high current rectifier Articles

  • Comparative control analysis of the Vienna rectifier based on its averaged model

    This paper presents a comparative evaluation of two multiple-loops duty-cycle-based control schemes applied to a three-phase three-switch three-level boost-type rectifier. The control laws are both elaborated on the basis of a state-space averaged model of the converter, expressed in the synchronous rotating frame. On the one hand, a control scheme that uses linear regulators is designed by using ...


    By Inderscience Publishers

  • Peristaltic Pumps play key role in rectifying the pH balance of mine water

    After decades of uncontrolled industrial (mining) activities, water supply is under serious threat. Studies show that acid water levels in the country's mines are rising at a staggering average rate of 0.59 m/day. The water situation is in fact threatening the population’s survival. At the heart of resolving this problem are the treatment of water and wastewater. This article looks at ...

  • Non-isolated single stage PFC rectifier for wide-input large step-down voltage applications

    This paper proposes a non-isolated single-stage high power factor rectifier suitable for applications requiring low-voltage and high-current output. The proposed converter integrates two buck-boost converters with a buck converter. As a result, the proposed converter can operate over a wide range of input voltage with extended low output voltage capability, making it suitable for universal input ...


    By Inderscience Publishers

  • Single–phase switch mode high power quality cycloconverters

    In this paper, we propose three new single–phase switch mode cycloconverters. Instead of simple switching scheme of P– and N–controlled rectifier–converters, high frequency switching of full bridge rectified outputs has been used with the help of SMPS topologies. This enables the input current switching at high frequencies and effective current shaping using passive filters. The input supply is ...


    By Inderscience Publishers

  • Difference between Frequency and high-frequency forklift

    First, the difference between the high frequency and power frequency Workers Electric Reach Truck charger power devices operating in the linear state, which means he used up the power device is always at work, and therefore would result in low efficiency of his work, generally in the range of 50% to 60%, have to say he is good linear ...

  • Drift Step Recovery Diode Transmitter for High Power GPR Design

    Some elements of the modern ground penetrating radar (GPR) determine its performance factor, resolution and depth of sounding. There are impulse transmitter, ultra-wide-band receiver as well as transmitting and receiver antennas. Improvement of the GPR's parameters is usually achieved by modernization of receiving circuits, antenna design, decreasing of input noises and using of complex ...


    By Transient Technologies LLC

  • Analysis of the conditions of use of the high-frequency power transformer and design principles

    According to the conditions of use of the high-frequency power transformer (transformer manufacturers) analysis, the overall two-fold: the feasibility and electromagnetic compatibility. Only pay attention to the feasibility of environmental protection awareness, must pay attention to electromagnetic compatibility. Feasibility refers to the specific conditions of use, high-frequency power ...

  • Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies

    Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well ...


    By CR Clean Air Group, LLC

  • A new microturbine-based dispersed generation scheme

    Almost all of the commercial microturbine-based dispersed generation systems today are composed of a high-speed permanent-magnet alternator and a diode rectifier-PWM inverter pair. A dispersed generation scheme made up of a microturbine, an induction generator, and a diode rectifier-PWM inverter pair is introduced in this paper. A complete model for the self-excited squirrel-cage induction ...


    By Inderscience Publishers

  • Marine AC UPS for Critical Offshore Installations

    Equipment installed in ships or offshore installations typically operate under tough conditions, and any possible equipment failures can have serious cost impact. Despite this, products not really suited for the applications are often chosen based on the initial cost rather than looking at the total cost of ownership. One example is the use of a modular marine AC UPS versus the use of a modified ...


    By Eltek AS

  • Customer case: Telenor reaps the benefits of remote power

    The Norwegian telco operator Telenor applies Eltek's "remote power" concept in their mobile network, distributing 380 V DC to Remote Radio Units (RRUs) - with significant documented savings as a result. In collaboration with Eltek, the Telenor Technology Centre has developed a solution for High Voltage Distribution which offers completely new opportunities and savings for the development of the ...


    By Eltek AS

  • Cereform - case study

    As part of the global AB Maury Group, Cereform is providing a comprehensive range of technical bakery ingredients like dough conditioners and softeners, bread mixes and concentrates, soya flours, cake mixes and concentrates, donut mixes and concentrates and toppings, fillings and icings. During the production of these products they have various dust producing processes. One of the processes ...


    By Inteliair Ltd

  • Recycling of cardboard, PET and aluminium drinks cans in new channel baling presses - Case Study

    Europe's largest logistics provider, Euro Pool System, in Hungary with new recycling hall In neatly lined-up wire cage carts, cardboard, PET bottles and cans from 175 branches of a supermarket chain in Hungary wait to be compressed into bales. The used packaging is carried via chain conveyors into two parallel channel baling presses and it's there they are tightly compacted. Two shifts a ...


    By HSM GmbH + Co. KG

  • Solution for the processing of TV and PC monitors - Case Study

    Bundles of power The disposal specialist L + N Recycling in Bubesheim had been trying to resolve a longstanding conflicting challenge: TV and PC monitor plastics should be compacted as tightly as possible for transportation, however, at the same time should remain in pieces that were large enough to be sorted later. The Bubesheim company found the solution in the HSM baling press. ...


    By HSM GmbH + Co. KG

  • Major waste management company and cbio combine resources, to resolve a breach of ammonia consent, in a large wastewater treatment plant case study

    The WWTP itself is located in the East Midlands, and treats dairy waste from a large processing plant, treating c1,500m3 of effluent per day. On 30th July the ammonia (NH3) levels in the permeate from the MBR at the plant began to increase. The effluent plant discharges to a river and as such, the consent limit is stipulated by the Environment Agency at 4mg/l. Within three days, the ammonia ...


    By Cleveland Biotech Ltd.

  • Pollutants, Aquaco Water Recycling Ltd can offer a solution

    With ever increasing demands from the Environment Agency to minimise pollutants in water effluent arising from industrial processes, Aquaco water recycling ltd can offer a solution which works well in many industries. This is the Red Box Electro Coagulation system whereby contaminants are flocculated by an electrical process into a size which can then be filtered, pressed and disposed of. The ...

  • Major waste management company and cleveland biotech combine resources to resolve a breach of ammonia consent in a large wastewater treatment plant case study

    The WWTP itself is located in the East Midlands, and treats dairy waste from a large processing plant, treating c1,500m3 of effluent per day. On 30th July the ammonia (NH3) levels in the permeate from the MBR at the plant began to increase. The effluent plant discharges to a river and as such, the consent limit is stipulated by the Environment Agency at 4mg/l. Within three days, the ammonia ...


    By Cleveland Biotech Ltd.

  • Leading banks commit to valuing natural capital

    Leading banks commit to Valuing Natural Capital Risk at Rio+20, but why, and how will this translate into action? The CEOs of 37 major financial institutions announced that they would be integrating natural capital considerations into their products and services as a result of their commitment to the UN backed Natural ...


    By Trucost Plc

  • 7 Theses on Storage Systems in Commercial Applications

    Solar storage systems are now the focus of attention more than ever before. The application areas are as different as the requirements. While private PV system operators work toward optimizing self-consumption, storage systems in industry are mainly used to provide control reserve and thus ensure grid stability. In commercial storage ...


    By SMA Solar

  • Flooding of lowland peatlands in Southeast Asia

    Vast lowland areas of Southeast Asia will be frequently and irreversibly flooded before the end of the century unless action is taken to stop the destruction of peatlands. A radical change in land-use is needed. In particular the palm oil and pulp wood sectors must stop developing new plantations on peat and plan to phase-out existing drainage-based plantations before they are flooded. If no ...


    By Wetlands International

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you