high temperature corrosion monitoring Articles

  • Two Detector Solution to Analyzing Sulfur

    Sulfur compounds are reactive, corrosive to pipes, and destructive to catalysts in petroleum refineries. Sulfur emission are strictly regulated globally. When released into the atmosphere sulfur dioxide converts to sulfuric acid resulting in adverse effects on human health and the environment. Sulfur detection is found useful in many other industries; therefore, detection of sulfur compounds in ...


    By Restek Corporation

  • Combating Corrosion - Committee G01 Standards Fight Nature’s Destructive Tendencies

    The evening news may leave many of us feeling war-weary, but one ASTM International technical committee has been successful in conflict of a different sort. It’s a commonplace but epic struggle between the natural and civilized worlds — the fight against metal corrosion. For the past half-century, the weapon of choice of ASTM Committee ...


    By ASTM International

  • Flying High

    Operating a biogas plant without gas quality and flow instrumentation is like trying to fly a ...


    By Gas Data Ltd

  • Effective Temperature Control for Cement Kiln Off-Gases

    INTRODUCTIONEffective off-gas temperature control without unwanted side effects can be achieved in many cement plants with state-of-the-art evaporative spray technology. Gas temperatures have elevated in recent years from as low as 180°C to over 370°C. This is coincident with a higher proportion of 'dry' operation kilns. Evaporative cooling water sprays in conditioning towers, ducts or at the ...


  • High pressure pumping systems - it`s all in the design

    High pressure pumping systems are used in a wide range of industrial processes. Careful selection of the components of the pumping system is essential for optimum safety and reliability. Failure to install a quality pump designed for the task could present a potential risk to human health or life or result in significant down-time and loss of production capacity with the associated costs to the ...


    By Cat Pumps

  • Compliance to standards in continuous emissions monitoring case study

    Customer: Glass Manufacturer Application: Continuous Emissions Monitoring Service (CEMS) for Glass Manufacturing Background: A glass factory is required to ...


    By Ecotech Pty Ltd

  • New monitoring technology helps reveal Arctic secrets

    A group of Arctic researchers has employed the latest monitoring technology to investigate the effects of climate change, by measuring temperature and salinity in the water column beneath surface ice. The results of the investigation, which utilised YSI’s new 'Castaway-CTD', could cast new light on our understanding of the ways in which shifting ocean currents impact upon the climate in ...

  • Wastewater Treatment Plant Monitors Greenhouse Gas Emissions

    Globally, little attention is paid to gaseous emissions from wastewater treatment processes. This contrasts greatly with the regulatory monitoring that is applied to the quality of water emissions from such facilities. However, in Helsinki, Finland, a large municipal wastewater treatment facility continuously monitors its emissions of greenhouse gases (GHGs) to help in the city’s efforts to ...


    By Gasmet Technologies Oy

  • Treatment plant protected by effluent monitor at major drinks factory

    The installation of a BioTector continuous TOC (Total Organic Carbon) monitor to police the front end of Cobevco’s wastewater treatment plant has enabled tight control of the treatment process. Delivering results 20 times faster than laboratory techniques, the monitor at the Elton facility in Cheshire provides advance notice of organic overload so that the plant is able to instantly divert ...


  • Quadrasperse Quadpolymer solves major fouling problem at large Gulf Coast Petrochemical Plant

    Background As a result of poor results with a previous water treatment supplier, ChemTreat was given the opportunity to turn things around in a large, open recirculating cooling system for a Gulf Coast chemical plant. The cooling system serviced a light olefins unit with multiplestage, cracked-gas compressor after-coolers operating at a high skin temperature. At a maximum skin temperature of ...


    By ChemTreat, Inc.

  • Measurement of moisture in HBr

    Introduction Moisture in corrosive gases will accelerate the rate of metal corrosion in gas supply systems which, in turn, can lead to their premature failure. For this reason, it is important to monitor moisture levels in these gases. FTIR is an effective way to monitor for moisture in these corrosive gases. In order to determine low levels of moisture in corrosive gases, it is ...


    By CIC Photonics, Inc.

  • Boiler Dissolved Oxygen Control

    DISSOLVED OXYGEN CHEMISTRY Dissolved Oxygen (DO) is a measure of the amount of oxygen, usually thought of as a gas, that is dissolved in a liquid such as water. Oxygen is essential to life and is also the most common element found taking part in corrosion reactions. DO can be thought of as the fuel needed for the corrosion process to proceed. It is the corrosion reactions that necessitate ...


    By IC Controls Ltd.

  • Gill Instruments case study featured in AWE International

    AWE International magazine, which is focused on the environmental analysis industry, recently featured Gill Instruments in a case study about environmental monitoring with solid-state meteorological instruments. The case study includes information about all of the products within the Gill Instruments range, with information about their advantages within the environmental analysis field. We have ...


    By Gill Instruments Limited

  • Case study - Pharmacuetical Company chooses the QUADRANT NRV Thermal Oxidizer

    Faced with meeting the needs of their Pharma Industry MACT Standards, one Fortune 100 Pharmaceutical Manufacturer called on Catalytic Products International, Inc. The challenge for Catalytic Products International was to design a system that was able to process the ultra-high LEL (high concentration of VOC’s) and deal with corrosive acids produced in the process off gas and the ...

  • Treated vs. Untreated Cooling Tower Water: Risks for Your Plant

    When an industrial plant or building decides whether or not to invest in a cooling tower water treatment system, it is a decision that shouldn’t be taken lightly. Petrochemical plants, chemical manufacturers, refineries, and all kinds of large buildings and facilities using cooling towers, whether they’re used as part of the industrial process or for cooling/removing heat from the ...


    By SAMCO Technologies, Inc.

  • How can I test the accuracy of my volumetric glassware?

    A huge range of tests in the laboratory require the use of volumetric glassware such as bulb or volumetric pipettes, volumetric flasks, ...


    By Camlab Limited

  • What are the root causes of wear in industrial machinery?

    Over the years we’ve published a wide range of material designed to help you protect your assets and prevent machine failure, through implementing the right maintenance programme and taking appropriate action to fix issues before they manifest into larger and often more complex problems. However, ...


    By Hansford Sensors

  • Determining levels of moisture permeation through Kalrez and Chemraz o-ring material

    Problem Statement As the manufacturers of corrosive resistant gas cells we are often called upon to design a system for the detection of moisture in various gases. Most of our requests are to detect moisture in the low ppb levels. This can be a rather difficult task to accomplish when the surrounding environment has high levels of moisture (humidity). There are several steps that we ...


    By CIC Photonics, Inc.

  • CO2 adsorption over ion-exchanged zeolite beta with alkali and alkaline earth metal ions

    The need to reduce anthropogenic CO2 emissions has been the driving force to consider new approaches and novel ideas for CO2 management, and carbon capture and storage (CCS) are considered to potentially be the most effective means to alleviate the problem. The most common method for CO2 capture is via gas absorption, with monoethanol amine (MEA) being the most widely used solvent. The current ...


    By Hiden Analytical

  • Case study - Destruction of inert process emissions

    Many chemical companies use batch reactors to make their products.  These reactors typically have vents which are opened and closed during emptying, filling, mixing, heating or cooling and other steps of the production process.  The gases coming from these vents must be controlled under most government regulations.  Generally speaking, the emissions produced are inert (little or no ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you