high pressure water Articles

  • Senix Water Level Sensors Drive Irrigation Automation Project

    Australia’s Water Crisis Irrigation management is serious business in Australia especially within the Murray-Darling Basin, a 1,000,000 square kilometer watershed that is home to Australia’s most productive agricultural land. The basin’s 23 rivers have ...


    By Senix Corporation

  • European water policies and human health — Combining reported environmental information

    Society depends on the satisfactory and sustainable management of water. Historically, the primary purpose of water treatment was to protect human health, through reducing disease being transmitted through water. Subsequent measures to address environmental concerns have broadened our expectations of what water and waste water treatment should deliver. This report considers three pieces of EU ...

  • Porirua New Zealand – WaStop® DN225 - Case Study

    Porirua City located 20 km north of Wellington has over 70 storm water outlets into the harbour. A number of these outlets are very flat on their approach to the harbour which generally means they are severely influenced by high tides. The problem with these outlets is that if a rain fall event coincides with a high tide, the ability of the storm water network to discharge is severely restricted. ...


    By Wapro AB

  • Case study - Procurement and installation of a Biogas desulphurization unit at the Chania WWTP

    A proposal based on Bioconservacion’s technology was selected as the winning bid in the public tender released in 2015, covering the design, procurement and construction of a biogas desulfurizing unit to be installed in the waste water treatment plant in Chania, Greece. With a population over 100,000, Chania is the second largest municipality in the Greek island of Crete. Its waste water ...


    By Bioconservacion SA

  • Seven Ways Your Facility Isn’t Meeting Effluent Regulations and How to Solve Them

    Whether you own, operate, or help manage a municipal or industrial facility that deals with wastewater, it’s important to understand how wastewater treatment can play a significant role in the overall health of your business, especially when it comes to meeting effluent regulations. This is an important part of the wastewater treatment process to consider, as ignoring it could earn your ...


    By SAMCO Technologies, Inc.

  • Raw material cycle: from chip to briquette to product - Case Study

    Thanks to their briquetting system from RUF Frischhut can redeploy production scrap and melt it again Ludwig Frischhut GmbH and Co. KG have closed the circle on their raw material cycle by utilising a briquetting press from RUF: cast chips produced during the machining of parts for water supply and sewage disposal are pressed to solid briquettes and then melted in the in-house foundry and ...

  • Protect your high pressure pump

    There are many opportunities to protect your high pressure pump. The best pump protection is selecting the right pump for the application. The next best pump protection is proper installation. And the easiest pump protection is regular maintenance. Pump Selection Selecting the correct high pressure pump for the application will offer the best pump protection. Trying to get a pump ...


    By Cat Pumps

  • High Pressure Washers Mean High Quality Cleaning Power!

    Whether you are buying electric pressure washers, or gas pressure washing systems, pressure level is an important point to consider. These machines use pressurized water to forcibly lift and remove sedimentation from different surfaces. They are very different from steam vapor machines, which simply soften and dissolve different kinds of dirt and debris. With a pressure washing machine, the ...


    By Daimer Industries Inc.

  • Industrial Equipment Maintenance with High Pressure Washers

    High pressure washers often are the best way to deal with the challenging cleaning needs of the commercial and industrial sectors. Newer versions of these advanced cleaning machines continue to make their appearance with superior technologies and heightened build quality. These machines are continuously researched and updated with newer features to make cleaning industrial equipment easier and ...


    By Daimer Industries Inc.

  • The duty-factor - choosing a quality high pressure system

    Definition of Duty-Factor The duty-factor of your pump or system could simply be the product life. Or the duty-factor could be more specifically defined as the length of time a pump or system runs between servicing and the type of performance during this time frame. Elements determining Duty-Factor The duty-factor is affected by many variables including ...


    By Cat Pumps

  • Choosing a High Pressure Washer for Industrial Applications

    High pressure washer machines are used for a range of industrial applications. The best high pressure washers are used for cleaning machinery, equipment, and vehicles, as well as removing grease, chemicals, and dirt from factory floors and other surfaces. A high pressure washer, with its powerful spray of water, dislodges and washes away dirt from all kinds of hard surfaces. When you are ...


    By Daimer Industries Inc.

  • European waters - assessment of status and pressures

    EEA 2012 'State of Europe's water' assessments 2012 is the European year of water in which the European Commission published its 'Blueprint to safeguard Europe's waters' (referred to hereafter as the Blueprint) comprising reviews of the Water Framework Directive (WFD) (2000/60/EC), water scarcity and drought and adaptation to climate change policies. To accompany and inform the blueprint, ...

  • A CFD study of the effect of venturi geometry on high pressure wet gas metering

    Venturi meter is increasingly being preferred as wet gas flow meter because of its simple construction and ease of operation. It has been found that the performance of venturi in single phase gas is very different from that of water. In this work, with a view to optimise the design, the effects of diameter, diameter ratio and convergent angle on the performance of a venturi meter for wet gas ...


    By Inderscience Publishers

  • Trailer Mountable High Pressure Wash Systems for Industrial Maintenance

    Industrial power wash machines are heavy-duty versions capable of generating adequate pressure levels, flow rates, and temperatures, to efficiently manage industrial cleaning applications. These power cleaner machines are more robust than their counterparts designed for commercial applications. Due to the high quality components and materials, such high pressure washer systems, guarantee ...


    By Daimer Industries Inc.

  • Replacement of Hot Caustic Paint Stripping Process with High Pressure Water Jet System: Ford Australia

    Ford Australia Ltd replaced an existing hot caustic paint stripping process, used for cleaning car skids, with a high pressure water jet system. This project has resulted in annual savings in the order of $300,000 from reduced chemical, energy and waste disposal costs. Significant improvements in paint quality were also achieved through the ability to clean the skids on a more regular basis than ...


  • How to Choose the Best High Pressure Washers for Commercial Cleaning

    Investing in high pressure washers could drastically change the way cleaning tasks are undertaken in different commercial areas. While industrial areas may have to deal with some of the most challenging cleaning jobs, they usually don’t have to deal with the volumes of traffic that commercial areas face. Whether it’s an office building, a shopping mall or a hotel, these places need to ...


    By Daimer Industries Inc.

  • Use of Side Drains in Triaxial Testing at Moderate to High Pressures

    Side drains are used in triaxial tests to increase the rate of consolidation and equalize pore water pressures within the specimen. However, the efficiency of the side drains has been shown to be a function of time and effective confining pressure.This paper presents the results of (1) a mail survey on side drain practice, which indicates that many laboratories use side drains not recommended by ...


    By ASTM International

  • Binary vs. Quaternary Pumps: High Pressure Mixing vs. Low Pressure Mixing

    Welcome to the next installment in my series on binary vs. quaternary pumps for liquid chromatography! In my previous post, I discussed how gradients are created as well as the importance of having accuracy and precision in your gradient. ...


    By Waters Corporation

  • A Comparison between Steam and Hot Water Pressure Washers

    Steam pressure washer machines are a gradual extension of hot water pressure washers. The main difference lies in the output temperature. While steam pressure cleaners provide an output of 330 degrees Fahrenheit, hot water machines offer an output pressure of 210 degrees Fahrenheit only. The other important specifications, such as output pressure and technologies present, do not change much ...


    By Daimer Industries Inc.

  • Flying High

    Operating a biogas plant without gas quality and flow instrumentation is like trying to fly a ...


    By Gas Data Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you