heat recovery media Articles

  • MLM® vs. Conventional RTO Heat Recovery Media

    Random media, in addition to high pressure drop, are also associated with common operational problems when used as the heat recovery media in RTO units. These problems include settling and nesting which leads to even higher pressure drop ...


    By Lantec Products, Inc.

  • Autothermal RTO Retrofit with Structured MLM® Heat Recovery Media Yields $100,000+ Savings Per Year

    MLM® and Rest-O-Cat® Succeed Where Random Heat Recovery Media Failed A suburban Chicago producer of coal tar distillates and specialty chemicals uses a regenerative thermal oxidizer (RTO) to ...


    By Lantec Products, Inc.

  • Case study - Increasing primary heat recovery

    OVERVIEW Tekra Corporation is a custom coater of plastic films in Wisconsin, where state regulations require over 98% of the Volatile Organic Compounds (VOCs) emitted from their process be destroyed in an oxidizer system. While considering their first oxidizer system, Tekra's Engineers did their homework and invested in an early model Regenerative Thermal Oxidizer (RTO). While at the ...

  • Case study - Maximizing heat recovery from your oxidizer and reducing operating costs

    More and more, companies operating air pollution control equipment today realize that the initial capital cost of an oxidizer system can be rapidly eclipsed by continued operating expenses if careful attention is not periodically given to the system. Below are ten tips to ensure your oxidizer is operating at peak performance. The first five tips focus on parameters end-users should know about ...

  • Evaluation of Tire Derived Rubber Particles for Biofiltration Media

    ABSTRACTCurrently, on average, one tire is discarded in the U.S. for every man woman and child every year. While the reuse market for used tires has increased over the years to approximately 75%, there are still an estimated 2-3 billion used tires stockpiled in the U.S. Finding economical and sustainable end uses for this tire material is an ongoing challenge to environmental engineers and ...

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Power Industry using Micro-Media Filtration and short-bed ion exchange

    With the demand or higher efficiencies, lower maintenance and operating costs for boilwers and turbines, high-purity water treatment systems are becoming more crucial to the operation of power plants. Modern power plants, operating at supercritical and ultra upercritical boiler pressures and temperatures, require high-purity water that approaches quality levels at the theoretical levels. ...


    By Eco-Tec Inc.

  • Case study -New media makes RTO natural gas usage a rarity!

    Overview Tekra Corporation has always had an eye on their energy conservation. They are a custom coater of plastic films in Wisconsin where state regulations require over 98% of the Volatile Organic Compounds (VOCs) emitted from their process be destroyed in an oxidizer system. While considering their first oxidizer system, Tekra's Engineers did their homework and invested in an early ...

  • Metal Coating Emission Control

    The use of regenerative thermal oxidizers is expanding into applications where they wouldn’t have been considered years ago, says Mike Scholz As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking ...

  • Case study - Flexographic printer: efficient emissions

    Problem Control of air emissions has become an important issue that flexible packaging converters must consider when changing or upgrading equipment. Robbie Manufacturing of Lenexa, KS, a producer of printed shrink films, bags and pouches for a diverse range of applications, addressed its emissions in 1991 and 1996 by investing in two catalytic oxidizers to control the EPA-regulated air ...

  • On-Vehicle Exhaust Gas Cooling in a Diesel

    ABSTRACT A diesel emissions control system built and tested on an industrial forklift truck is described. The system utilizes a pleated media type diesel soot filter. The temperature limit of the filter material is well below the temperature of the exhaust gas. Therefore, cooling of the exhaust gas is ...


    By DCL International Inc.

  • Case study - RTO: Efficient emission - Working with your pollution control equipment supplier can lead to reductions in both emissions and operating cost

    Untitled Document Robbie Manufacturing of Lenexa , KS is a leader in the production of printed shrink films, bags and pouches for a diverse range of demanding applications. In 2004 alone, the company was awarded a Good Buy award from Good Housekeeping magazine, achieved rigorous American Institute of Baking (AIB) certification and the highest award ( Best-in-Show for Wide Web ) possible from the ...

  • Put energy into emission control projects

    Many companies feel pressured to spend the least amount possible to meet environmental regulations, primarily because compliance isn’t a profit generating endeavor. What some environmental and compliance managers fail to realize is that emission control equipment can quickly become a profit decreasing endeavor with this penny wise-pound foolish approach. With mandatory greenhouse gas (GHG) ...

  • Case study - RTO handles high VOC loading at silgan containers

    OVERVIEW Regeneration Game - Originally printed in The Canmaker Magazine - Sayers Publishing Group As the first generation of oxidizer systems in the industry nears the end of their service life, many canmaking plants face repair or replacement of their existing air pollution control systems. Like many others in the industry, a Silgan canmaking plant in the ...

  • Case study - Oil and gas production

    Problem The largest U.S.-based independent oil and gas producer and one of the largest independent processors of natural gas and natural gas liquids in North America was in search of new technologies to maintain the pollution control efficiency at their natural gas treatment facility. In typical gas plants, the well head natural gas needs to be treated to remove water, CO2, any ...

  • Case study - Natural gas production

    OVERVIEW The largest U.S.-based independent oil and gas producer and one of the largest independent processors of natural gas and natural gas liquids in North America was in search of new technologies to maintain the pollution control efficiency at their natural gas treatment facility. In typical gas plants, the well head natural gas needs to be treated to remove water, CO2, ...

  • The Importance of high-quality service for regenerative thermal oxidizer

    The Importance of high-quality service for Regenerative Thermal Oxidizer. Safety, efficiency and compliance among pressures facing Regenerative Thermal Oxidizer operators. As any plant or maintenance manager working in a manufacturing environment using volatile organic compounds (VOCs) could tell you, the standards for support of all equipment along the process is critical for safety and ...

  • Choosing the right oil skimmer for economical fluid management

    Oil skimmers are simple, dependable and effective tools for removing oil, grease and other hydrocarbuns from water. Although designs var’, ah oil skimmers rely on the fluid properties of specific gravity and surface tension. Most use a moving medium tu remove floating oil from the fluid’s surface, as shown jo Figure 1 (The exception is a floating suction skimmer.) Floating oil and grease cling tu ...


    By Abanaki Corporation

  • Case study - Printing: RTO solution

    Overview A flexographic converter needed to expand its business by adding an 8-color CI printing press to its existing press lines, and planned to add a second press later. The increase in emissions and flow from the new press was beyond the capacity of the existing 10-year old catalytic oxidizer. The customer needed a way to maintain compliance at an affordable cost. ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you