high purity water industry Articles

  • Add polish to high purity water

    Electrodeionization (EDI) has recently gained widespread acceptance by water treatment companies and end users alike for almost all applications requiring high-purity water. EDI has proven to be a reliable, cost-effective solution for both end users and water treatment companies. End users purchasing capital equipment can eliminate on-site chemical regeneration. Water treatment companies selling ...


    By Agape Water Solutions, Inc.

  • High-Purity Water from Wastewater…A “Rare” Opportunity

    A cooperative water recycling effort between a major U.S. water/wastewater utility and a large oil refinery will provide significant benefits for both parties and will serve as a blueprint for future cooperative efforts between public agencies and industries.The East Bay Municipal Utility District (EBMUD), located in the eastern portion of the San Francisco Bay Area, is implementing the Richmond ...

  • Crossflow Membrane Filtration High-Purity Water Systems

    INTRODUCTION As the electronics industry continues to provide us with such products as high resolution television, notebook size portable computers and cars with automatic navigation systems, it becomes necessary to produce semiconductors with finer device geometries to allow for efficient placement of more circuits per a given area. This requires increased control of a semiconductor's material ...

  • How Do You Choose the Best Reverse Osmosis and Nanofiltration Membrane System for an Industrial Facility?

    As global demands for clean water increase, more and more industrial facilities are looking toward membrane filtration solutions, such as reverse osmosis (RO) and nanofiltration (NF), to help manage intake, process, and waste water treatment. Using membrane filtration can help your facility reuse wastewater and virtually eliminate discharge fees, and depending on the industry or required use, it ...


    By SAMCO Technologies, Inc.

  • Membrane and System Design Considerations in Producing High Purity Water

    The use of membrane technology to produce water of greater and greater purity is rapidly evolving under the pressure of new product quality specifications, including those of the pharmaceutical and beverage industries. Membrane technology is well suited to achieving multi-component water specifications, given the fundamental nature of the separation process. Meeting a resistivity or conductivity ...

  • Producing High-Purity Recycled Water for Industrial Applications with Microfiltration and Reverse Osmosis: Lessons Learned

    ABSTRACTThe East Bay Municipal Utility District (District), with the assistance of Black & Veatch, studied the feasibility of treating secondary and tertiary effluents using microfiltration (MF) followed by reverse osmosis (RO) to produce high-purity, recycled water for use as boiler make-up water at a local refinery. A pilot-scale test program was developed to demonstrate the ability of the ...

  • Oil Recycling - Case Study

    The problem: Waste oil recycling contributes very much to climate protection through (CO2) energy saving. Compared to the production of base oil the re-refining of waste oil uses 34 % less resources. In the sixties the German government was subsidising the re-refining of waste oil. Because of that the use of waste oil as a fuel was neglected. The used oil re-refining is the ...


    By Dirk European Holdings LTD

  • Lessons Learned: The Installation of a 300 to 600 gpm Semiconductor High-Purity Water System

    The life of a high-purity water treatment project may be compared to roli¡ng a boulder down a dome-shaped hill (1). The project gets rolling with a fairly small nudge. Once ¡t ¡s rolling, however, ¡t takes a great deal of effort (time and money) to change the direction or go back up the hill. The projectto design, build, instali, and commission the “E” high-purity ...

  • High Purity Boiler Water Production Using Municipal Wastewater at a Combined Cycle Gas-Fired Generating Station

    The recovery of wastewater for industrial uses presents many challenges for the design and operation of water treatment equipment. Since the term wastewater can be applied to a wide range of water sources from municipal sewage to storm runoff to industrial discharge water, the water characteristics may have great variability. As such, the equipment to treat wastewater must be robust and ...


    By Eco-Tec Inc.

  • High Purity Boiler Water Production Using Municipal Wastewater at a Combined Cycle Gas-Fired Generating Station

    Abstract The recovery of wastewater for industrial uses presents many challenges for the design and operation of water treatment equipment. Since the term wastewater can be applied to a wide range of water sources from municipal sewage to storm runoff to industrial discharge water, the water characteristics may have great variability. As such, the equipment to treat wastewater must be robust ...


    By Eco-Tec Inc.

  • Microelectronics - Lessons learned: the installation of a 300 to 600 GPM Semiconductor High Purity Water System

    The life of a high-purity water treatment project may be compared to roll-ing a boulder down a dome-shaped hill (1). The project gets rolling with a fairly small nudge. Once it is rolling, however, it takes a great deal of effort (time and money) to change the direction or go back up the hill. The project to design, build, install, and commission the "E" high-purity water system at VLSI ...

  • Membrane processing for water treatment in the semiconductor industry

    It is the aim of high-purity water production to either fully eliminate organic and ¡florganic compounds, particles, and microorganisms from the water or to reduce their concentrations to values below the detection limits of the most advanced analysis methods. Currently, this problem is solved by means of a multi-stage process chain, in which membrane technology ...


  • A high-performance electropositive filter

    Reverse osmosis (RO) membranes have become the industry standard for purification of any feed water source. They are used extensively for producing high-purity, low-conductivity process water. They are also used for producing ultrapure water from fresh water because RO is presumed to be the ultimate purifier. Because RO filters are readily fouled by colloidal particles and biofilms, some method ...


    By Argonide Corporation

  • Challenge #2 - Manufacturing, General Industry

    A small industrial entrepreneurial company on the East Coast was considering using high purity water in the production of their high quality product. They were concerned the ‘larger’ water companies would not give the project the attention it deserved, and that the system may cost too much. They came to Applied Water Solutions, Inc. for the solution. Solution AWS met with the client and ...

  • Water Sustainability

    I7.1  | Water Optimization – 30% Groundwater Use Reduction Tabatha Pellerin, Senior Program Manager, AECOM AECOM assisted the Entergy Lewis Creek gas/coal fired electric power plant with water conservation efforts prompted by a goal of 30% ...

  • VSEP improves industrial boiler performance and reduces blowdown frequency by a factor of ten

    In the steam boiler industry, high purity feed water is required to ensure proper operation of steam generation systems. High purity feed water reduces the use of boiler chemicals due to less frequent blowdown requirements (reducing blowdown frequency by as much as a factor of 10). Lower blowdown frequency also results in lower fuel costs. Scale buildup is reduced due to a smaller concentration ...


    By New Logic Research, Inc.

  • Power Industry using Micro-Media Filtration and short-bed ion exchange

    With the demand or higher efficiencies, lower maintenance and operating costs for boilwers and turbines, high-purity water treatment systems are becoming more crucial to the operation of power plants. Modern power plants, operating at supercritical and ultra upercritical boiler pressures and temperatures, require high-purity water that approaches quality levels at the theoretical levels. ...


    By Eco-Tec Inc.

  • Industrial Skid Mounted Filtration System, USA

    INTRODUCTION In April 2013, Pure Aqua successfully manufactured and supplied to a major wastewater treatment site in the USA with a skid mounted twin alternating multi-media water filtration system to remove suspended solids from well water. The multi-media filtration system comes complete ...


    By Pure Aqua, Inc.

  • UltraPure water: systems for microelectronics

    The burgeoning electronics industry Electronics are the heartbeat of the products and services of many industries – including aerospace, communications, entertainment, defence, and health – and, as a consequence, the global electronics market is valued at US$1 trillion worldwide. ...

  • FTIR resolution requirements for industrial gas analyzers

    FTIR Spectroscopy is a widely used technique for gas analyses in industrial applications. It is a technique used in the semiconductor industry for measuring the purity of cleaning, etching, and epi-treatment gases used with various process tools, reactors, and abatement devices. Among chemical companies and R&D facilities, FTIR is applied to combustion thermodynamics and stack gas emissions; ...


    By CIC Photonics, Inc.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you