heat recovery boiler Articles

  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • Heat Recovery for Reuse in Proofing Ovens: Buttercup Bakeries

     By collaborating with a major tertiary research institution, RMIT University, Buttercup Bakeries has been able to apply new heat recovery technology suitable for bakery and other industrial applications. The initiative has resulted not only in cost and energy savings but more efficient oven heating boiler operations. Background Buttercup Bakeries is part of the ...


  • CDQ waste heat boiler for iron and steel industry manufacturer

    Energy use is additionally a major supply of emissions from the iron and steel industry, making energy efficiency improvements a lovely chance to reduce both emissions of pollutants and greenhouse gases. The global steel industry has recently taken the lead on developing future low-carbon iron and steelmaking technologies. Waste heat boiler ...


  • Heat recovery and energy efficiency, improves profitability and reduces CO footprint

    Using latest technology in combustion of oil and gas can provide significant savings in overall energy consumption. Modern oxygen control that compensates changes in ambient temperature and fuel qualities can increase energy efficiency up to 3%. By adding the usage of hot combustion air another 2-3% can be saved. Modern burner technology without mechanical linkage, operating with accurate ...


    By Oilon Oy

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Checklist for Boiler Maintenance

    Boilers play a crucial role at industrial facilities and it is imperative that they be safely and properly maintained. Routine boiler maintenance can help prevent unplanned shutdowns and outages, increase the efficiency of the boiler and cut operating costs, and ensure that the facility is in full compliance with all laws and regulations governing boiler safety. What follows is a boiler ...


    By STI Group, Inc.

  • EPA finalizes boiler NESHAP

    EPA published the final National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions. EPA developed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater than 25 tpy of ...


    By Trinity Consultants

  • VaporRemed helped in recovery of pets

    We recently converted our oil boiler to gas and the heating crew could not remove the half-full, 250-gallon oil tank until one week later. Hence, we had an open fuel oil tank (the pipes were removed) and strong oil fumes inside our home. As a result, our dog and cat became ill within a few hours. Upon receiving and spraying the VaporRemed, the fumes quickly disappeared and the animals recovered. ...


    By Sarva Bio Remed, LLC

  • Power Positive Resource Recovery

    Using laws of thermodynamic analysis to evaluate the energy and power characteristics of wastewater and beneficial uses of biogas offers greater insight into best business practices and what is achievable. Growing numbers of waste-water treatment plants (WWTP) are striving to produce more power onsite. In recent years, there’s even been a race among WWTP operators to see who can ...


    By BioCycle Magazine

  • Frequency Converter energy savings on Boilers

    Boilers and heaters account for a significant share of a plant's purchased fuel cost. Combustion air fans are necessary to provide enough combustion air to the boiler or heater's burner system. Louvers, inlet guide vanes or frequency converters control the amount of air allowed into a boiler. Configuring a combustion air fan to allow the proper amount of air into the burner can improve boiler ...


  • Nottingham - Condensing Combi-Boiler case study

    Customer: Mr Tony Goodyear, Heating Engineer Location: Nottingham Heating System: Gas Condensing Combi Boiler installed: 08/07 Problems: New condensing boiler fitted within the past 12 months had failed to rectify noise from pump and problems with air present in ...


    By Vortex Energy Saver

  • Pakistan SZS Gas Fired Steam Boiler

    Heavy Oil, Light Oil, Residual Oil, Natural Gas, City Gas, and Blast Furnace Gas can be used as Fuel. The boilers can also be applied to generate electricity at some districts where electricity power is in short. So are a variety of industrial productions, living and remote areas, and oil field. Even they can be used as a power plant boiler startup. SZS series oil & gas boilers are ...


  • Proposed boiler MACT sets aggressive emission limits

    On June 4, 2010, U.S. EPA proposed National Emission Standards for Hazardous Air Pollutants (NESHAP) for industrial, commercial, and institutional boilers and process heaters at both major and area sources of hazardous air pollutants (HAP) emissions.  EPA proposed separate rules for units at major sources of HAP emissions (greater than 10 tons per year [tpy] of any single HAP and/or greater ...


    By Trinity Consultants

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • Pumps are the heart of heat-transfer plants

    Manufacturers in a variety of industries depend on heat-transfer plants to heat or cool their machines and apparatus. German firm heat11 GmbH & Co. KG specializes in heat-transfer plants of virtually all types. The chemical industry uses their installations for controlling the temperature of reactors and during the production of color pigments and liquid crystals. In the plastics industry, ...


    By ALLWEILER GmbH

  • Case study - Waste heat generates steam and savings

    OVERVIEW A coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost.  The facility was looking for additional ways to decrease their exhaust ...

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • First industrial application of an open absorption cycle for heat transformation in a district-heating network

    The first plant for high temperature utilisation of higher heating value was realised under industrial conditions in a combined heat and power plant. The technology results in an increased heat recovery temperature and a stronger dehumidification of the flue gas. Beyond that, the use of large solution flow within an adiabatic absorber enables to combine gas scrubbing and dehumidifying. Economic ...


    By Inderscience Publishers

  • Chemical recovery - Recycle Fluid Technologies, Inc. - case study

    Application Recycle Fluid Technologies, Inc., of Richland Michigan recovers ethylene glycol of higher purity and greater volumetric yield. The recovered product must meet stringent General Motors and ASTM Standards. Waste Description The used ethylene glycol contains inhibitor salts, ash, dissolved metals, organic acids, motor oils and other variable ...


  • Assessing Feasibility of Direct Drive Technology for Energy Recovery from Digester Biogas

    ABSTRACTThe Regional Municipality of Waterloo completed a study, with support from Environment Canada, to evaluate the feasibility of using direct drive technology to recover energy from digester biogas. The study identified that a 150 HP engine, operating at 54 % load, could be supported by the estimated gas production of 1560 m3/d with 63 % methane by volume. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you