high efficiency combustor Articles

  • Two-Stage Combustion of High-PVC Solid Waste With HCL Recovery

    Untitled Document Abstract A waste-to-energy process based on high-PVC solid wastes is discussed. The basis is that at 200-400°C the PVC fraction decomposes ...

  • Combustion Of Heavy Fuels And Liquid Wastes

    This paper describes the design and operating conditions of liquid and gas combustors for heavy fuels and liquid wastes. Lower fuel prices can be achieved by switching from light oil to heavy ones, or combining with unconventional waste fuels. Unconventional waste fuels such as energetic off gases and organic liquid waste require especially designed combustion equipment like a special combustor ...

  • Detailed chemical modelling of a flameless combustion turbine for pollution prevention

    Flameless combustion has been acknowledged as one of the most interesting combustion technologies to meet both the targets of high process efficiency and low pollutant emissions. The present investigation is concerned with the application of the flameless combustion mode to an adiabatic combustor, typically used in gas turbine engines. Detailed chemical kinetics calculations, by means of a ...


    By Inderscience Publishers

  • What do a brewery and a wastewater treatment facility have in common? More than you think

    You may think that a brewery and a wastewater treatment facility are about as similar as day and night, hot and cold, old and young. But they have more in common than you think. ABUTEC has worked with both to ensure their waste-to-energy systems function at top capacity. Bell’s Brewery in Kalamazoo, Michigan, needed a way to save money, ensure compliance and practice sustainability. ...


    By ABUTEC LLC

  • Monroe Scrubbing System provides halide recovery at a major glass products plant

    Challenge A glass manufacturing plant was having trouble cleaning the emitted gases, particulate, and odors that resulted from its manufacturing process. Metallic Halides such as SnCl4 and TiCl4 were being applied to hot glass to impart special properties. The halide and oxide emissions were hazardous, extremely pungent, irritating in odor, and very difficult to scrub. ...

  • Incineration

    Introduction: High temperatures, 870 to 1,200 °C (1,400 to 2,200 °F), are used to volatilize and combust (in the presence of oxygen) halogenated and other refractory organics in hazardous wastes. Often auxiliary fuels are employed to initiate and sustain combustion. The destruction and removal efficiency (DRE) for properly operated incinerators exceeds the 99.99% requirement for hazardous waste ...

  • Case study - Amine tail gas treatment

    COVERING YOUR TAIL GAS The discovery of new shale formations throughout the world and the development of new drilling technologies have increased natural gas production and prompted government agencies to instigate tighter air-pollutioncontrol regulations on processing operations. Unfortunately, meeting environmental regulations is not a profit-generating endeavor. Simply put, the time ...

  • Thermal oxidizers for natural gas savings - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. Good news for the country and our environment. The ...

  • Compliance Issues Facing Midstream Production - Case Study

    It’s in the news every day; the natural gas production industry is experiencing record growth. The gas reserves in the United States are thought to hold enough natural gas for hundreds of years and the gas and oil industry has improved extraction techniques that make gas production more affordable and less impactful on the landscape. This is good news for the country and our environment. ...

  • What`s New? Biogas Power

    Technologies that connect the biogas line to the power line include cooling and clean up components, microturbines and reciprocating gas engines and control systems. TOP BILLING on the biogas to electricity stage typically goes to the microturbines and reciprocating gas engines. But in the theater of renewable energy from organics recycling, the show can’t go on without the supporting cast of gas ...


    By BioCycle Magazine

  • Recyclone MH System to Reduce Particulate Matter from a coal or palm shell BFB Boiler Flue Gas below 150mg/Nm3 - Case Study

    Foreword Advanced Cyclone Systems, S.A. (ACS) designed and supplied a Mechanical Recyclone (Recyclone MH) for Basuki Pratama Engineering. Basuki, based in Pulogadung (Jakarta, Indonesia) is the Indonesian leading producer of non-polluting high efficiency steam boilers, as well as thermal oil heaters using fluidized bed combustor or chaingrate stoker. The installed ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you