heat recovery Articles

  • Heat recovery

    A heat recuperator absorbs an important part of the calorific energy from gases generated in the combustion of a solid, liquid or gaseous fuel in the process of: melting, heating, toasting, drying, etc. of an specific product. The calorific energy absorbed is transmitted to another fluid, mostly combustion air for the process and fuel saving is so important that the recuperator is amortized in ...


    By Kalfrisa, S.A.

  • Heat recovery from wastewater

    Heat recovery from gray water is particularly important in water-intensive industries such as pulp and paper plants, dairies and breweries. Rather than flushing used water down the drain, consider whether a heat exchanging system can help you put that energy to work in your process again. Most plant operators arc aware of the need to save money and reduce the environmental impact of their plant ...


    By DDI Heat Exchangers Inc.

  • Heat recovery system at a flooring manufacturer

    Flooring Manufacturer Reduces Operating Costs with a Customized Heat Recovery System Rising energy costs effect your bottom line. You don’t have to be a CFO to understand that energy costs are high and show little sign of relief these days. To combat the rising cost of natural gas, many companies that operate air pollution control systems are beginning to look at methods that economically ...

  • In Situ electromagnetic heating for hydrocarbon recovery and environmental remediation

    Introduction Thermal recovery methods, as applied in heavy oil and oil sand deposits, and in environmental remediation, have the common objective of accelerating the hydrocarbon recovery process. Raising the temperature of the host formation reduces the oil and bitumen viscosity, and, in environmental remediation, increases vapour pressure. These effects assist in sweeping the substances ...


    By McMillan-McGee Corp.

  • MLM® vs. Conventional RTO Heat Recovery Media

    Random media, in addition to high pressure drop, are also associated with common operational problems when used as the heat recovery media in RTO units. These problems include settling and nesting which leads to even higher pressure drop ...


    By Lantec Products, Inc.

  • Get 46% FREE Energy with Waste Heat Recovery

    Kaojai Green can show you how a simple waste heat recovery system can produce up to 46% of usable heat energy and energy performance benefit! Read on to see how… First let’s get a little technical and look at how we “can” do this… In waste heat recovery systems the “Art of Energy Recovery” or ...


    By Kaojai Green Energy

  • Heat Recovery for Reuse in Proofing Ovens: Buttercup Bakeries

     By collaborating with a major tertiary research institution, RMIT University, Buttercup Bakeries has been able to apply new heat recovery technology suitable for bakery and other industrial applications. The initiative has resulted not only in cost and energy savings but more efficient oven heating boiler operations. Background Buttercup Bakeries is part of the ...


  • Modelling the viability of heat recovery from combined sewers

    Modelling of wastewater temperatures along a sewer pipe using energy balance equations and assuming steady-state conditions was achieved. Modelling error was calculated, by comparing the predicted temperature drop to measured ones in three combined sewers, and was found to have an overall root mean squared error of 0.37 K. Downstream measured wastewater temperature was plotted against modelled ...


    By IWA Publishing

  • Case study - Increasing primary heat recovery

    OVERVIEW Tekra Corporation is a custom coater of plastic films in Wisconsin, where state regulations require over 98% of the Volatile Organic Compounds (VOCs) emitted from their process be destroyed in an oxidizer system. While considering their first oxidizer system, Tekra's Engineers did their homework and invested in an early model Regenerative Thermal Oxidizer (RTO). While at the ...

  • Thermo–economic analysis of heat pipe heat exchanger for waste heat recovery in thermal systems

    Thermo–economic analysis of Heat Pipe Heat Exchanger (HPHE) for waste heat recovery in thermal systems using the P1–P2 and NTU methods is presented. The optimum effectiveness of a HPHE is given as a polynomial equation, whereas the net savings and payback period are given in closed form to enable the HPHE designer to determine the optimised values directly. In addition to this, exergy analysis of ...


    By Inderscience Publishers

  • Power Substation and a Gas-Fired Combustion Turbine and Heat Recovery Steam Generator

    B&V Energy expands the world's largest nitrogen plant by constructing a cogeneration plant supplying the additional power needed to reach resources deep in Mexico's offshore oil field. Metropolitan Mexico City has a population of approximately 20 million and is one of the most densely populated areas in the world, requiring an extraordinary amount of gas and oil to satisfy its growing energy ...


    By Black & Veatch Corporation

  • Experimental study of a novel thermoelectric domestic-ventilator with heat recovery

    A novel prototype thermoelectric domestic-ventilator with air-conditioning heat recovery of exhaust had been made and tested in this paper. A thermoelectric heat exchanger is integrated with a flat-fin cross-flow heat exchanger in this ventilator. This ventilator is investigated and its cooling (or heating) performance evaluated in terms of the Coefficient of Performance (COP), cooling and ...


    By Inderscience Publishers

  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Maximum possible efficiency for energy recovery from low-grade heat sources

    Gas-to-gas heat exchangers are increasingly being used to recover low-grade heat (or cooling) to reduce energy requirements for space heating, drying and other applications. The efficiency of heat recovery is often limited by practical considerations which could – in principle – be reduced or eliminated by development of new materials and technology. However, this paper posits a fundamental ...


    By Inderscience Publishers

  • LATEST TECHNOLOGY: Low NOx PAINT BOOTH & INDUSTRIAL OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • Case study - ABUTEC’s heat recovery unit provides multiple landfill benefits

    ABUTEC Heat Recovery Flare A Pennsylvania-based waste management site needed a solution to burn off harmful gases emitted from decaying waste in their landfill. They also wanted a way to make the most out of the waste that was being burned, so they looked to ABUTEC representatives to devise a plan for combustion. ABUTEC representatives suggested the Heat Recovery Unit to burn off the waste heat ...


    By ABUTEC LLC

  • LATEST TECHNOLOGY: Small PAINT BOOTH OXIDIZERS with Heat Recovery

    SOIL-THERM’s patented Jet-THERM direct fire Thermal and Catalytic Oxidizer technology provides many benefits to our customers not found anywhere else:  (1) Lower NOx emissions, (2) Very energy efficient and lower fuel usage with or without H.E. Recuperator,  (3) VERY SMALL FOOTPRINT - -  usually 1/4th the size of others, and (4) SIMPLE and EASY operating and monitoring ...


    By Soil-Therm Equipment, Inc.

  • VaporRemed helped in recovery of pets

    We recently converted our oil boiler to gas and the heating crew could not remove the half-full, 250-gallon oil tank until one week later. Hence, we had an open fuel oil tank (the pipes were removed) and strong oil fumes inside our home. As a result, our dog and cat became ill within a few hours. Upon receiving and spraying the VaporRemed, the fumes quickly disappeared and the animals recovered. ...


    By Sarva Bio Remed, LLC

  • Power Positive Resource Recovery

    Using laws of thermodynamic analysis to evaluate the energy and power characteristics of wastewater and beneficial uses of biogas offers greater insight into best business practices and what is achievable. Growing numbers of waste-water treatment plants (WWTP) are striving to produce more power onsite. In recent years, there’s even been a race among WWTP operators to see who can ...


    By BioCycle Magazine

  • A study on the thermodynamic analysis of a cascaded latent heat storage system over the single storage tank system for diesel engine waste heat recovery

    This article presents the comparison of performance of a cascaded Latent Heat Storage (LHS) system over the Single Storage Tank (SST) system for heat recovery from a diesel engine. The energy and exergy saved and efficiencies during the charging process are evaluated and reported using actual system data. The discharge process is analysed with a case study and it is concluded that it is possible ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you