heavy oil recovery system Articles

  • Enhanced oil recovery scheme in the sultanate of oman

    The Facility This project is an Enhanced Oil Recovery Field and is located in the South-Central area of the Sultanate of Oman, approximately 660 kilometers from Muscat and 560 kilometers from Salalah. The design requirements for this Development are similar to most self-sufficient oilfields in a remote desert environment. The primary differences are the steam generation and ...

  • Heavy Industry Plant Wastewater Treatment, Recovery ang Recycle Using Three Membrane Configurations in Combination with Aerobic Treatment

    ABSTRACTIn the late 1990’s a major diesel engine manufacturing plant began evaluation of wastewater treatment technologies that would improve the quality of wastewater discharge, would produce treated effluent of reduced oil and grease, BOD and COD load suitable as feed to their sanitary waste biological treatment plant, and eliminate the costs and risks associated ...

  • Fuel alternatives for heavy equipment

    High fuel prices are leading composters and wood grinders to reevaluate diesel-guzzling heavy equipment, looking to alternatives that are both more cost-efficient and environmentally friendly. This could be as “simple” as filling up existing machines with biodiesel blends, could involve swapping out a diesel model for an electric one, or even go as far as generating electricity on site to power ...


    By BioCycle Magazine

  • Ivey-sol technology has potential to increase oil recovery of oil-sands waste by 15-25 percent

    Alberta’s oil sands are comprised of one of the world's largest sources of bitumen, containing an estimated 1.6 trillion barrels. About two tonnes of oil sands must be dug up and processed to produce one barrel of oil. Oil sands recovery processes include extraction and separation systems to remove bitumen from sand and water. Separating the oil from the sand is difficult and costly, and getting ...


    By Ivey International Inc.

  • Oil Skimmers Inc., solves environmental concerns for heavy equipment, maintenance and washdown facilities

    Beckwith Machinery Company of Murraysville, Pennsylvania, is one of the largest Caterpillar dealers in America, with 11 sales, service and manufacturing facilities in Pennsylvania and West Virginia. Beckwith's Cranberry, Pennsylvania facility also has a large rental business. When the machines are returned, many are loaded with mud, grease and oil. The mud can be removed simply by washing the ...


    By Oil Skimmers, Inc.

  • Common challenges relative to the use of Decanter Centrifuges for barite recovery in the oil & gas industry

    When centrifuges are properly deployed, they can have dramatic effects on drilling performance. In fact, without them, many of the advances made in drilling would not have been considered achievable. Classically, we believe that centrifuges can achieve two common goals: Reduce the content of drilled fines, specifically colloidal solids, and Perform barite recovery in order to reduce ...


    By Elgin Separation Solutions

  • In Situ electromagnetic heating for hydrocarbon recovery and environmental remediation

    Introduction Thermal recovery methods, as applied in heavy oil and oil sand deposits, and in environmental remediation, have the common objective of accelerating the hydrocarbon recovery process. Raising the temperature of the host formation reduces the oil and bitumen viscosity, and, in environmental remediation, increases vapour pressure. These effects assist in sweeping the substances ...


    By McMillan-McGee Corp.

  • Mercury recovery from industrial waste and toxic residues of natural gas drilling

    econ's client in the east of Germany is one of the few specialised companies in Europe for the treatment of mercury contaminated waste. Typical input material for this type of treatment is sludge from the natural gas industry or other residues from chemical processes, i.e. contaminated filter cake from waste water treat-ment. Among their most important clients are Shell, ExxonMobil, Wintershall ...


    By econ industries GmbH

  • Case study - Oil and gas production

    Problem The largest U.S.-based independent oil and gas producer and one of the largest independent processors of natural gas and natural gas liquids in North America was in search of new technologies to maintain the pollution control efficiency at their natural gas treatment facility. In typical gas plants, the well head natural gas needs to be treated to remove water, CO2, any ...

  • Ohmsett Trains Oil Spill Responders

    Abstract Ohmsett – The National Oil Spill Response Test Facility, located in Leonardo, New Jersey, is dedicated to providing independent and objective performance testing of full-scale oil spill response equipment; improving technologies through research and development; and for providing realistic training to response personnel. The U.S. Minerals Management Service manages the ...


    By OHMSETT

  • Offshore oil spill clean up case study

    In the event of a major incident occurring offshore, for example a tanker casualty running aground or breaking up for any reason, it is of paramount importance to deploy emergency response to protect and save human life. Once this has been done an assessment of the casualty should be made on whether it is possible to salvage the vessel and its contents and to assess the type and amount of oil ...

  • Oil refinery vapour gas case study

    1.0 Evaluation of Refinery Gases Various refinery gases are generated in the process of oil refining. These vary, depending upon the type of crude oil being distilled, such as Reduced Crude distillation, or Naphtha cracker. For the purposes of this case study the description and range of refinery gases are those gases produced from refining Crude Oil and Reduced Crude only. Crude ...

  • McLaren/Hart Inc. has success cleaning hydraulic oil

    McLaren/Hart, Inc., a full-service environmental engineering company with offices across the United States, was tasked with bringing a cost-effective solution for the automation and expeditious recovery of a heavy gear oil / quench oil from the subsurface of an automotive manufacturing facility. After evaluating several active recovery systems that would meet the free-product recovery objectives ...


    By Abanaki Corporation

  • New approach makes faster and efficient work of oil spills

    A comprehensive new study of oil’s behaviour in various sea conditions has resulted in significant advances in oil spill recovery using boom-style systems. Put into practice in DESMI ‘s Speed-Sweep Oil Spill Response (OSR) solution, the new approach speeds up oil recovery, increases encounter rates, covers a wider area in a shorter time and provides new flexibility in the choice of ...


    By DESMI A/S

  • New approach makes faster and efficient work of oil spills

    A comprehensive new study of oil’s behaviour in various sea conditions has resulted in significant advances in oil spill recovery using boom-style systems. Put into practice in DESMI ‘s Speed-Sweep Oil Spill Response (OSR) solution, the new approach speeds up oil recovery, increases encounter rates, covers a wider area in a shorter time and provides new flexibility in the choice of ...


    By DESMI A/S

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that were once abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain subs tances ...


    By Oil Skimmers, Inc.

  • Recycler solves waste oil problem, attains EPA compliance

    Environmental compliance is a major concern and challenge for the recycling industry. There are few recycling industries that face a stiffer challenge than auto recyclers. Vehicles that once were abandoned have become a valuable commodity. Junkers are now being crushed, shredded and recycled to make new steel. While autos contain a lot of valuable and reusable metal, they also contain substances ...


    By Oil Skimmers, Inc.

  • Falling Oil Price Forces Operators to Find Cost Savings in Water Management

    When oil prices were 80 to 100 dollars per barrel, water management costs were high, but they were tolerable when money was flowing profitably. However, as today’s falling price nears 40 dollars, water related costs are still high and only exacerbate widespread industry losses. The 150 US-based companies tracked by Oil & Gas Journal and Oil & Gas Financial Journal reported that ...


    By Biolargo, Inc.

  • Optimizing water management in hydraulic fracturing for shale oil and gas production

    Centralized treatment of wastewater is emerging as a viable solution for long-term efficiency in managing water sourcing and wastewater treatment in hydraulic fracturing. The number of hydraulic fracturing (fracking) shale oil and gas wells in the United States continues to increase. Within the Bakken Shale formation alone, in North Dakota and Montana, upwards of 15,000 hydraulic fracturing ...


    By WesTech Engineering, Inc.

  • Optimizing Water Management in Hydraulic Fracturing for Shale Oil and Gas Production

    Centralized treatment of wastewater is emerging as a viable solution for long-term efficiency in managing water sourcing and wastewater treatment in hydraulic fracturing. The number of hydraulic fracturing (fracking) shale oil and gas wells in the United States continues to increase. Within the Bakken Shale formation alone, in North Dakota and Montana, upwards of 15,000 hydraulic fracturing ...


    By WesTech Engineering, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you