high pressure water jetting unit Articles

  • The case for water jet tank cleaning

    To maintain a consistently high level of product quality, today's processing plants must ensure that their tanks and reactors are thoroughly cleaned on a regular basis. The direct expenses involved can be substantial, and adding indirect costs {e.g., downtime and compliance with safety and environmental regulations) puts extreme pressure on tight operations budgets. To meet this challenge, more ...


    By NLB Corp.

  • Lanes high-powered jetter relieves village flooding risk

    Lanes for Drains engineers have saved a community near Bristol from the threat of flooding by cutting tonnes of calcite from a pipe taking spring water to the River Avon. They brought in a trailer-mounted jetting unit that can deliver water at up to 15,000 PSI Ð up to twice the pressure of a conventional HPWJ machine Ð to blast the mineral deposits. Engineers at the Lanes for Drains ...


    By Water Active Ltd

  • Use of Water Based Paint To Reduce Solvent Emissions: Brisbane Motor Bodies

     Background For the last twelve months Richard Powell has been using water based 'base coat' paints in his smash repair business at Woolloongabba. These paints use water, instead of solvent, as the carrier for the basic paint constituents, and do not release any harmful vapours to the atmosphere. Richard has been in the smash repair business for more than twenty five years and ...


  • How a new source of water is helping reduce conflict in the Middle East

    Scientists and others look to desalination as a way to unite longtime enemies in a common cause. Ten miles south of Tel Aviv, I stand on a catwalk over two concrete reservoirs the size of football fields and watch water pour into them from a massive pipe emerging from the sand. The pipe is so large I could walk through it standing upright, were it not full of Mediterranean seawater pumped ...


    By Ensia

  • Dredging Technology – Underwater Excavation and Construction

    The presence of water is ussualy considered a nuisance in construction, particularly when excavating removing water is common practice. In some cases however, water can be a very useful tool that may simplify things greatly. With the “flooded excavation principle”, the construction site is flooded after the retaining walls have been installed (e.g. sheet pile). When the ...


    By BBA Pumps

  • Injecting Innovation Into The Food And Beverage Industry

    Not all water treatment needs are the same. That’s why it’s imperative to work with those that understand the subtle differences that make each industry unique. For food and beverage companies, that means aligning with a company focused on oxygen transfer with a track record of innovation in jet aeration and mixing. Water Online spoke with KLa Systems to discuss its success within the ...


    By KLa Systems, Inc.

  • Double Duty Scrubber for TDI Fumes A case-history description of a relatively uncomplicated but effective method for handling large runaway emissions of TDI and solvent vapors.

    NKI (B. V. Nederlandse Kleurstofindustrie, a subsidiary of Morton-Thiokol, Inc. U.S .A.), and one of the major industrial firms in the Netherlands, had a problem with extremely toxic TDI (toluene di-isocyanate) emissions from one of their processes . On a batch basis in different reactors, the largest being 6.5 m cubed(1717 U.S . gallons), a solution polymerization of TDI with polyols in a ...


    By CR Clean Air Group, LLC

  • Waterjet Solutions Set NLB Apart

    It's a classic American success story: a young man thinks he can build a better mousetrap, works very hard, and becomes a leader in his field. Forty years ago Forrest Shook had that dream, and today his NLB Corp. is known around the world for innovative high pressure waterjetting equipment that makes contractors more productive. NLB manufactures the waterjet industry's most comprehensive line of ...


    By NLB Corp.

  • Japanese metal powder manufacturer relies on U.S. Rotary Batch Mixer

    Nippon Atomized Metal Powders Corporation uses a patented water-jet atomization process to make high-quality super-fine metal powders from copper, bronze, brass, silver, gold, and stainless steel that are of consistent composition and particle size. Nippon Atomized Metal Powders refined the process of water-jet atomization to produce metal powders with well-shaped, uniform particles in the range ...

  • Automotive: At Sandvik Coromant, Clean Air Group Scrubber Handle Emissions Emergencies case study

    Mr. Tahvanainen heads up a staff of eight maintenance personnel and a supervisor. He is a mechanical engineer with a background in power production and thermodynamics. Editorial Background: Sandvik Coromant of Fair Lawn, NJ is part of Sandvik’s tooling division. The overall Sandvik Corporation employs 35,000 in one hundred and thirty (130) countries. ...


    By CR Clean Air Group, LLC

  • Pulp & Paper: Great Northern Uses Venturi Scrubbers Case Study

    The Great Northern Paper Co.’s mill in Millinocket, Maine, produces about 500,000 tpy of paper for telephone directories, magazines, almanacs, business forms, catalogs, and school workbooks. Pulp is produced in the form of chips, using the sulfite chemical process. The chips are cooked in a magnesium bisulfite solution in batch digesters at specific temperatures and pressure. When the ...


    By CR Clean Air Group, LLC

  • An inflatable tunnel seal stops flooding of world`s largest undeveloped uranium mine

    The Cigar Lake Mine, located in the Athabasca Basin of Northern Saskatchewan, Canada, is sitting on the world's largest undeveloped high-grade uranium deposit in the world. Operated and majority-owned by Cameco Corporation, Cigar Lake is expected to eventually provide more than 10% of the world's mined uranium. But to extract the uranium ore, Cameco has to overcome significant technical ...


    By Petersen Products Company

  • Contact-free indirect measurement

    The non-contact mode of measurement is very interesting for hygienic applications in the food-, pharmaceutical- and cosmetics industry, as well as for industrial applications with thick, adhesive and solid containing liquids. Experience has shown that conventional volumetric flow meters quickly come to their limit, while other measuring procedures are often very complex and/or are not suitable ...


    By Lutz Pumpen GmbH

  • Rotary batch blenders help DIP get pre-mixes to market fast

    Mixers are more efficient than double-cone units Ductil Iron Powder (DIP), Buzau, Romania, was established in 2000 as a spin-off of Ductil Steel. Its products are iron and alloyed powders for use in powder metallurgy and welding applications. The plant for making the iron powders began operation in 1995, and by 2000 it reached its current capacity ...

  • KLa Slot injector™ Aeration system assists cheese & Whey production plant solve its Nitrogen discharge challenge - Case Study

    The Challenge A gourmet cheese, whey protein, and lactose production facility located in the Midwest had been utilizing a land application system for effluent discharge for over 40 years. Using a combination of ridge and furrow and spray irrigation, the plant had many years of success applying their wastewater to the land. However, as the gourmet cheese products gained in popularity along ...


    By KLa Systems, Inc.

  • Stormwater Solids Reduction for NPDES Permits

    Finally obtaining a National Pollution Discharge Elimination System (NPDES) Permit is often a relief but is by far not the end of the story. Meeting the requirements of that permit often proves to be quite difficult and stiff fines are freely doled out to those who fail to meet regulatory limits. For one Midwest jet propulsion manufacturing facility, the issue of total daily solids discharge ...

  • Multilevel Systems

    Untitled Document Introduction A multilevel system is a groundwater monitoring device which allows ...


    By Solinst Canada Ltd.

  • Food Processing: Odor Control in Edible Oil Processing

    Abstract: The problems with odor around a typical edible oil deodorizer are discussed in detail, and a three-step solution to eliminate these problems is presented. The three steps are a distillate recovery system which recovers most of the fatty acid in the deodorizer vapor discharge as a valuable byproduct, a closed loop barometric cooling water system which keeps the fatladen ...


    By CR Clean Air Group, LLC

  • Economy in car-making - powder metallurgy

    Powder metallurgy (PM) has made a major contribution to the technology of automotive manufacture over the past 70 years. It has been and is still the fastest-growing metalworking technology. Today, on average, it provides about 10kg of the total components of a car — more in the US, where cars are larger and use automatic transmissions in nearly all units sold and less in Europe and Japan, ...

  • Oil refinery vapour gas case study

    1.0 Evaluation of Refinery Gases Various refinery gases are generated in the process of oil refining. These vary, depending upon the type of crude oil being distilled, such as Reduced Crude distillation, or Naphtha cracker. For the purposes of this case study the description and range of refinery gases are those gases produced from refining Crude Oil and Reduced Crude only. Crude ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you