high pressure water jetting industry Articles

  • Water Jet Floor Cleaning and Effluent Recycling System: SCS Specialised Services

    SCS Specialised Services Pty Ltd has developed a method of cleaning industrial concrete floors which recycles the wash water (the Recovery Jet system). On average, this has resulted in an 85 per cent reduction in the quantity of effluent generated. Background SCS Specialised Services Pty Ltd is a small floor cleaning and protective coatings business, specialising in cleaning ...


  • Industrial Pressure Washer for Removing Heavy Layers of Grime and Grease

    An industrial pressure washer usually has pressure level ranging from 1000 to 3500 psi. This machine also heats water to high temperatures; a commercial pressure washer can reach temperatures as high as 330°F. This combination of heat and high pressure works to dissolve dirt and grease and wash it away from the surface. An industrial pressure washer may also use cold water when heat is not ...


    By Daimer Industries Inc.

  • Pressure Washing Equipment for Temperature Control

    Pressure washing equipment with heating capabilities has one advantage over non-heated pressure washing equipment. These machines can use hot as well as cold water. Therefore, when purchasing pressure washing equipment, it is always a good idea to purchase machines that allow for temperature control. Hot Water Applications Hot water cleans where cold water cannot. Heat acts on ...


    By Daimer Industries Inc.

  • Injecting Innovation Into The Food And Beverage Industry

    Not all water treatment needs are the same. That’s why it’s imperative to work with those that understand the subtle differences that make each industry unique. For food and beverage companies, that means aligning with a company focused on oxygen transfer with a track record of innovation in jet aeration and mixing. Water Online spoke with KLa Systems to discuss its success within the ...


    By KLa Systems, Inc.

  • Muddy waters

    Mark Zwinderman of Surface Active Solutions, looks at the dangers involved in the cleaning and maintenance of mud tanks and associated equipment The oil industry involves many thousands of people working daily in potentially hazardous circumstances with dangerous chemicals and sophisticated engineering equipment. There has been a consistent and determined drive by the industry to reduce the ...

  • Controlling Scale Deposition and Industrial Fouling

    It costs US industry billions of dollars a year to control and remove the limescale that builds up in industrial equipment such a heat exchangers, evaporative coolers, boilers, chillers and other water fed equipment. Oil wells, for example, face significant scaling problems from the highly mineralized water that are extracted with the oil. Limescale not only increases downtime, maintenance ...

  • Controlling scale deposits in the pulp & paper industry

    The pulp and paper industry is one of the heaviest users of water within the North American industrial economy, requiring on average 54 cubic meters of water per metric ton of finished product.  As water is used in nearly every part of the manufacturing process, accumulation of scale is a phenomenon that can occur in all pulp and paper making processes. This occurs even with the purest water ...

  • Daimer Debuts Carpet Cleaners For Car Rental Industry Steam Cleaner Tasks

    Daimer Industries, Inc.®, the most respected American brand of high-powered carpet cleaners, including industrial truck mount carpet cleaners, portable heated commercial carpet extractors, and a diversified line of commercial carpet cleaners with total models exceeding 600 shipped to over 200 countries, is now shipping the XTreme Power® XPH-5900IU with a high pressure level of 170 psi and ...


    By Daimer Industries Inc.

  • Electronic water treatment reduces fouling in heat exchangers

    The deposition of material on heat transfer surfaces is called fouling which significantly impacts on the thermal and mechanical performance of heat exchangers. Fouling increases the overall thermal resistance and lowers the overall heat transfer coefficient of heat exchangers as well as impeding fluid flow, accelerating corrosion and increasing pressure drop across the heat ...

  • ELECTRONIC WATER TREATMENT REDUCES FOULING AND CORROSION IN PIPELINES

    Increasing pressure loss in the pipeline is often caused by scale corrosion or product fouling of the internal surfaces. This condition slows transmission and distribution capacity, and can require more than just routine maintenance if it remains unaddressed. Interior corrosion, fouling and leakage in pipeline systems will adversely impact bottom-line operations. ...

  • Case study - Beltran WESPs deliver superior gas cleaning performance for Zambia’s fast-growing copper industry

    The central importance of copper production to the Zambian economy is reflected in the fact that the value of copper exports in 2010, about $5.8 billion, accounted for 78 percent of the country’s total merchandise export earnings, and helped make it the seventh largest producer in the world. Capitalizing on a worldwide surge in copper prices and the coincident privatization of ...


    By Beltran Technologies, Inc.

  • Chemical Industry: Ammonia Emergency Plan Calls on Packed Tower to Scrub Released Chemicals Case Study

    A few years ago Union Camp turned a corner. Management decided that advance planning would take the place of reacting after the fact to an emergency or regulatory agency demands. At Union Camp’s Dover, OH. facility, byproducts of the paper industry are converted into usable specialty chemicals for cosmetics, adhesives and other industries. Crystallization is a process used intensively with ...


    By CR Clean Air Group, LLC

  • Use of Water Based Paint To Reduce Solvent Emissions: Brisbane Motor Bodies

     Background For the last twelve months Richard Powell has been using water based 'base coat' paints in his smash repair business at Woolloongabba. These paints use water, instead of solvent, as the carrier for the basic paint constituents, and do not release any harmful vapours to the atmosphere. Richard has been in the smash repair business for more than twenty five years and ...


  • Double Duty Scrubber for TDI Fumes A case-history description of a relatively uncomplicated but effective method for handling large runaway emissions of TDI and solvent vapors.

    NKI (B. V. Nederlandse Kleurstofindustrie, a subsidiary of Morton-Thiokol, Inc. U.S .A.), and one of the major industrial firms in the Netherlands, had a problem with extremely toxic TDI (toluene di-isocyanate) emissions from one of their processes . On a batch basis in different reactors, the largest being 6.5 m cubed(1717 U.S . gallons), a solution polymerization of TDI with polyols in a ...


    By CR Clean Air Group, LLC

  • Tank cleaning in Abu Dhabi case study

    In 2008 we signed an agreement with an Abu Dhabi based industrial and utilities contractor. They wanted to increase their portfolio by offering tank cleaning services. Over a period of four months we trained a number of their operators and sourced new equipment to enable them to approach new clients. In 2009 we were awarded a contract to clean two crude oil tanks. Utilizing local labour, the new ...

  • Knowing How to Select the Best Carpet Cleaners

    Before you purchase a commercial carpet cleaner, you need to be certain about your requirements. If you purchase the wrong type of commercial carpet cleaner, you could lose hundreds of dollars on the purchase, and the wrong carpet cleaner could lead to further costs in terms of productivity. This carpet cleaner buying guide offers tips for selecting the right carpet cleaner. ...


    By Daimer Industries Inc.

  • Waterjet Solutions Set NLB Apart

    It's a classic American success story: a young man thinks he can build a better mousetrap, works very hard, and becomes a leader in his field. Forty years ago Forrest Shook had that dream, and today his NLB Corp. is known around the world for innovative high pressure waterjetting equipment that makes contractors more productive. NLB manufactures the waterjet industry's most comprehensive line of ...


    By NLB Corp.

  • Commercial Carpet Cleaners for Deodorizing Carpets

    Carpets are an important part of any décor, but they need regular cleaning and maintenance to maintain their beauty. Commercial carpet cleaners remove odors and germs that reside on unclean carpets. Depending on who uses the carpet and how often, the carpets can carry molds, pet hair, pet urine, food stains and mud; some carpets may even carry bedbugs and fleas. No matter how clean the ...


    By Daimer Industries Inc.

  • Japanese metal powder manufacturer relies on U.S. Rotary Batch Mixer

    Nippon Atomized Metal Powders Corporation uses a patented water-jet atomization process to make high-quality super-fine metal powders from copper, bronze, brass, silver, gold, and stainless steel that are of consistent composition and particle size. Nippon Atomized Metal Powders refined the process of water-jet atomization to produce metal powders with well-shaped, uniform particles in the range ...

  • Daimer Unveils Carpet Cleaners For Aircraft Maintenance Professionals Seeking Robust Steam Cleaner Machines

    Daimer Industries, Inc.®, the most renowned supplier of American produced cleaning machines to more than 200 countries for a variety of applications and markets, including such technologies as professional carpet cleaning machines, pressure-optimized truck mount carpet cleaners, and general carpet steam cleaners, is now shipping its 500 psi XTreme Power® XPH-9600 to the airline industry ...


    By Daimer Industries Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you