heated turnkey gas analysis Articles

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Case study - Heat exchanger retrofit

    Overview A manufacturer of insulation films for the electronics industry needed to evaluate the capabilities of four existing oxidizers that treated emissions from its coating lines. The company was concerned that, due to oxidizer deficiencies, it would not meet regulatory requirements. The oxidizers had been manufactured by two different companies. One of them was no longer in business; ...

  • Rectify dry cycling of gas boilers and reduce energy costs by 25%

    Building engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and hot water demand. It is often thought that existing building management systems (BMS) and building energy management systems (BEMS) are optimising the boilers to remove dry cycling. However, the BMS is ...


    By Vital Efficienci Ltd.

  • Monitoring the performance of moisture purifiers for process gases

    Problem Statement Moisture purifiers are a big aid in keeping moisture levels under control inside a process chamber. They are provided by manufacturers with certain life expectancies, which vary depending on the moisture content of the gas being purified. As a result, it is difficult to determine which gases have a high moisture content and which moisture purifier is becoming ...


    By CIC Photonics, Inc.

  • Continuous monitoring of moisture present inside a process chamber

    Problem Statement Moisture inside a process chamber is a big silent killer during wafer production. When production yield goes down, it is hard to pinpoint the source of the problem. Most of the time wafers need to be sent to labs for analysis, while production is stopped. If the problem is related to a high level of moisture inside the reactor, there are several factors that can cause ...


    By CIC Photonics, Inc.

  • Detection and measurement of toxic gases from destructive testing of batteries

    Problem Statement New formulations of organic-compound-based batteries for vehicle use must be tested for release of potentially harmful and toxic gases if crushed in accidents. Potential gases include hydrocarbons, fluorocarbons, and hydrogen fluoride, released within seconds of an incident. Actual time-resolved and quantitative data are required from destructive testing to ascertain ...


    By CIC Photonics, Inc.

  • Catalytic Oxidizers…What You Should Know.

    Within the U.S., depending upon specific plant operations, geographic locations, etc.,  many companies concerned with controlling VOC emissions have been operating air pollution control systems for years.  However, due to business expansion, plant modifications or recent changes in EPA guidelines, an increasing number of companies are now finding it necessary to install new emission control ...


    By The CMM Group, LLC

  • A Breath of Fresh Air for Your

    As the full effect of the Federal Clean Air Act (CAA) Amendments continue to impact today’s industry, many companies will be required to install new or additional air pollution control equipment.  With over two decades of proven success, catalytic oxidation is a popular method for controlling volatile organic compound (VOC) emissions.During the past 25 years, industry has made progress in ...


    By The CMM Group, LLC

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you