heat safety standard Articles

  • Fuel preparation technology – the latest safety considerations

    The specifications for new fuel preparation technologies are becoming increasingly sophisticated, as industry innovation continues apace. But when it comes to investing in waste shredders that help manufacture cement fuels, which criteria should top the procurement wish-list in 2018? With more than 25 years’ experience in this sector, Peter Streinik, head of UNTHA’s waste shredding ...


    By UNTHA Shredding Technology

  • Beat the Heat: Occupational Exposure to Heat and Hot Environments

    With summer underway, now is the perfect time for organizations to examine their policies and procedures regarding employee heat exposure, especially in light of the recently published document from NIOSH titled, “Occupational Exposure to Heat and Hot Environments”, Publication Number 2016-106. What is the ...


    By Antea Group - USA

  • Compressed Gas Safety Guide

    Use and storage of any compressed gas under high pressure can be extremely dangerous if proper gas handling procedures are not observed. Moreover, chemical characteristics of specialty gases themselves can pose serious health hazards if containment is not tightly controlled. Paying close attention to a compressed gas product’s technical and safety information is invaluable for maintaining a safe, ...

  • Heat Protection Gloves: Which Professions Use Them?

    In a wide variety of industries, companies are required to provide the proper safety equipment for their employees. Health and safety has become a top priority for businesses in recent years, providing protection for both workers and the companies who employ them. Among other things, gloves have become a common protective item in the workplace. Particularly for workers who are dealing with high ...


    By Intersafety

  • EIS Safety First - Case Study

    EIS was invited by a UK company to provide a fully automated VOC / odour abatement system treating the exhausts from multiple processes and needing multiple safety systems.  The abatement plant would be part of the construction of a new factory based in Scotland, so the timing and installation of the system would be critical to the plant coming on stream at the planned date. The production ...

  • Follow toxic gas standards for a smoother project

    Toxic gases, such as Hydrogen Sulfide and Sulfur Dioxide, can injure and kill quickly. Therefore, mitigation of these hazards must be fast and sure. The United States Occupational Safety and Health Administration (OSHA) and other authorities take detection of these gases very seriously. The American National Standards Institute/ American Petroleum Institute (ANSI/API) and ISA industry standards ...

  • Empirical validation of a new heat stress index

    Thermal stress is a well-recognised health hazard in the workplace. In addition to the health deficits, working in the heat can impact significantly on the productivity of some industries which are located in harsh environments. A long-standing dilemma in OHS has been the specification of what constitutes a safe working environment. The current indices used to evaluate the environment are either ...


    By Scarlet Tech Ltd.

  • SHEilds Christmas Gifts #1 – Electrical Safety

    Free Safety Tips for the Season It’s that time of year again! Time to start getting serious about Christmas shopping, dig out the annual decorations and of course switch on our seasonal lights. There’s an undeniably positive boost created by lights covering the inside and outside of the household; whether it’s to brighten up dark winter days, amaze your children ...


    By SHEilds Ltd

  • New Measures to Protect Workers from Heat Stress in China

    Work system to control heat exposure It is stipulated in the Measures that working time under high temperature shall be controlled by employers, unless exceptional cases of damaging life & property security and public interest exist. When the temperature reaches 40°C, outdoor work shall cease. When it stands at 37°C to 40°C, outdoor work shall not exceed more than ...


    By SGS

  • A Look at the Impact of Proposed Water Standard to Prevent Legionnaires` Disease

    From the standpoint of water treatment industry experts, failure to prevent legionellosis (or Legionnaires’ Disease) is the most significant water treatment problem today. Essentially every case of the disease is the result of exposure to inadequately managed building watersystems, and both utility and potable water systems can be the source of the hazard (i.e., Legionella bacteria). In ...


    By Phigenics, LLC

  • Technical brief - FR standards for weather protection & containment enclosures

    Introduction The worldwide market for temporary enclosures has steadily increased over the last two decades as facility owners, engineers and contractors recognise the safety benefits and cost-effectiveness of installing temporary enclosures. Apart from minimising weather-induced delays to a project, scaffold sheeting enhances site safety by preventing debris and small objects from falling ...

  • Managing compliance: Taking the heat out of fire code classification

    How are you managing the hazardous materials you use, store and produce in your facility? Do you have an accurate, up-to-date inventory of the hazardous materials and chemicals within your organization? And are all of those materials properly classified? More specifically, are these materials classified for fire code? Fire code classification long has been considered one of the more complex and ...


    By Verisk 3E

  • ASHRAE Standard 188P: Prevention of Legionellosis Associated with Building Water Systems

    For Presentation at the AWT 2011 Convention and Exposition  The American Society of Heating, Refrigerating and Air-conditioning Engineers (ASHRAE) has developed a proposed Standard Practice that specifies what is required to prevent legionellosis associated with building water systems. Standard 188P is a “Practices” standard – not a “Design” or ...


    By Phigenics, LLC

  • Safety Systems Depend on Reliable Field Sensors (Emphasis on Fire and Gas Detectors)

    Abstract Because not all hazards are the same, identifying and quantifying the hazard is the starting point in choosing sensing technology. Not all detectors are the same, and they should be selected according to their ability to detect the hazard. This paper gives a broad summary of technologies that provide users reliable responses to hazardous conditions, that minimise false ...

  • Identification and control of safety and health hazards in metal scrap recycling

    The audience for this guide is anyone who works in the metal scrap recycling industry—employers, employees, safety professionals, and industrial hygienists—should read this publication. This guide can help you identify and manage the hazards associated with exposure to various metals and processing chemicals and with related processes and equipment used in metal scrap recycling operations. Why is ...

  • Understanding the potential class II – Division I Safety Hazards present when operating Vertical Cuttings Dryers

    For decades, the industry standard for waste management dryers (a.k.a. vertical cuttings dryers) has relied on belt-driven sheaves. Though belt-driven systems are cost effective and relatively easy to implement, at a minimum they have represented a maintenance nuisance, at worst they represent a serious safety concern when ...


    By Elgin Separation Solutions

  • The Importance of high-quality service for regenerative thermal oxidizer

    The Importance of high-quality service for Regenerative Thermal Oxidizer. Safety, efficiency and compliance among pressures facing Regenerative Thermal Oxidizer operators. As any plant or maintenance manager working in a manufacturing environment using volatile organic compounds (VOCs) could tell you, the standards for support of all equipment along the process is critical for safety and ...

  • Generator gas analyzer for monitoring of hydrogen cooled turbo generators

    Hydrogen cooled generators require safety measures that reliably prevent the formation of explosive gas mixtures during normal operation as well as maintenance periods. Thermal conductivity technology based gas analyzers are used for that task. A standardized CALOMAT 6 analyzer system - Set GGA - has been especially designed for this measuring task. Regarding redundancy and explosion ...

  • In-situ Thermal Remediation Under an Apartment Building

    This paper presents the implementation and results of ET-DSP, an in-situ electrical soil heating technology, in combination with high vacuum dual phase extraction, to achieve the removal of vapour pressure sensitive BTEX compounds from under an occupied residential apartment building. Operating within several engineering, environmental, and safety constraints, a design was developed in order to ...


    By McMillan-McGee Corp.

  • Modernisation of the CDTN IPR-R1 TRIGA reactor instrumentation and control

    In the IPR-R1 TRIGA control room, analogue system based on relay-based logic was used, and mechanical strip chart recorders are used to measure, monitor and record the operational parameters. The same variables of the original control system are measured, although the reactor power was upgraded to 250 kW. For this new power the fuel heat transfer becomes important and new parameters should be ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you