heated fid analyzer Articles

  • Real Time TOC Analysis in Steam and Condensate

    Executive Summary Steam in petro/chemical plants could be contaminated with hydrocarbons (TOC = Total Organic Carbons) from various sources. In any case this is a sign for defects in the process, whether it they occur in the heat exchanger, the blow down vessel, the condensate recovery or other parts of the system. Conventional solutions to monitor such contaminations use TOC- ...


    By JCT Analysentechnik GmbH

  • Determination of TOC in stack through the innovative FID analyser easy to carry - Case Study

    PROBLEM: The industrial chimney's emissions of Volatile Organic Compounds (VOCs) are becoming issues of global importance and to have an accurate knowledge about how to test VOC turns into a strategic issue. VOC emissions are quantified and monitored according to standard EN 12619, using FID analyzer which uses hydrogen and other reference gases in ...


    By Pollution Srl

  • Energy Savings on Process Heating Units Case History

    The Customer This specialty chemical company is a leading supplier of performance polymers. Their products are used in a wide range of applications including adhesives, coatings, consumer and personal care products, sealants, lubricants, medical, packaging, automotive, paving, roofing and footwear products. The Project The company was increasing the ...

  • Case study - EPH in soil with diesel and home heating oils

    Sitelab’s UVF-3100 analyzer is a popular tool when excavating soils contaminated by fuel oils from underground storage tanks (USTs). These studies show the accuracy testing samples for Extractable Petroleum Hydrocarbons, EPH C11- C22 aromatic hydrocarbons. Samples are extracted in solvent using test kits and measured on the UVF analyzer’s EPH optics, calibrated to Sitelab’s PAH ...


    By Sitelab Corporation

  • Stack gas VOC monitoring

    POLLUTION S.r.l. manufactures POLARIS FID analyzer, a cutting-edge technology for the measurement of total hydrocarbons in ambient air and stack emission monitoring in accordance with EN 13526 and EN 12619. This analyser is based on Flame Ionization Detection (FID), a reference method technique to measure total hydrocarbons (THC, VOC, TOC). Polaris FID is a very handy instrument because it allows ...


    By Pollution Srl

  • Case study - EPH in soil with No. 6 fuel oil

    No. 6 fuel oils (heavy fuel oil, bunker C oil) is often used in industry for heat, steam or power generation. A consultant used Sitelab to investigate two different spill sites contaminated with subsurface plumes of NAPL resulting from leaking underground storage tanks (USTs). Soils were collected from borings using a drill rig and field screened for their EPH aromatic content. Split samples ...


    By Sitelab Corporation

  • Are your field soil screening procedures providing you with practical and accurate information?

    Untitled Document Environmental consulting activities frequently require that on-the-spot decisions be made in the field concerning the ...


    By Enviro-Equipment, Inc.

  • Case study - Paint mixing

    Overview A company involved in the automotive aftermarket had a paint batch mixing and filling operation that used primers and fillers. They were faced with installing air pollution control equipment to handle the volatile organic compounds (VOCs) emitted by the solvents used in their processes. An independent consultant had determined that total exhaust volume from the facility was ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you