high-pressure drain cleaning equipment Articles

  • Chemical Cleaning and Decontamination of Refinery and Petrochemical Distillation Equipment

    1. Abstract In refineries and petrochemical plants the equipment needs to be checked during planned shutdown. This can require several weeks of downtime, if columns, vessels, heatexchangers and tanks have to be drained to remove deposits and armful gases such as hydrogen sulfide, benzene and other volatile hydrocarbons. Formation of iron sulfide is very common in oil refineries and ethylene ...


    By Kurita

  • M-Coating – drain & sewer spraylining the economical solution to manhole shaft renovation

    M-Coating – Procedure for renovating a manhole shaft using ERGELIT Kombina KS M-Coating is a new, innovative renovation technique for both round and rectangular drainage shafts from 500mm to 1200mm. It is based on over 15 years of the Hermes company’s experience. Using this centrifuge spray technique, walls of shafts up to 10 metres deep can be coated to a realistic thickness. ...


    By HERMES Technologie Ltd.

  • Heat Pump Used to Drain Contaminated Sludge in a Steel Factory

    Summary In 1987, new regulations required that factories dispose of their contaminated water and waste themselves. Making galvanised steel wire, the Stelfil factory produces sludge contaminated with lead and zinc. Stelfil spent thousands of dollars to bury this waste and evaluated three systems to remove most of the water: a gas dryer, an induction heated screw conveyor and a heat pump system. ...


  • Maintenance To-Do: Coil Cleaning

    A coil-cleaning program should be an integral part of maintaining some kinds of process cooling equipment. Most people think of coil cleaning as a building or facility prepares to turn on the air-conditioners for another season. Admittedly, spring is a perfect time to put such cleaning and maintenance at the top of the to-do list. Condenser and evaporator coils are an integral part of HVAC ...


    By Evapco Inc.

  • Lanes cleans Cascade

    It is not just drains that benefit from Lanes’ cleaning skills. Earlier this year, the team was asked to help spring clean the Grand Cascade, a spectacular water feature at The Alnwick Garden, one of the most popular visitor attractions in the UK. The Grand Cascade is the largest water feature of its kind in the country, with 7260 gallons of water per minute tumbling down a series of 21 ...


    By Water Active Ltd

  • Two models for tank cleaning

    Fluid treatment specialist Algae- X International, Fort Myers, Fla., has expanded its Mobile Tank Cleaning (MTC) series with two new models. The MTC 500-AFR is an adjustable flow rate system for use with a wide range of tank sizes and fluid types such as diesel, biodiesel and hydraulic fluid. The MTC 1000-LX is the next generation of Algae-X’s MTC 1000 unit, now with stainlesssteel plumbing and ...


    By AXI International

  • Cleaning & maintenance management

    Mercury is a known neurotoxin that is extremely toxic even in small amounts. It directly affects the central nervous and renal systems, causing developmental delays, motor and brain problems like those associated with autism. Mercury’s hidden danger also lies in when at room temperature and exposed, it vaporizes readily. Once it has become an aerosol, it is absorbed into the lungs and ...


  • How Important Mobility in Car Wash Equipment?

    If you own a mobile car wash business, it is required that your car wash equipment is designed specifically for easy transportation. Bulky machines are suitable for fixed location car washes, but when you need to spend the entire day traveling across the city to different clients, you need car wash equipment that is mobile and corrosion/chip resistant, to keep the system looking like new even in ...


    By Daimer Industries Inc.

  • Does Your Mobile Car Wash Equipment Have the Right Flow?

    When looking for the right kind of mobile car wash equipment, most people look for units that are effective and convenient. Mobile units can make it easy to navigate around different-sized vehicles as well as clean those hard-to-reach areas. When you need to take the detailing job to a client’s residence, a mobile unit is a practical option. Naturally, optimum cleaning efficiency is also a ...


    By Daimer Industries Inc.

  • Lances for Steam Cleaners Improve Grout and Hard Surface Cleaning

    Daimer Industries, Inc.®, a highly-ranked e-commerce supplier of professional cleaning contractors and consumers, announced shipping and product plans for six new add-on accessories for it s KleenJet® line of steam cleaners. The new products include two lances, adapters and accessories for scraping and drain plunging. "Our latest accessories for steam cleaners address a key issue facing ...


    By Daimer Industries Inc.

  • Water Jet Floor Cleaning and Effluent Recycling System: SCS Specialised Services

    SCS Specialised Services Pty Ltd has developed a method of cleaning industrial concrete floors which recycles the wash water (the Recovery Jet system). On average, this has resulted in an 85 per cent reduction in the quantity of effluent generated. Background SCS Specialised Services Pty Ltd is a small floor cleaning and protective coatings business, specialising in cleaning ...


  • Benefits of the Best Pressure Washers Powered By Electricity

    Ask any expert about the best pressure washers and they are likely to mention the electric powered versions. Since they run on electricity, the electric-powered ones are highly versatile and ideal for use in almost all settings with reliable electrical supply. The cleaning efficiency of the best pressure washers is measured in terms of their pressure in psi (pounds per square inch) and flow ...


    By Daimer Industries Inc.

  • Crossflow Membrane Filtration High-Purity Water Systems

    INTRODUCTION As the electronics industry continues to provide us with such products as high resolution television, notebook size portable computers and cars with automatic navigation systems, it becomes necessary to produce semiconductors with finer device geometries to allow for efficient placement of more circuits per a given area. This requires increased control of a semiconductor's material ...

  • Top 10 Valve Considerations for Pressure Management Zones/DMA’s

    For basic pressure management or more advanced modulating pressure management, water suppliers create a network of District Metered Areas (DMA’s) or smaller, more manageable pressure management zones. The DMA or pressure zone gives the ability to measure flow and control pressure, when a Pressure Reducing Valve (PRV) ...


    By Singer Valve Inc.

  • How To Avoid Penalties For Not Containing Spills

    "Chemical spills can cost your company millions of dollars not to mention the bad publicity that results from suffering a spill. Every business wants to avoid the possibility of an uncontained hazardous material spill if at all possible. To do this you need a spill containment system designed for the type of hazardous materials that your handle. Safe Drain ...

  • Power plants use oil skimmers to prevent contamination from spills

    Most hydroelectric plants designed in the 1960s were built with a station drainage sump that collects all drainage from the plant. As designed, float switches activate sump pumps that discharge liquids directly into the tailrace. The system cannot distinguish between types of liquids, so in the event of an oil leak, oil in the sump could be released into the tailrace. Modern ...


    By Oil Skimmers, Inc.

  • LINZ - ASTEN (Austria) Municipal WWTP - Case Study

    Number of Tanks: 8 Total Volume: 92,000 m³ Water Depth: 7.4 m SOTR Standard Oxygen Transfer Rate: 9,740 kgO2/h Total Airflow: 73,600 Nm3/h No. of AEROSTRIP® Diffusers: 3.328 Linz is the capital of Austrian federal state “Upper Austria” and third-largest ...


    By Aquaconsult Anlagenbau GmbH

  • How to Select Steam Cleaners with Right Accessories?

    Steam cleaners require many accessories, including different types of detailing brushes. However, not every steamer carries the right accessories. Here are a few tips to selecting steam cleaners with the most appropriate accessories. Large assortment The more varied the accessories, the more versatile the steam cleaners are. Steam cleaners are needed for a variety of cleaning ...


    By Daimer Industries Inc.

  • Machine shop for oil and gas services provider wins when the chips are down

    Chip Filtering Keeps Machine Shop Coolant Clean Since 1976, Facility Engineer Jay Wilson has handled the HVAC, electrical, and other operational facility needs for a key Texas-based plant within the FMC Technologies, Inc. (FMCTI) family. This leading global provider of technology solutions for the energy industry and other industrial markets was twice named as the Most Admired Oil and Gas ...


    By Abanaki Corporation

  • Environmental incident response, North-East England

    Project The Remediation Strategies Response Team were called-out to a manufacturing facility to assist with a potential pollution incident arising from contamination of the site’s surface water drainage system.  During weekend work, a concrete cutting contractor had disposed of a large volume of concrete cutting slurry into the site’s surface water drainage system.  ...


    By Remediation Strategies Ltd.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you