high pressure diaphragm pump Articles

  • Four Differentiating Facts – Solenoid Vs Hydraulic Diaphragm Metering Pumps

    Cost of Ownership: While it is true that solenoid pumps are often less than half the purchase price of hydraulic diaphragm metering pumps, the total cost of ownership tells a completely different story. Hydraulic diaphragm metering pumps last over 10-15 years in the field with almost no maintenance. Solenoid pumps usually need service and replacement diaphragms every 6-9 months depending upon ...


  • Hydroflo diaphragm pumps help reduce boiler corrosion and maintenance costs

    ABTCo, located in Alpena, Michigan, is a decorative wood paneling producer using three boilers to generate 7 MW of electricity – half the power needed in the plant plus steam for pulp processing. As in many boiler operations, the main enemy is corrosion, which can destroy system components and lead to boiler failure. Although internal boiler surfaces are protected by a film of magnetic ...

  • Pump with 900 foot head (that has hi-pressure, hi-flow, and hi-head pumping capacity)

    GRIFFIN 3 STAGE JET PUMPS These pumps are capable of delivering fl ow over 1,400 gallons per minute and head conditions up to 900 feet. They come equipped with hand-operated diaphragm primers as standard but can be equipped for automatic priming. Griffi n jet ...


    By Griffin Dewatering

  • Flying High

    Operating a biogas plant without gas quality and flow instrumentation is like trying to fly a ...


    By Gas Data Ltd

  • Importance of the Pre-charge of Pressure Tanks.

    A pressure tank consists of an air and water chamber that are divided by a membrane. The air in the air chamber is compressed dry air. This so called pre-charge is a very important factor in the operation of a system with a pressure tank. It acts like a spring and stores the energy in a tank that is used to supply pressurized water when the pump is not running. The membrane that separates the air ...

  • Case study - pumping bentonite

    Location: Germany Year: 2009 Working Context description The project is the construction of a big commercial and residential area in northern Germany during foundations phase. Diaphragm walls and Cut Off Walls are a techniques for the construction of permanent or temporary in-situ impermeable barriers. In order to stabilize side walls bentonite ...


    By Dragflow S.r.l.

  • Case study - pumping bentonite

    Location: Germany Year: 2009 Working Context description The project is the construction of a big commercial and residential area in northern Germany during foundations phase. Diaphragm walls and Cut Off Walls are a techniques for the construction of permanent or temporary in-situ impermeable barriers. In order to stabilize side walls ...


    By Dragflow North America

  • Deal With The Pressure - Protect piping system components with Pulsation Dampeners

    Metering pumps with operating pressures of up to 150 psig (pounds per square inch gauge) can create unwanted pressure pulsations within a piping system – a real problem in applications such as filling, mixing and spraying that require a combination of a metering pump’s accuracy and a continuous flow. But the issue can often be addressed with Pulsation Dampeners.The Pulsation Dampeners, usually ...


    By Lutz-JESCO America Corp.

  • Pump Performance Checklist

    Keeping your pump in shape will help reduce costs and boost profits! Cut fuel consumption, reduce replacement parts costs and minimize pumping time on every job! A PUMP THAT LETS YOU DOWN when you need it most causes obvious losses of time and money. Not so obvious, but every bit as costly, are losses you can incur with pumps that operate at less-than-peak efficiency. A pump ...


    By Gorman-Rupp Co.

  • Top 5 Causes for AODD Pump Failure

    1.       Air Valve Stalling, Clogging or Leaking: Stalling of the air valve often has to do with the design of the airways inside the valve. If the design in less than optimal it will stall under certain conditions. Same can be said about leakage of air where the air mostly blows through the valve instead of being redirected to push the diaphragm. Clogging on the other hand ...


  • Verderflex Peristaltic Industrial Pumps excel in diverse applications

    Verderflex Industrial peristaltic pumps are extremely robust pumps, ideal for heavy duty operations on intermittent or continuous duty cycles. They are a simple to use, easy to control, versatile and reliable way to pump liquids. Verderflex Industrial pumps can be used in a broad range of applications: Anaerobic Digestion Sludge Transfer Verderflex pumps were specified due ...

  • Qdos metering pumps selected by Russian automotive plant

    After a comprehensive evaluation and trial period, the Russian plant of steel wheel manufacturer, Mefro Wheels, has opted to use the latest Qdos 30 metering pumps from Watson-Marlow Fluid Technology Group at its facility in Togliatti. Selected ahead of diaphragm metering pumps, the Qdos 30 pumps have been fully integrated into a complex process control system at the plant’s ...

  • Replacement Fill Control Valves with Electronic Flow and Metering Improve Pressure, Stop Leakage and Prevent Valve Failures

    The City of Modesto, California is situated 90 miles east of San Francisco and has approximately 200,000 residents relying on 200,000 of gallons of water a day. The City needed to upgrade three water storage tanks that hold approximately 750,000 gallons each. After years of using motor operated valves to fill water storage tanks, the city recognized that there were just too many problems. ...


    By Singer Valve Inc.

  • Large Diameter Impellers Make Trash Pumps More Versatile

    The introduction of these impellers allow for a higher range of discharge pressure. Pumps are available in many types—diaphragm, positive displacement and progressive cavity—but the most common is a centrifugal pump. Centrifugal pumps have an impeller that spins, transferring energy to the fluid by centrifugal force and directing the water to the discharge point within the ...


    By Griffin Dewatering

  • AquFlow (formerly Hydroflo) metering pump helps make fireproofing system a success

    Problem: Part of developing innovative technology is making its application as easy for the user as possible. So when W.R.Grace&Co.-Conn. went to market with an accelerator for its Monokote family of fireproofing products, a key priority was making the system user-friendly. The accelerator can save users money because it makes the product more efficient to apply and increases ...

  • Industrial Peristaltic Pumps reduce the cost of ownership for paper and packaging manufacturer

    Challenge A leading paper and packaging manufacturer in Australia was using Air-Operated Double Diaphragm (AODD) pumps to deliver 4-colour ink to its printers. The on-site AODD pumps were using considerable amounts of compressed air and required constant maintenance due to the wearable parts (seals and valves). This was resulting in unacceptable long downtimes and high cost: for repair and ...

  • Peristaltic Pumps - A lot more than just heavy duty

    By design, the peristaltic pump is ideal for the dependable handling of abrasive, corrosive, viscous, high density and high solid content fluids. It thrives in those applications where other types of pump fail. Water and waste water industries, mining and chemical processing are all prime markets for this workhorse. But being equal to the tough demands of these applications is far from its only ...

  • Whole Life Costs and pumping Technology – Peristaltics Increasingly Out on Top

    Untitled Document Whole life costs are playing an ever-more important role in pump selection by the water and wastewater industry. Interestingly, energy use is no longer the ...

  • Sizing and Selecting the Proper Metering Pump: Part 1 of 2

    A typical agriculture or process application can consume large amounts of chemicals during daily operations. While the volumes may be large, though, they must also be very precise, with exact amounts delivered according to strict injection schedules. The pressures—from very high to very low—that the chemicals are injected at must also be governed precisely. This demand for ...


    By Modern Pumping Today

  • Blue-White’s “Flex-Pro” Peristaltic Pumps in Partnership to “Save Water and Protect the Environment”

    Over the years, the Environmental Protection Agency (EPA) has offered voluntary partnership programs to address a wide variety of environmental issues by working collaboratively with companies, organizations, and communities.  There are now more than 13,000 firms and other organizations participating in EPA Partnership Programs according to the EPA website.   One of the more highly ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you