heat safety Articles

  • Reduced Emissions for Landfill Gas Installations

    The use of landfill gas as a source of renewable energy is increasing. For environmental and safety reasons, the owners of the waste storage sites have to strictly monitor and control the construction, operations, and emissions generated. Sulzer offers solutions to control these emissions within the limits given by the government. Landfill gas is similar to natural gas, but it is created by ...


    By Sulzer

  • Frostbite And Hypothermia Hazards

    Hypothermia and frostbite can be two of the serious consequences of working outdoors in winter weather. Hypothermia is a dangerous lowering of the body’s temperature by exposure to cold or wet conditions. Actually, the air temperature doesn’t have to be particularly low to cause hypothermia – just getting wet and chilled can do the same thing. Hypothermia can be fatal. ...


    By SafetySmart

  • Biosolids Heat Drying: Safety in Design and Owner Operation

    ABSTRACTInterest continues to grow in heat drying as a means of processing biosolids into an aesthetically pleasing product form with multiple use opportunities, while also achieving a significant reduction in both volume and weight of biosolids for off-site hauling. As the number of heat drying installations increase, so too do reports of safety incidents—an indication that Owners and facility ...

  • Update on the homeowner heating oil safety bill

    All homeowners in Massachusetts should be aware that on December 29, 2008, the State Senate enacted the long-awaited Homeowner Heating Oil Safety Bill as Chapter 453 of the Acts of 2008. It required homeowners to upgrade their existing oil heat supply line and insurance companies to offer coverage for a spill by July 1, 2010. On January 5, 2009, it was signed by the Governor. On June 30, 2010, a ...


    By Penney Engineering, Inc

  • Beat the Heat: Occupational Exposure to Heat and Hot Environments

    With summer underway, now is the perfect time for organizations to examine their policies and procedures regarding employee heat exposure, especially in light of the recently published document from NIOSH titled, “Occupational Exposure to Heat and Hot Environments”, Publication Number 2016-106. What is the ...


    By Antea Group - USA

  • Comfort and safety

    Type HOFGAS® - Ready/C 300  Commissioning 2004Site Moncorneil (FR) Situation Moncorneil is a medium-sized landfill near Toulouse. A heating boiler is to be operated with landfill gas and the acquired heat is used for leachate treatment. In view of the complete landfill design the customer demands a container construction with remote monitoring of the plant.   ...


    By Hofstetter BV

  • The Major Components of Heat Exchangers

    Heat exchangers are not only one of the most common pieces of equipment found on industrial sites, they are also one of the most important. Despite the name, heat exchangers are used for both heating and cooling and are actually used more often for cooling, especially on industrial sites such as refineries or processing plants. These pieces of equipment are not “one size fits all.” In ...


    By STI Group, Inc.

  • Case study - Heat exchanger retrofit

    Overview A manufacturer of insulation films for the electronics industry needed to evaluate the capabilities of four existing oxidizers that treated emissions from its coating lines. The company was concerned that, due to oxidizer deficiencies, it would not meet regulatory requirements. The oxidizers had been manufactured by two different companies. One of them was no longer in business; ...

  • Identify Bias. Improve Safety.

    Too much information too quickly can crash even the most advanced computers. Luckily our brains are equipped with a failsafe that guards against processing meltdowns. This failsafe is called cognitive bias, and it helps us make decisions based on past experience and knowledge. Cognitive biases can be characterized as the tendency to make decisions and take action based on limited acquisition or ...

  • Safety in handling wood pellets

    Canada is primarily a bulk producer and exporter of pellets with large mills that make, on average, 56,000 tonnes per year, said Staffan Melin. When shipped in large volumes, pellets are classified as hazardous material, although wood pellets in consumer bags are benign. For example, carbon monoxide (CO) gas emissions released by pellets killed a person in the cargo hold of a ship in 2002. A ...

  • Compressed Gas Safety Guide

    Use and storage of any compressed gas under high pressure can be extremely dangerous if proper gas handling procedures are not observed. Moreover, chemical characteristics of specialty gases themselves can pose serious health hazards if containment is not tightly controlled. Paying close attention to a compressed gas product’s technical and safety information is invaluable for maintaining a safe, ...

  • Safety expertise in extreme environments

    Emergency safety showers are the first line of defence in the event of chemical spills and accidents in industry and a wide range of products has evolved to accommodate specific hazards. Meeting the needs of companies operating in extreme environments can be particularly challenging for the specialist suppliers of this vital equipment. Workers in the oil and gas industry frequently face extreme ...


    By Hughes Safety Showers

  • Safety Tips: Holiday Lighting

    The holiday season is upon us and nothing is more festive than outdoor holiday decorations. While the final look is certainly important, it is extremely necessary to guarantee that you don’t get hurt in the process of installing your decorations. The best outdoor decorations are gorgeous as well as safe. As a homeowner, safety should be the first priority when preparing your holiday ...


    By EHS Insight

  • Heat Protection Gloves: Which Professions Use Them?

    In a wide variety of industries, companies are required to provide the proper safety equipment for their employees. Health and safety has become a top priority for businesses in recent years, providing protection for both workers and the companies who employ them. Among other things, gloves have become a common protective item in the workplace. Particularly for workers who are dealing with high ...


    By Intersafety

  • Empirical validation of a new heat stress index

    Thermal stress is a well-recognised health hazard in the workplace. In addition to the health deficits, working in the heat can impact significantly on the productivity of some industries which are located in harsh environments. A long-standing dilemma in OHS has been the specification of what constitutes a safe working environment. The current indices used to evaluate the environment are either ...


    By Scarlet Tech Ltd.

  • Energy Savings on Process Heating Units Case History

    The Customer This specialty chemical company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The Project The company was increasing the ...

  • EIS Safety First - Case Study

    EIS was invited by a UK company to provide a fully automated VOC / odour abatement system treating the exhausts from multiple processes and needing multiple safety systems.  The abatement plant would be part of the construction of a new factory based in Scotland, so the timing and installation of the system would be critical to the plant coming on stream at the planned date. The production ...

  • Monitoring vibrations, mechanical seals, and bearings for safety and performance

    With more than 70 years of experience in plastics processing, Switzerland-based Quadrant Group is a leading expert in a wide range of polymer materials and technologies for polymer conversion. In order to maintain a high level of quality in the production process, Quadrant's heat-transfer pumps must work safely and reliably. These pumps are commonly subjected to high loads. At the same time, ...


    By ALLWEILER GmbH

  • Quebec recovers heat energy from sewage in Baied`Urfe

    Energy recovery from municipal sewage and greywater offers cities a new reliable resource.  Erwin Schwartz of DDI Heat Exchangers Inc. reports on a novel application of rectangular, wide-gap heat exchangers that has worldwide potential. The Canadian company DDI Heat Exchangers Inc. installed, with the support of the Quebec provincial government and municipal sewage authority, the first ...


    By DDI Heat Exchangers Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you