customers. Trenchless technology has introduced a no-dig solution that can turn a potential sewage or drain problem into one that’s relatively seamless and quick. ...


    By TRIC Tools Inc.

  • 5 Considerations for Choosing Pipe Bursting

    Homeowners who encounter sewer, drain, and water line problems often dread repairs not just because of the expense, but the major disruptions that they expect. Excavation, torn up lawns, and days of going without water are associated with traditional methods of repair. Fortunately, technology has made it possible to assess and fix pipes with minimal disruption by using a technique called pipe ...


    By TRIC Tools Inc.

  • Applications of Pipe Penetrating Radar for Advanced Pipe Condition Assessments: the Clark Regional Wastewater District (WA) Case Study

    Abstract Pipe Penetrating Radar (PPR) is the underground in-pipe application of GPR, a non-destructive testing method that can detect defects and cavities within and outside mainline diameter non-metallic (reinforced concrete, vitrified clay, PVC, HDPE, etc.) underground pipes. The key advantage of PPR is the unique ability to map pipe wall thickness and deterioration including voids outside ...


    By SewerVUE

  • Advanced Condition Assessments: The benefits of using Pipe Penetrating Radar

    Abstract: Pipe Penetrating Radar (PPR) is the underground in-pipe application of GPR, a non-destructive testing method that can detect defects and cavities within and outside mainline diameter (>18 in/450 mm) nonmetallic (reinforced concrete, vitrified clay, PVC, HDPE, etc.) underground pipes. The key advantage of PPR is the unique ability to map pipe wall thickness and deterioration including ...


    By SewerVUE

  • Condition Assessments using Pipe Penetrating Radar: the Metro Wastewater Reclamation District - Denver, CO Harvard Gulch Interceptor Case Study

    Abstract Pipe Penetrating Radar (PPR) is the underground in-pipe application of ground penetrating radar (GPR), a non-destructive testing method that can detect defects and cavities within and outside mainline diameter (>18 in / 450mm) non-metallic (reinforced concrete, vitrified clay, PVC, HDPE, etc.) underground pipes. The key advantage of PPR is the unique ability to map pipe wall ...


    By SewerVUE

  • Great Island Tank 4 and bund refurbishment - case study

    Lining works to refurbish the existing tank farm secondary containment bund and HFO Tank 4 are ongoing at Great Island CCGT project. Lining Tech are contracted in to Balfour Beatty Ireland on this design and build project for the client Tank 4 Works Installation of 1,140m2 of 1mm HDPE leak detection liner to the floor of HFO tank 4 Fabrication and installation ...

  • Tonabrocky reservoir roof lining - case study

    Geosythetic lining works include the installation of a 1,825m2 of 1.5mm smooth HDPE liner over the concrete roof of one existing and one new reservoir. Works included Fusion and extrusion welding techniques Sealing of HDPE liner to vertical concrete surface of 6nr. access hatches  using a stainless steel battening system Fabrication and sealing of 16 nr. pipe boots around ...

  • Slurry Lagoon Mountmellick - case study

    Lining Tech have completed lining works to construct a cost efficient 1,000,000 gallon geomembrane lined slurry lagoon in Mountmellick, County Laois. Works included the installation of a 2.5mm smooth HDPE liner in accordance with the Department of agriculture's specification S126 for geomembrane lined slurry lagoon. Works also included the fabrication and sealing of five pipe boot details around ...

  • Squaw Valley Mutual Water Company - Case Study

    Something Old, Something New: New twist on trenchless shows promise for California water company’s ability to avoid costly permitting process Challenge Burst and remove 3,000 feet of galvanized steel transmission line without damaging the new replacement pipe being installed in the same pull. Solution We custom ...


    By TRIC Tools Inc.

  • Asahi/America Application Story – Mining

    A Major Copper Mining Company in the United States was constructing a new Drain Header from the SXEW Plant The drain pipe is typically HDPE with PVC or CPVC Flange X Socket valves depending on operating temperature. This is basically a copper plating application where they plate copper on to stainless steel sheets to a desired thickness an then break off the slabs/plates of copper from the sheets ...


    By Asahi/America, Inc.

  • Honolulu force main microtunneled

    Long a favored product for microtunneled sanitary sewer interceptors nationwide, now installation of Hobas centrifugal cast fiberglass reinforced polymer mortar (CCFRPM) pressure pipes by jacking is also becoming commonplace. A near flawless installation was completed in Honolulu on the Hart Street Wastewater Pump Station Force Main Replacement project. The new line included 2200 feet of ...


    By Hobas Pipe USA

  • JM Eagle weathering the storm

    The United States economy has been in a downward spiral for a number of years, and most business owners are feeling the pinch. Two years ago the JM Eagle plant in Sunnyside was closed down…its future was uncertain. But after months of planning and reconstructing, JM Eagle announced it was installing high density polyethylene pipe (HDPE) production lines at the Sunnyside facility. ...


    By JM Eagle

  • Dewatering Crews Keep the Alameda Corridor Dry and Open for Business

    Griffin installed a multitude of deep wells along the alignment of the proposed railway to allow for construction. The discharge from the wells was pumped via large diameter high density polyethylene pipe (HDPE) to a below grade mixing vault, where a neutralizing agent was introduced to the groundwater as the quality of the groundwater was not allowed to discharge to the designated receiving ...


    By Griffin Dewatering

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you