heat recovery steam Articles

  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • Power Substation and a Gas-Fired Combustion Turbine and Heat Recovery Steam Generator

    B&V Energy expands the world's largest nitrogen plant by constructing a cogeneration plant supplying the additional power needed to reach resources deep in Mexico's offshore oil field. Metropolitan Mexico City has a population of approximately 20 million and is one of the most densely populated areas in the world, requiring an extraordinary amount of gas and oil to satisfy its growing energy ...


    By Black & Veatch Corporation

  • Case study - Waste heat generates steam and savings

    OVERVIEW A coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost.  The facility was looking for additional ways to decrease their exhaust ...

  • Heat Recovery for Reuse in Proofing Ovens: Buttercup Bakeries

     By collaborating with a major tertiary research institution, RMIT University, Buttercup Bakeries has been able to apply new heat recovery technology suitable for bakery and other industrial applications. The initiative has resulted not only in cost and energy savings but more efficient oven heating boiler operations. Background Buttercup Bakeries is part of the ...


  • In Situ electromagnetic heating for hydrocarbon recovery and environmental remediation

    Introduction Thermal recovery methods, as applied in heavy oil and oil sand deposits, and in environmental remediation, have the common objective of accelerating the hydrocarbon recovery process. Raising the temperature of the host formation reduces the oil and bitumen viscosity, and, in environmental remediation, increases vapour pressure. These effects assist in sweeping the substances ...


    By McMillan-McGee Corp.

  • Full steam ahead

    RemedX managing director Richard Croft explains why thermal remediation techniques are good value even at a time of recession. In-situ thermal treatments of soils are usually applied in conjunction with other technologies. The process involves heating contaminated soils, rock and groundwater to exploit resulting physical and chemical effects on the contaminants present. To understand the ...


    By Newzeye Ltd

  • Wasting energy through steam loss

    The European Union Directive on the Energy Performance of Buildings, which relates to all member nations of the European Union, are obliged to set limits on greenhouse gas emissions, particularly from buildings. Typically steam is used for a wide range of applications within larger establishments including, humidification, hot water, space heating and air heating.  Primary energy losses in ...

  • Efficient steam production in paper mills

    The paper and pulp industry is an energy and emission intensive industry. Steam is an essential part of the paper making process with steam boilers, steam distribution systems and other processes accounting for a large percentage of a paper mill’s energy costs. Useful energy is often lost from boilers and process equipment such as heat exchangers, dryers, evaporators etc, as well as from ...

  • Power Positive Resource Recovery

    Using laws of thermodynamic analysis to evaluate the energy and power characteristics of wastewater and beneficial uses of biogas offers greater insight into best business practices and what is achievable. Growing numbers of waste-water treatment plants (WWTP) are striving to produce more power onsite. In recent years, there’s even been a race among WWTP operators to see who can ...


    By BioCycle Magazine

  • Study of available exhaust gas heat recovery technologies for HD diesel engine applications

    Diesel engines reject a considerable amount of energy to the ambience through the exhaust gas. Significant reduction of engine brake-specific fuel consumption (bsfc) could be attained by recovering a significant part of exhaust gas heat. Various techniques have been proposed in the past to recover exhaust energy: mechanical, electrical turbocompounding and Rankine Bottoming Cycles. In the present ...


    By Inderscience Publishers

  • Pakistan SZS Gas Fired Steam Boiler

    Heavy Oil, Light Oil, Residual Oil, Natural Gas, City Gas, and Blast Furnace Gas can be used as Fuel. The boilers can also be applied to generate electricity at some districts where electricity power is in short. So are a variety of industrial productions, living and remote areas, and oil field. Even they can be used as a power plant boiler startup. SZS series oil & gas boilers are ...


  • Case study - Maximizing heat recovery from your oxidizer and reducing operating costs

    More and more, companies operating air pollution control equipment today realize that the initial capital cost of an oxidizer system can be rapidly eclipsed by continued operating expenses if careful attention is not periodically given to the system. Below are ten tips to ensure your oxidizer is operating at peak performance. The first five tips focus on parameters end-users should know about ...

  • Carpet Steam Cleaners for Professional Carpet Cleaning

    If you own a contract cleaning or car wash business, you cannot afford to compromise on the quality of the equipment you purchase. Carpet steam cleaners are the primary requirement for any professional cleaning company. Good quality carpet steam cleaners are low-maintenance, high-output machines that offer quality service. Modern carpet steam cleaners have eliminated many of the problems ...


    By Daimer Industries Inc.

  • Elantas enjoys significant steam savings with GEM

    Thermal Energy International Inc. is pleased to announce that ELANTAS Deatech S.r.l, a member of the global specialty chemical group Altana AG, and a leading producer of insulating materials for the electrical and electronics industry, has revealed that it is achieving significant savings in steam consumption at its site in Ascoli Piceno, Italy following the installation of Thermal Energy ...

  • Combined Heat and Power (CHP) essentials

    'CHP essentials' introduces the concept of power and heat 'production possibility sets', starting at the cradle of CHP, i.e., the thermal power generation plant. The latter always occasions 'fatal' heat that is either recovered (the 'merit' of CHP) or wasted (condensing). This split paves the way to defining the production possibility sets of CHP plants, shown for steam turbines, internal ...


    By Inderscience Publishers

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • Comparative study of steam injection effects on operation of gas turbine cycles

    In the present work, gas turbine cycles are modified with steam injection between the combustion chamber exit and the gas turbine inlet. Heat recovery steam generators, utilising the exhaust gases, provide these cycles with the injected steam at saturated vapour. The irreversibility of the different composing units of the cycles and the variation of gas properties owing to steam injection as well ...


    By Inderscience Publishers

  • Unheated Carpet Steam Cleaner Machines to Feature 30-Foot Hoses

    WOBURN, MA U.S.A. - Daimer Industries, Inc.®, a globally established provider of professional/industrial carpet steam cleaner machines, announced plans to offer enhanced length hose systems with each of four models included in the companies XPC-9200 series. The 20% longer hoses will measure 30 feet long and come with this popular unheated product line this month. "Our new, longer ...


    By Daimer Industries Inc.

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Quantifying Combined Heat and Power (CHP) activity

    In CHP plants without heat rejection facilities power, output is complementary to the recovery of heat, and all activity is cogeneration. CHP plants with heat rejection facilities can operate a mix of cogeneration and condensing activities. Quantifying the energy flows of both activities properly requires knowledge of the design power-to-heat ratios of the CHP processes (steam and gas turbines, ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you