heavy metals analysis Articles

  • Heavy Metals Analysis

    Correct measurement results are a prerequisite for compliance with limit values, which are always specified as total metals. Heavy metals such as copper, nickel, zinc, etc. can be quickly and reliably determined in aqueous samples with the help of the LANGE cuvette tests. Matrix factors (e.g. interference ions, colour, turbidities, etc.) may have a negative impact on themeasurement and cause ...


  • Heavy Metals in Vehicles

    Untitled Document Introduction Starting from September 1999, Ökopol has been performing a study on heavy metals in vehicles which was commissioned by DG ...

  • Heavy Metals in Waste

    Untitled Document Summary and discussion The aim of this report has been to demonstrate the existing knowledge regardng the harmful effects of heavy metals, the ...

  • Retention of heavy metals by stormwater filtration systems: breakthrough analysis

    Biofiltration systems are widely used to mitigate the impacts of stormwater on receiving waters, however their long-term capacity to retain heavy metals has not previously been assessed. Accelerated-dosing laboratory experiments were used to assess the likelihood of breakthrough occurring for three different types of soil-based filter media that are commonly used in stormwater biofilters. In all ...


    By IWA Publishing

  • Equilibrium analysis for heavy metal cation removal using cement kiln dust

    Ion exchange, reverse osmosis, and chemical precipitation have been investigated extensively for heavy metal uptake. However, they are deemed too expensive to meet stringent effluent characteristics. In this study, cement kiln dust (CKD) was examined for the removal of target heavy metals. Adsorption studies in completely mixed batch reactors were used to generate equilibrium pH adsorption ...


    By IWA Publishing

  • Online analyser for heavy metals: SEIBOLD Composer

    SEIBOLD COMPOSER Analyser can perform continuous analysis of heavy metals in water. The colorimetric analysis - stated by the WHO as reliable and best fitting method for online analysis - is used for reliable and accurate results and low total cost of measurement (TCM). Parameters: Aluminium Al (*) Arsenic As Cadmium Cd Cobalt Co ...

  • Heavy Metals Water Testing Powered by DNA

    Water pollution is a worldwide problem affecting developing and developed countries alike. Heavy metal contaminants are one prevalent type of water pollutant. They are persistent in the environment once d is charged and removal from source waters is necessary to ensure a clean drinking water supply. The problem of heavy metal pollution arises from several sources. Heavy metals such as uranium can ...


    By ANDalyze

  • Economic Evaluation of Air Quality Targets for Heavy Metals

    The European Commission has in recent years produced several Directives that aim to regulate air pollution by setting limits for the allowable concentration of pollutants in ambient air. Directives have already been agreed that cover pollutants such as sulphur dioxide, lead and carbon monoxide. For some other pollutants, such as the heavy metals arsenic, cadmium and nickel, the Commission intends ...


  • Spectroscopic study of the interaction of heavy metals with organic acids

    The ongoing progress in spectroscopic methods of analysis has resulted in a growing interest in the nature of pollutants and hence the possibility of controlling their levels in the environment. This paper describes a study of the fate of some pollutants in both soil and water at two selected areas in the north of Cairo, Egypt. Samples were collected from Shoubra Elkhima and Kafr ElSheikh during ...


    By Inderscience Publishers

  • Determination of heavy metals in Iranian and imported black tea

    Tea (camellia sinesis) is one of the most popular beverages all over the world. It has originated from China long time ago. About 75% of the estimated 2.5 million metric tons of dried tea that are manufactured annually are processed as black tea which are consumed by many countries (Nas et al., 1993). Currently, consumption of tea as a soft drink is very popular in Iran and its production in 2006 ...


    By University of Tehran

  • Impact of heavy metals on the oil products biodegradation process

    Oil products continue to be used as a principal source of energy. Wide-scale production, transport, global use and disposal of petroleum have made them major contaminants in prevalence and quantity in the environment. In accidental spills, actions are taken to remove or remediate or recover the contaminants immediately, especially if they occur in environmentally sensitive areas, for example, in ...


    By SAGE Publications

  • Affinity–based biosensors for heavy metal detection

    In recent years, there has been a pressing need for fast and reliable methods for environmental monitoring. Among the various pollutants, the heavy metals are some of the most harmful because these substances are non–biodegradable and retained by the ecological system. Conventional analytical techniques for heavy metals imply high cost, trained personnel and the repute that they are mostly ...


    By Inderscience Publishers

  • Removal of heavy metals from aqueous solution by limestone

    This study focused on the removal of Pb(II), Cd(II), Cu(II), and Zn(II) using reagent solutions by natural limestone in a batch system. The sorbent, collected from the Late Cretaceous limestone beds, Tunisia, was characterised by X–ray diffraction (XRD), chemical analysis (XRF) and infrared spectroscopy (FTIR). XRF showed that the studied limestone contained high amount of calcium carbonates. XRD ...


    By Inderscience Publishers

  • Origin and chemical partitioning of heavy metals in riverbed sediments

    Abstract: In the present investigation, bulk and chemical partitioning of elements in the Shefa-Rud riverbed sediments are studies. Higher concentrations of elemental concentrations have been observed in estuarine zone when compared with riverine sediments (except for Al, Fe, Pb and Mn). Manganese is mobilized under anoxic conditions prevailing in the Caspian Sea. Lithogenous materials are ...

  • Comparing Field Portable X-Ray Fluorescence (XRF) To Laboratory Analysis Of Heavy Metals In Soil

    ABSTRACT Field portable x-ray fluorescence (XRF) continues to gain acceptance as a complement to traditional laboratory testing of metal contaminated soil. The quality of data produced by field XRF varies with site conditions, soil composition, and sample preparation. Quality assurance protocols for the field method usually require that a number of field samples be split and sent to a ...

  • The effect of heavy metals on the activated sludge process and its microbial community analysis using 16S ribosomal DNA

    The effect of heavy metal shock loading on biological treatment systems was studied by traditional methods and molecular biological techniques. Two kinds of SBR (sequence batch reactor) operation units, unacclimated and acclimated activated sludge systems, were studied. The addition of special nutrients and powdered activated carbon (PAC) to stimulate heavy metal uptake and recovery were studied. ...


    By Inderscience Publishers

  • Analysis of the heavy metal pollutants in sediment samples collected from Thane Creek of Maharashtra, India

    The wetland of Thane Creek, located at Thane, Mumbai, India, has attracted much attention of environmental biologists over the last few decades, as this creek has been subjected to a lot of pollution from the Asia's biggest Thane–Belapur industrial complex located at the south of Mumbai harbour along the west coast of India. This paper advocates ecological studies with special reference to the ...


    By Inderscience Publishers

  • Analysis of build-up of heavy metals and volatile organics on urban roads in gold coast, Australia

    Urban water quality can be significantly impaired by the build-up of pollutants such as heavy metals and volatile organics on urban road surfaces due to vehicular traffic. Any control strategy for the mitigation of traffic related build-up of heavy metals and volatile organic pollutants should be based on the knowledge of their build-up processes. In the study discussed in this paper, the ...


    By IWA Publishing

  • Identification of source of heavy metal contamination in a site - a case study

    Accidental spills and improper disposal of industrial effluent/sludge containing heavy metals onto the open land or into subsurface result in soil and water contamination. Detailed investigations are carried out to identify the source of contamination of heavy metals in an industrial suburb near Bangalore in India. Detailed investigation of ground water and subsurface soil analysis for various ...


    By Inderscience Publishers

  • Simulating building downwash of heavy metals by using virtual sources: methodology and results

    When simulating concentration fields in the direct vicinity of plants emitting heavy metals by using the bi–Gaussian model IFDM and the reported emissions, the simulated concentrations were much lower than the measured ones. Detailed analysis of these results showed that this was due to building downwash. We show that it is possible for a bi–Gaussian model to simulate correct ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you