heat pump system Articles

  • Ground Source Heat Pumps

    In many buildings Ground Source Heat Pumps (GSHPs) provide an efficient solution for heating and cooling. Using low temperature latent heat which exists naturally below ground, GSHPs provide solutions by harvesting and transferring this energy for the benefit of the built environment. It is important to understand the feasibility of GSHP prior to designing a system. This guidance note has been ...


    By WSP | Parsons Brinckerhoff

  • Heat Pumps – FAQs

    1. What is a Heat Pump? To put it simply; ground source heat pumps and geothermal heat pumps produce high grade heat from low grade heat which is found in the earth and our atmosphere.2. How does a Heat Pump Work?Heat pumps work in exactly the same way as air conditioners or refrigerators, but in reverse! Heat pumps capture latent energy which is stored in sources such as air, water and earth. ...


    By ICS Cool Energy Ltd.

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Energy and exergy analysis of an Automobile Heat Pump system

    This study deals with energy and exergy analysis of an Automobile Heat Pump (AHP) system using R134a as the working fluid and ambient air as a heat source. An experimental AHP system consisting of original components from an Automobile Air Conditioning (AAC) system and some extra equipment was developed and instrumented. The system was operated in steady state under various ambient and return air ...


    By Inderscience Publishers

  • Pumps are the heart of heat-transfer plants

    Manufacturers in a variety of industries depend on heat-transfer plants to heat or cool their machines and apparatus. German firm heat11 GmbH & Co. KG specializes in heat-transfer plants of virtually all types. The chemical industry uses their installations for controlling the temperature of reactors and during the production of color pigments and liquid crystals. In the plastics industry, ...


    By ALLWEILER GmbH

  • Pumps for synthetic heat-transfer liquids

    As soon as the temperature in a heat-transfer system becomes too high for water, a plant operator must choose between petroleum-based or synthetic oils as the heat-transfer liquid. When modern petroleum oils are used, systems with feed temperatures up to about 300 °C can stay in service for their entire service life with one filling and with virtually no maintenance. Once feed temperatures ...


    By ALLWEILER GmbH

  • Utilisation of air-groundwater exergy potential for improvement of the performance of heat pump systems

    This paper reports a study on the use of the non-flow air-groundwater exergy potential for improving heat pump performance. It is shown that for air/groundwater temperature differences of order 15°C, energy savings up to 50% may be expected for heat pumps operating either in the heating mode or in the cooling mode. It is also shown that the reduction in the energy required to drive the heat pump ...


    By Inderscience Publishers

  • Ground Source Heat Pump installed in eco house

    This case study looks at a ground source heat pump being installed in London. A Ground Source Heat Pump was chosen as a sustainable and energy efficient way to provide 100% space heating and hot water for this 550m2 new build eco-house in East London. A Heat Recovery Mechanical Ventilation System was also utilised, which, together with Solar Thermal hot water and LED lighting give this stunning ...


    By Ground Sun

  • Geothermal Heat Pump (GHP) - Case Studies

    Case Study: “GHP schools used approximately 26% less source energy per square foot of floor area,” according to an evaluation of Lincoln, Nebraska schools by the Department of Energy. The report concludes that the schools using GHP technology “outperform others in the school district.” Case Study: Annual electrical consumption in Fort Polk ...

  • Energy and exergy analysis of a solar–assisted heat pump space heating system for clear days

    The studies over solar–assisted heat pump systems have been performed mostly on time periods when solar radiation is high. Therefore, this study focuses on performance analysis of a solar–assisted heat pump system which stores the energy during the clear day and uses it as a heat source of heat pump space heating system during the night. Energy and exergy analyses divided into two parts, which ...


    By Inderscience Publishers

  • Diffusion of innovative heating systems in detached homes in Sweden

    The Swedish homeowners' perception of Innovative Heating Systems (IHSs) was studied through a questionnaire survey. Most of the respondents were satisfied with their existing heating systems and were not planning to install a new one. They considered economic factors and functional reliability the most important factors in the choice of a heating system. Hence, economic policy instruments appear ...


    By Inderscience Publishers

  • Technical and economic analysis of gas-engine driven heat pump in China

    In this paper, the primary energy ratio and economic benefit of five different heating systems are analysed. The results show that the gas-engine heat pump system has the advantages of high primary energy efficiency and favours environmental protection in contrast to the other four heating systems. At the same time, to improve the economic benefit of the energy saving and environmental protection ...


    By Inderscience Publishers

  • Exergetic and sustainability performance assessment of geothermal (ground source) ejector heat pumps

    Although ejectors have been used in cooling/refrigeration and Heat Pumps (HP) applications for a long time, utilisation of Geothermal Ejector Heat Pump (GEHP) with Ground–Heat Exchanger (GHE) is a new idea, which has recently appeared in the literature. In this study, we model a GEHP system with a GHE in terms of exergetic aspects and apply our model to this system in the heating mode. The system ...


    By Inderscience Publishers

  • Steady versus dynamic exergy analysis: the case of an air source heat pump

    Exergy analysis is often performed statically, for given system conditions and reference state. Dynamic exergy analyses, considering the variation of system operation and ambient conditions, would obviously be more time consuming. Therefore comparing the results of the two approaches helps understand when the dynamic methodology should be preferred. In this paper the yearly behaviour of a ...


    By Inderscience Publishers

  • Heat Pump Used to Drain Contaminated Sludge in a Steel Factory

    Summary In 1987, new regulations required that factories dispose of their contaminated water and waste themselves. Making galvanised steel wire, the Stelfil factory produces sludge contaminated with lead and zinc. Stelfil spent thousands of dollars to bury this waste and evaluated three systems to remove most of the water: a gas dryer, an induction heated screw conveyor and a heat pump system. ...


  • Thermodynamic analysis and assessment of space heating with ground–source heat pump for sustainable future

    In this paper, the thermodynamic modelling of exergy loss, exergy efficiency, exergy destruction rate, environmental destruction coefficient, improvement potential, exergy destruction factor, relative irreversibility, productivity lack and exergetic factor of ground source heat pump (GSHP) system are investigated. The results show that these exergy indexes should be used integratively. Compressor ...


    By Inderscience Publishers

  • Harrogate Borough Council - Ground Source Heat Pump case study

    Customer: Harrogate Borough Council Location: Copt Ewich Heating System: Ground Source Heat Pump Harrogate Borough Council installed 94 heat pumps in 2006 as a test project in a number of sites in Harrogate. Eight of these were fitted in a scheme at Copt Ewick. On one of these systems two Vortexs’ were fitted one on the ground loop and one ...


    By Vortex Energy Saver

  • Assessment of exergy efficiency and Sustainability Index of an air?water heat pump

    This study is undertaken to predict the second law performance of an air/water heat pump. Through energy and exergy analyses, analytical expressions are derived for the Coefficient of Performance (COP) and Exergy Efficiency (ηexe). The system is analysed to predict how the mass flow rate of R-134a, condensation and evaporation temperatures influence the system performance at various operating ...


    By Inderscience Publishers

  • Exergy analysis of a vapour-compression refrigeration/heat pump cycle with chimney

    The greatest speciality of this work is using chimneys with different heights above the condenser instead of a condenser's fan on the vapour-compression refrigeration/heat pump system chosen as an experimental set. Exergy analyses of natural convection with and without chimneys and forced convection on the same experimental set have been made with acceptances of steady state-steady flow system on ...


    By Inderscience Publishers

  • 24kW Ground Source Heat Pump In Essex - Case Study

    The space heating and hot water for this property was previously done by an oil boiler. The client was considering a ground source heat pump in order to lower running costs and benefit from tariff payments under the Renewable Heat Incentive (RHI). Better Planet carried out a room by room heat loss calculation. This is required in order to size the heat pump ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you