heat pump technology Articles

  • 100 Simple Ways To Save Water

    To improve water conservation install a rain sensor, it turns off your irrigation when it rains. Use a weather-based controller. The use of smart controllers can reduce water usage 24% a year on average. Learn about available rebate programs ...


    By Jain Irrigation, Inc

  • Heat Pumps – FAQs

    1. What is a Heat Pump? To put it simply; ground source heat pumps and geothermal heat pumps produce high grade heat from low grade heat which is found in the earth and our atmosphere.2. How does a Heat Pump Work?Heat pumps work in exactly the same way as air conditioners or refrigerators, but in reverse! Heat pumps capture latent energy which is stored in sources such as air, water and earth. ...


    By ICS Cool Energy Ltd.

  • Geothermal Heat Pump (GHP) - Case Studies

    Case Study: “GHP schools used approximately 26% less source energy per square foot of floor area,” according to an evaluation of Lincoln, Nebraska schools by the Department of Energy. The report concludes that the schools using GHP technology “outperform others in the school district.” Case Study: Annual electrical consumption in Fort Polk ...

  • Storing Heat Underground

    Underground thermal energy storage (UTES) is a system that uses inter-seasonal heat storage, storing excess heat from the summer for use in winter heating, and the cooling potential from winter for cooling in summer. A cost-effective, low-energy and low-risk proven renewable technology, UTES reduces carbon emissions by up to 60% and is becoming an increasingly popular choice for residential, ...


    By Boode Waterwell Systems

  • Heat recovery from wastewater

    Heat recovery from gray water is particularly important in water-intensive industries such as pulp and paper plants, dairies and breweries. Rather than flushing used water down the drain, consider whether a heat exchanging system can help you put that energy to work in your process again. Most plant operators arc aware of the need to save money and reduce the environmental impact of their plant ...


    By DDI Heat Exchangers Inc.

  • Modelling of groundwater flow and heat transport

    Client: Transport for London Location: London Services: Groundwater Modelling Issues: Identifying the potential effects of pumping excess heat to the Chalk aquifer Summary: ESI was commissioned to test the feasibility of one of the possible solutions identified to prevent temperatures on the ...

  • Combined Heat and Power – Questions and Answers

     1. What are the benefits of CHP for business?   combined heat and power (CHP) is a well-proven technology, recognised worldwide as a cleaner alternative to traditional centralised generation. Its long-term future in the global energy markets is secured by CHP's ability to provide a multitude of financial, ...


    By ENER-G

  • Case study - Veolia MPPE Technology - LMBV Schwarze Pumpe - DE

    Groundwater remediation Former brown coal conversion site Five MPPE units Operational since 2002 Challenge 2 years of intensive testing Reinfiltration of purified water Ideal to enhance insitu biodegradation Enhanced DNAPL & LNAPL removal with surfactant ...

  • Pump it up

    Aligning itself with a major equipment supplier and dealer helps the company access the tools and expertise it needs without risking too much capital. Aquatech is the distributor for Godwin Pumps of America in Ontario, Nunavut, Newfoundland and Eastern Labrador, all resource-rich territories. A recent purchase of Godwin by ITT Corporation has expanded the lineup of mine sector pumps. The company ...


    By Aquatech Dewatering Company

  • First industrial application of an open absorption cycle for heat transformation in a district-heating network

    The first plant for high temperature utilisation of higher heating value was realised under industrial conditions in a combined heat and power plant. The technology results in an increased heat recovery temperature and a stronger dehumidification of the flue gas. Beyond that, the use of large solution flow within an adiabatic absorber enables to combine gas scrubbing and dehumidifying. Economic ...


    By Inderscience Publishers

  • Opening markets for CSP – the industrial heat application

    Heavy industry can be a viable secondary market today for CSP producers, but questions remain on whether start-up costs are justifiable for industrial users, and how reliable CSP can be for processes that can't pace production by the sun. Solar thermal heat implies steam, and industries that need steam include refining, food processing, wood-working, desalination and chemicals, among others. ...


    By FCBI Energy

  • Improving and maintaining the performance of your Heat Exchanger or Condenser.

    The usage of Heat Exchangers or Condensers is common in many processes across a wide range of industries. The Energy sector is no different, either in the Thermal Power Generation, Upstream and Downstream of the Oil and Gas including Petrochemical and Chemical plants; Heat Exchangers are used to cool of the steam or to pre-heat different liquid needed in the processes. The recurrent problem of ...

  • Geothermal Energy Technologies

    Technology Overview   Nowhere is the raw power of geothermal resources more evident than at the Old Faithful geyser at Yellowstone National Park. (Joel Renner)  Geothermal energy is natural heat from the Earth's interior where temperatures reach greater than 7000°F. The heat is brought to the surface as steam or hot water—created when water flows through heated, permeable ...


  • Electronic water treatment reduces fouling in heat exchangers

    The deposition of material on heat transfer surfaces is called fouling which significantly impacts on the thermal and mechanical performance of heat exchangers. Fouling increases the overall thermal resistance and lowers the overall heat transfer coefficient of heat exchangers as well as impeding fluid flow, accelerating corrosion and increasing pressure drop across the heat ...

  • Introduction to pinch technology

    This material aims to give an overview of the fundaments of Pinch Technology. You will learn: • How to obtain energy targets by the construction of composite curves.• The three rules of the pinch principle by which energy efficient heat exchanger network designs must abide.• About capital-energy trade off for new and retrofit designs.• The best way to make energy saving process ...

  • What Are Solar Buildings Technologies?

    Solar buildings technologies use the non-polluting power of the sun to help heat, cool, and power our buildings. Because buildings now use one-third of the energy currently consumed in this country, the potential markets for using solar buildings technologies in place of conventional ones is substantial. Whether you're a home owner, architect, builder, business owner, or industry or utility ...

  • Introduction to Pinch Technology

    This document aims to give an overview of the fundaments of Pinch Technology. The reader will learn: How to obtain energy targets by the construction of composite curves. The three rules of the pinch principle by which energy efficient heat exchanger network designs must abide. About the capital-energy trade off for new and retrofit designs. Of the best way to make energy ...

  • Quebec recovers heat energy from sewage in Baied`Urfe

    Energy recovery from municipal sewage and greywater offers cities a new reliable resource.  Erwin Schwartz of DDI Heat Exchangers Inc. reports on a novel application of rectangular, wide-gap heat exchangers that has worldwide potential. The Canadian company DDI Heat Exchangers Inc. installed, with the support of the Quebec provincial government and municipal sewage authority, the first ...


    By DDI Heat Exchangers Inc.

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Impact of heating method on the flocculation process using thermosensitive polymer

     Flocculation process based on water soluble polymers as flocculating agents is still intensively researched nowadays, despite the introduction of these materials about fifty years ago. There is a need to gain the full control of this process in order to obtain high efficiency and strictly define products. For that purpose new solutions are proposed like stimuli-responsive macromolecules. In ...


    By IWA Publishing

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you