high waste production Articles

  • High-strength wastes boost biogas production

    Water and wastewater treatment plants (WWTP) are significant consumers of energy. The U.S. Environmental Protection Agency estimates the industry uses the equivalent of 56 billion kilowatt hours (kWh) of electricity, representing three percent of the nation’s energy consumption, and is responsible for creating 45 million tons of greenhouse gas emissions each year. Energy intensive processes, such ...


    By BioCycle Magazine

  • Wood waste product

    A landfill needed a way to reduce their waste stream volume, increase the life of their landfill, and recover a recyclable, marketable product. Wood and yard waste material comprise up to 20% of their entire waste stream volume. Processing and recycling this material will extend the life of the landfill by 20 years. They chose WSM's Model 4864BH Horizontal Hogging System with a customized feed ...

  • High quality sand from a 50 year old waste product

    A new CDE sand washing plant in Estonia is producing high quality building materials from what had previously been a waste product. The plant was purchased to process material that was simply being stockpiled as waste as a result of the high clay content. This same material is now being sold on the Estonian building materials market as high quality, fully certified sand and aggregates. The plant ...


    By CDEnviro

  • High Performance Biogas Plants for Organic Waste Diversion

    Rising energy prices and low cost feedstock offer the right mix for a profitable biogas plant. The additional income from energy production and the reduction of odorous emissions are just some of the ...


    By Eisenmann

  • High-quality plastics from waste electrical equipment

    All over Europe, electrical and electronic scrap is the waste stream showing the highest growth rates. Since electronic equipment contains the most varied kinds of materials, the recycling of such waste involves high demands with respect to separation and sorting processes. The German plant manufacturer MeWa builds state-of-the-art recycling plants for large international waste management ...


    By Sesotec GmbH

  • Waste to energy – processing waste with a high thermal value to substitute combustibles

    With the taking effect of the TASi (Technical Regulations on Estate Waste) in 2005, non-treated waste must no longer be disposed of and deposited. Commercial and industrial residues with a high thermal value such as rejects from paper industry, punchings from rubber and plastics, and other mono-fractions which are characterized by homogeneity and constant combustible properties through mechanical ...


  • High performance biogas plants for organics waste diversion

    Wild fluctuations in prices for agricultural products and mushrooming prices for energy can greatly influence the economics of biogas plants. Long term reliable profitability calculations are becoming increasingly difficult. Generally speaking, however, rising energy prices have a positive effect on the economics of well designed biogas projects. By selecting low cost feedstock, the profitability ...


    By Eisenmann

  • Waste plastic recycling plant with high technology

    Company Profile: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Waste plastic pyrolysis plant with high profits

    Pyrolysis Plant: Waste plastic pyrolysis plant, with the superiority of low capital investment and high fuel financial price, it has become the first preferred waste disposal method in many countries.This profitable project was established every week with low labor costs and high profits. Huayin renewable energy equipment company, established in 1993,have been a leader of oil pyrolysis ...


  • Turn Waste Materials Into Useful Products With Briquetting Machines

    In today’s world, any approach that aims towards reducing pollution through renewable energy must be appreciated. The use of Briquetting machines is such an approach. The fate of fossil fuel is well known, and their resources are fast getting depleted from all corners of the world. Thus, ways to exploit alternative energy resources that are renewable and lessen our dependence on fossil ...


    By Jay Khodiyar Machine Tools

  • Flying High

    Operating a biogas plant without gas quality and flow instrumentation is like trying to fly a ...


    By Gas Data Ltd

  • Florida recycling operation grinds out profits with high-production machine

    A green waste recycling business started in South Florida in 2001 is already showing signs of success in its founding year. At a site located near growing population centers and equipped with productive and reliable equipment, Nu-Way Recycling Corp. is perfectly positioned to capitalize on its production capacity while at the same time diverting a sizeable stream of organic waste from landfills ...


  • Two-Stage Combustion of High-PVC Solid Waste With HCL Recovery

    Untitled Document Abstract A waste-to-energy process based on high-PVC solid wastes is discussed. The basis is that at 200-400°C the PVC fraction decomposes ...

  • High technology comes to Hazardous waste disposal – Case Study

    Skyrocketing hazardous waste disposal costs for the USC/ Division, of C.R. Bard, Inc., Billerica, Massachusetts led them to a high technology solution. USC/, a medical products manufacturer that develops and produces angioplasty catheters, had seen its solid hazardous waste disposal costs rise to almost $500 per 55- ga/lon drum, excluding costs associated with inplant storage, handling, and ...


    By Waste Control Systems Inc

  • High efficiency waste tyre to oil pyrolysis plant, xinxiang huayin

    Company Profile: Waste tyre to oil  pyrolysis plant use the pyrolysis technology which is a recycling technique converting rubber or tyre waste into fuels, monomers, or other valuable materials by thermal and catalytic cracking processes. Huayin renewable energy equipment company has been leading China oil pyrolysis plant field since 1993. Huayin company offers a wide range of ...


  • Potential of hydrogen production from organic Urban Solid Waste fermentation in Mexico

    Mexico generated 35.4 million tons of urban solid wastes in 2005 of which 51% were organic ones. This biomass can be fermented into H2 when H2-based technologies increase their market penetration for the year 2020. The purpose of this work was to review studies that have utilised organic solid wastes for fermentative H2 production and to evaluate the potential for Mexico. The experimental H2 ...


    By Inderscience Publishers

  • Quality means money in shredding C&D and Industrial waste for RDF production

    A typical challenge in turning Construction and Demolition waste (C&D) and Industrial waste into high grade Refuse-Derived Fuel (RDF) is that elastic and stringy materials wrap around the rotor of the shredder. This causes hours of maintenance downtime weekly and has immediate effect on productivity. When using TANA Shark this has not been an issue for our customer Ekokem-TSJ Yrityspalvelut ...


    By Tana Oy

  • High Quality Moisture Analysis for High Value Resins

    Whether you’re making syringes or turkey basters, pacemakers or milk jugs, maintaining the correct moisture content in your resins is essential to your production process. Join us February 9-11 in Anaheim, CA at Plastec West / MD&M West, booth 3920, and see why our instruments are considered the leaders in moisture analysis for the medical device ...


    By Arizona Instrument LLC

  • Waste not, want not

    New CDE sand washing plant produces high-quality building materials from 50-year-old waste in Estonia’s capital,Talinn Estonian company Paekivitoodete Tehase (Limestone Products) have recently purchased a CDE sand washing plant to process a material that had previously been stockpiled as waste because of its high clay content. As a result, this same material is now being sold to the ...


    By CDEnviro

  • When productivity is reduced by the waste extraction system, its time to take action.

    Woodford litho called upon Impact Air Systems to review their existing waste extraction system in preparation for the installation of an additional new binding line.  The existing waste system, supplied by a competitor, delivered the waste to a single compactor and was not capable of removing the additional waste from the new binder but also blocked frequently, reducing productivity of the ...


    By Impact Air Systems

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you