high solids decanter Articles

  • Separation principle of decanting centrifuge

    KOSUN DC series decanting centrifuge is used in separating suspension of solids phase with particle diameter(d≥2μm) for drilling mud and fluids handling. Ruggedly built for oilfield and industrial services, it is especially effective in environmentally sensitive areas. It delivers high fluid-recovery rates and ...


  • Drilling decanter centrifuge business in America

    KOSUN, as a professional oilfield solid control equipment manufacturer, has a pleasure of offering you drilling mud cleaners at reasonable prices. It also gives waste management equipment, such as vertical centrifuge, high G dryer and screw pump. A decanter centrifuge can make drilling cuttings or ...


  • KOSUN decanter centrifuge overseas business in America

    KOSUN has expanded its overseas market. It has founded a branch in America. So, for the America market, the clients can access to choose KOSUN solids control equipment. As the hottest product, decanter centrifuge must be welcomed. KOSUN has high efficient decanter centrifuge, which operated by spinning closed containers of the mixture around a central point. The force of decanter ...


  • maintenance of the vibrator motor for KOSUN decanter centrifuge

    Solids control system is the indispensable sector in oil & gas drilling oeration, consists of drilling fluids circulating tank, drilling fluids purification equipment where shale shaker,vacuum degasser,desander, desilter,decanter centrifuge,centrifugal&nbs ...


  • Maintenance of Oilfield Drilling Mud Decanter Centrifuge

    Decanter centrifuge is widely used in drilling mud separation to separate smaller solid particles after the equipment processing such as drilling mud shale shaker and drilling fluids mud cleaner or desander and desilter. Usually, decanter centrifuge is equipped with screw pumps or slurry pumps to feed drilling mud to ...


  • A smarter approach to solids control

    When looking at technical brochures and marketing materials in regards to solids-control equipment, one question that should always come to mind should be: Is this really necessary? Other great questions to ask are: What are my day-to-day needs; and what are my severe, high-duty needs? Finding the right solidscontrol equipment is much like buying a personal automobile. Most vehicles’ ...


    By Elgin Separation Solutions

  • Equipment List for full solids manage & drilling waste

    Solids Handle & drilling waste management are pretty important for drilling contractor. If they manage this division well, they can save lots of money on drilling mud / drilling chemicals, also they can be environmental friendly. There is much equipment needed for solids control & drilling waste ...


  • Mud desanders and desilters used in solids control system

    Mud desander is the second stage in the operation of drilling solid control equipment, commonly used is 10"and 12" cyclones. Oilfield mud desander is mainly used for the separation of solid particles in drilling fluid to particle size 45-74 microns in diameter. According to the processing capability, the ...


  • The Application of Waste Solids Management Vertical Cuttings Dryers as an integral element of a successful Solids Control System

    In Elgin’s last White Paper, “Common Challenges Relative to the Use of Decanter Centrifuges for Barite Recovery in the Oil & Gas Industry,” a detailed discussion was offered about the complexities involved in achieving effective solids control when deploying a dual-centrifuge “barite ...


    By Elgin Separation Solutions

  • Environmentally friendly sequencing batch reactor design keeps noise, energy & capital costs low

    Perry Township in Fayette County, Pennsylvania is one of the first SBR plants to utilize a surface mounted process aerator/mixer, which is a significant improvement over the traditional diffused air network designs. The new layout offers substantial capital investment savings as well as significant reductions in noise, operations/ maintenance, and energy consumption. KLH Engineers, Inc., ...

  • The use of oilfield shale shaker

    Shale shaker for solids control are devices that remove drill cuttings from the drilling fluid while circulating and drilling. There are many different designs and research into the best design is constantly ongoing since drilling fluids solids control is vital in keeping down costs associated with the drilling ...


  • Case study – Nalco - GEM technology successfully implemented at food processor

    Situation A Midwest food processor used multiple and parallel batch sedimentation reactors with a decanting treatment system to handle waste flows of 100,000 gallons per week. Significant manual attention and operation was required because the flows varied widely based on production schedules. Once sedimentation/decant was accomplished, the supernatant was discharged to city POTW and the ...


    By Clean Water Technology, Inc.

  • Drilling Mud Circulation System

    As more utility contractors are moving up to larger rigs, they are also moving toward the use of solids removal ( solids control ) systems. These solids control systems are not stand-alone units. They are part of the drilling mud system along with the ...


  • Pulp & Paper Sludge Dewatering - Stora Enso, Niagara Mill, Wisconsin - Case Study

    The Stora Enso, Niagara Mill, was established in 1889. Niagara Mill uses 7,500,000 gallons per day of water from the river to make pulp & paper. The removal of the solids is accomplished by treating it with alum, then a flocculent, allowing the solids to settle out in a 2,000,000 gallon setting tank system. This tank requires yearly cleaning to ensure quality water for the paper making ...

  • For Pulp and Paper Industry, Geotube Dewatering Technology Solves Many Problems - Case Study

    Geotube dewatering technology aids in lagoon cleanout, expands capacity, and helps address environmental concerns—often at a reduced cost compared to other methods. Pulp and paper mills have to manage water to be successful. That includes planning and executing efficient dewatering operations. And a technology from TenCate has proven itself highly successful in pulp and paper ...

  • Case study – GEM vs DAF, efficiencies of GEM system over dissolved air floatation (DAF)

    Introduction Clean Water Technology, Inc., the creator of the Gas Energy System (GEM), provides the most advanced primary treatment system on the market. The GEM System provides superior reduction of total suspended solids (TSS), biological and chemical oxygen demand (BOD/COD), fats, oils and grease (FOG) and turbidity. Challenge A Frozen Food Manufacturer ...


    By Clean Water Technology, Inc.

  • Drilling Mud in Horizontal Directional Crossing Project

    Horizontal Directional Crossing Project has a not long development in the country and even the world. But in recent years, pipeline horizontal directional crossing has been great development, large-scale construction of oil and gas pipelines across the length and across the diameter of the continuous creation of new records. In horizontal directional crossing project, the drilling mud play a very ...


  • Centrifuge Technology in Drilling Fluid Recycling

    Drilling fluid additives and the water that contains them are an essential part and expense of successfully completing a horizontal directional drilling (HDD) installation, and the longer the bore and larger the product being installed, the more drilling fluids cost. Therefore, it makes economic sense to recycle drilling fluids by removing cuttings and recirculating the cleaned ...


    By Elgin Separation Solutions

  • Dog Food Processor Wastewater Case Study

    Pet Food Industry Wastewater Treatment Dog Food Processor A dog food processing facility was using ferric chloride and an anionic polymer to treat their wastewater using an Air Sparged Hydrocyclone ...


    By Integrated Engineers Inc.

  • De Pere & Manitowic, WI - Dewatering / Filtering Drilling Sediments - Case Study

    TenCate develops and produces materials that function to increase performance, reduce costs and deliver measurable results by working with our customers to provide advanced solutions. THE CHALLENGE Lunda Construction was subcontracted by Michels Corporation to provide 35' diameter down-shafts to facilitate the installation of a pipeline between the Manitowoc River and the Fox ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you