heat recovery steam generator Articles

  • Power Substation and a Gas-Fired Combustion Turbine and Heat Recovery Steam Generator

    B&V Energy expands the world's largest nitrogen plant by constructing a cogeneration plant supplying the additional power needed to reach resources deep in Mexico's offshore oil field. Metropolitan Mexico City has a population of approximately 20 million and is one of the most densely populated areas in the world, requiring an extraordinary amount of gas and oil to satisfy its growing energy ...


    By Black & Veatch Corporation

  • Case study - Waste heat generates steam and savings

    OVERVIEW A coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost.  The facility was looking for additional ways to decrease their exhaust ...

  • In Situ electromagnetic heating for hydrocarbon recovery and environmental remediation

    Introduction Thermal recovery methods, as applied in heavy oil and oil sand deposits, and in environmental remediation, have the common objective of accelerating the hydrocarbon recovery process. Raising the temperature of the host formation reduces the oil and bitumen viscosity, and, in environmental remediation, increases vapour pressure. These effects assist in sweeping the substances ...


    By McMillan-McGee Corp.

  • Heat Recovery for Reuse in Proofing Ovens: Buttercup Bakeries

     By collaborating with a major tertiary research institution, RMIT University, Buttercup Bakeries has been able to apply new heat recovery technology suitable for bakery and other industrial applications. The initiative has resulted not only in cost and energy savings but more efficient oven heating boiler operations. Background Buttercup Bakeries is part of the ...


  • Full steam ahead

    RemedX managing director Richard Croft explains why thermal remediation techniques are good value even at a time of recession. In-situ thermal treatments of soils are usually applied in conjunction with other technologies. The process involves heating contaminated soils, rock and groundwater to exploit resulting physical and chemical effects on the contaminants present. To understand the ...


    By Newzeye Ltd

  • Pakistan SZS Gas Fired Steam Boiler

    Heavy Oil, Light Oil, Residual Oil, Natural Gas, City Gas, and Blast Furnace Gas can be used as Fuel. The boilers can also be applied to generate electricity at some districts where electricity power is in short. So are a variety of industrial productions, living and remote areas, and oil field. Even they can be used as a power plant boiler startup. SZS series oil & gas boilers are ...


  • Case study - Maximizing heat recovery from your oxidizer and reducing operating costs

    More and more, companies operating air pollution control equipment today realize that the initial capital cost of an oxidizer system can be rapidly eclipsed by continued operating expenses if careful attention is not periodically given to the system. Below are ten tips to ensure your oxidizer is operating at peak performance. The first five tips focus on parameters end-users should know about ...

  • Elantas enjoys significant steam savings with GEM

    Thermal Energy International Inc. is pleased to announce that ELANTAS Deatech S.r.l, a member of the global specialty chemical group Altana AG, and a leading producer of insulating materials for the electrical and electronics industry, has revealed that it is achieving significant savings in steam consumption at its site in Ascoli Piceno, Italy following the installation of Thermal Energy ...

  • Combined Heat and Power (CHP) essentials

    'CHP essentials' introduces the concept of power and heat 'production possibility sets', starting at the cradle of CHP, i.e., the thermal power generation plant. The latter always occasions 'fatal' heat that is either recovered (the 'merit' of CHP) or wasted (condensing). This split paves the way to defining the production possibility sets of CHP plants, shown for steam turbines, internal ...


    By Inderscience Publishers

  • Comparative study of steam injection effects on operation of gas turbine cycles

    In the present work, gas turbine cycles are modified with steam injection between the combustion chamber exit and the gas turbine inlet. Heat recovery steam generators, utilising the exhaust gases, provide these cycles with the injected steam at saturated vapour. The irreversibility of the different composing units of the cycles and the variation of gas properties owing to steam injection as well ...


    By Inderscience Publishers

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and ...

  • Application of Membrane Technology for the Recovery and Reuse of Water

    Abstract As water and sewer costs are expected to increase over the next decade, membrane technology will continue to be a viable and economical option in the recovery and reuse of water. This paper describes the mechanism of membrane effected separation (specifically reverse osmosis, ultrafiltration and microfiltration), membranes commercially available, membrane element configurations, and how ...


  • Opening markets for CSP – the industrial heat application

    Heavy industry can be a viable secondary market today for CSP producers, but questions remain on whether start-up costs are justifiable for industrial users, and how reliable CSP can be for processes that can't pace production by the sun. Solar thermal heat implies steam, and industries that need steam include refining, food processing, wood-working, desalination and chemicals, among others. ...


    By FCBI Energy

  • Sensitivity analysis and thermo-economic optimisation of Steam Injected Gas Turbine cycle design parameters

    The purpose of the present work is to apply thermo-economic concepts to a Steam Injected Gas Turbine (STIG) electricity generation system and optimise it to indicate its economical advantages over a simple gas turbine. The system incorporates a combustion chamber, gas turbine, a compressor and a Heat Recovery Steam Generator (HRSG). A detailed sensitivity analysis was also performed to examine ...


    By Inderscience Publishers

  • East coast power plant realizes 95% water recovery

    The Facility Bechtel Power Corporation builta power plant in Northampton, Pennsylvania for U.S. Generating Company. The power plant burns culm, a lower quality coal rejected from use in previous decades. By using culm as the fuel, U.S. Generating will clean up a solid disposal site. The power plant contains the usual systems including cooling towers and demineralizers that produce waste ...

  • Improving and maintaining the performance of your Heat Exchanger or Condenser.

    The usage of Heat Exchangers or Condensers is common in many processes across a wide range of industries. The Energy sector is no different, either in the Thermal Power Generation, Upstream and Downstream of the Oil and Gas including Petrochemical and Chemical plants; Heat Exchangers are used to cool of the steam or to pre-heat different liquid needed in the processes. The recurrent problem of ...

  • Electrical Resistance Heating: a Hot New Approach to Soil and Groundwater Remediation

    Electrical Resistance Heating (ERH) is an aggressive remediation technology that can quickly reduce the mass of volatile organic compounds (VOCs) in soil and groundwater by over 99%. The process is often used to clean sites where other technologies have had limited success. Larger ERH sites are cleaned within 6 to 12 months and smaller sites can be cleaned in half that time or ...


    By TRS Group, Inc.

  • GEM steam traps stop mechancial trap failure & reduce condensate return pressure by 51% at KNPC shuaiba refinery

    Keeping on top of the constant challenge of repairing and replacing thousands of mechanical steam traps is no longer a problem at KNPC’s Shauiba Refinery in Kuwait following the successful conversion of 1,750 mechanical traps to Thermal Energy International’s award winning GEM Venturi Orifice design.  In addition, KNPC, a subsidiary of the Kuwait Petroleum Association, has seen ...

  • Is it better to burn or bury waste for clean electricity generation?

    The use of municipal solid waste (MSW) to generate electricity through landfill-gas-to-energy (LFGTE) and waste-to-energy (WTE)projectsrepresentsroughly14%ofU.S.nonhydrorenewable electricity generation. Although various aspects of LFGTE and WTE have been analyzed in the literature, this paper is the first to present a comprehensive set of life-cycle emission factors per unit of electricity ...


    By Novo Energy, LLC

  • Case study - ElectraTherm commissions 10 green machines on district heating system in Europe

    ElectraTherm commissioned 10 Green Machine 4400s in Levice, Slovakia in June 2014. ElectraTherm’s Czech distributor, GB Consulting, facilitated the deployment of Organic Rankine Cycle (ORC) systems on a centralized district heating system in Slovakia as a means of increasing on-site efficiency and generating clean energy. ElectraTherm’s Green Machine generates fuel-free, ...


    By ElectraTherm

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you