hot gas filtration system Articles

  • Case study - Organic particulate filtration

    Overview A food products company that mixes various types of waxes and other components to make the base for chewing gums was faced with the issue of cleaning up a slightly odorous, visible emission being exhausted from two of their process lines. The components of the emission were hot particles of chewing gum and some volatile organic compounds (VOC's). The particles would quickly clog ...

  • Replacement of Hot Caustic Paint Stripping Process with High Pressure Water Jet System: Ford Australia

    Ford Australia Ltd replaced an existing hot caustic paint stripping process, used for cleaning car skids, with a high pressure water jet system. This project has resulted in annual savings in the order of $300,000 from reduced chemical, energy and waste disposal costs. Significant improvements in paint quality were also achieved through the ability to clean the skids on a more regular basis than ...


  • BHP Billiton - cooling water treatment & solids filtration

    Client: BHP Billiton Douglas CETCO Oilfield Services was requested to supply a water treatment package to treat heavily contaminated water in-line. Consequently CETCO’s equipment had to operate at pressures of up to 15.5 bar and temperatures of 120°C. Following lab bench studies and a technical onsite evaluation, CETCO modified an existing RFV 3000 adsorption skid to carry out this unique closed ...


    By CETCO Energy Services

  • The Dangers of Hydrogen Sulfide and Filtration with Activated Carbon

    Hydrogen sulfide (H2S) is a poisonous, highly flammable, colorless gas that is associated with a ‘rotten egg’ odor. As stated by cchealth.org, “hydrogen sulfide is created naturally by decaying organic matter and is released from sewage sludge, liquid manure, and sulfur hot springs.” It also is a by-product from industrial processes such as natural gas processing, ...


    By General Carbon Corp.

  • Solid / gas separation with fabric filters

    A myriad of filter media are utilized today for separation of particulate matter in industrial gas filtration applications. These media range from single use (deposable) to semi-permanent media and include fiber, fabric, ceramic, membrane, metal mesh, and sintered metal media. Semi-permanent media are usually cleanable, either on or off-line, and are primarily intended for long-term (up to ...

  • Generation using gas-fuelled engines in South Africa – an overview

    Most gas engines are Otto cycle spark ignition internal combustion reciprocating engines using natural gas as the primary fuel. Smaller models utilise stochiometric combustion while the larger engines are lean burn engines with pre-chamber ignition systems. The engines are coupled with packaged generator sets, ...


    By Clarke Energy

  • Case study: Ahlstrom’s gas turbine air intake filter media helps to save energy, CO₂ and cost

    Finding new methods for saving energy is a global megatrend. Implementing technology that saves energy will have a positive impact on sustainability. Gas turbines are widely used for energy production as natural gas is one of the cleanest burning fuels and nowadays even more interesting source of energy. One of the most important parts in a gas turbine is the blade section, which converts the ...


    By Ahlstrom Corporation

  • Odor Control System Addresses Community’s Complaints

    The Customer: The Water Pollution Control Authority (WPCA) of the City of Bridgeport, Connecticut, operates two wastewater treatment facilities and maintains the city’s sewer system. The Customer’s Needs: After years of operating successfully in the community, the City of Bridgeport’s WPCA developed an odor problem at its East Side ...

  • Odor control system addresses community’s complaints - case study

    The Customer: The Water Pollution Control Authority (WPCA) of the City of Bridgeport, Connecticut, operates two wastewater treatment facilities and maintains the city’s sewer system. The Customer’s Needs: After years of operating successfully in the community, the City of Bridgeport’s WPCA developed an odor problem at its East ...

  • 1st Tech applications range case study

    Paper industry: roller, air compressor, after cooler, calender bowl, chemical scrubber, closed cooling system, condenser, cooling tower, gas cooler, heat exchanger, intercooler, filtrate tank, filtrate pipe, vacuum filter, vacuum pump, slush pump, lime pump, evaporimeter, digester, scrubber, flow box, squeezer, indirect cooler, absorption plant, gas steam room, steam ...


    By Mibo International Corp.

  • What`s New? Biogas Power

    Technologies that connect the biogas line to the power line include cooling and clean up components, microturbines and reciprocating gas engines and control systems. TOP BILLING on the biogas to electricity stage typically goes to the microturbines and reciprocating gas engines. But in the theater of renewable energy from organics recycling, the show can’t go on without the supporting cast of gas ...


    By BioCycle Magazine

  • Unmixing Water From Waste: The imporance of filters, cartridges and housings as a function of manufacturing

    In manufacturing, water and water-based solutions are regularly filtered for various purposes and outcomes – including for cleaning, cooling, and movement. The filtering process is crucial to quality, performance, and cost savings. With the wrong filter in place, pumps can be destroyed, liquid being filtered can become “unusable” for the intended purpose, cleaning solvents can ...


    By Shelco Filters

  • Difficult Complex Decisions For Coal-fired Power Plant Operators

    Changing fuel prices, government regulations and technology all combine to make decision making difficult for operators and developers of coal-fired power generation facilities around the world. Power plant designers in developing countries face new local environmental regulations plus additional requirements stipulated by lenders such as the World Bank. In the developed world, the regulations ...


    By The McIlvaine Company

  • High-strength wastes boost biogas production

    Water and wastewater treatment plants (WWTP) are significant consumers of energy. The U.S. Environmental Protection Agency estimates the industry uses the equivalent of 56 billion kilowatt hours (kWh) of electricity, representing three percent of the nation’s energy consumption, and is responsible for creating 45 million tons of greenhouse gas emissions each year. Energy intensive processes, such ...


    By BioCycle Magazine

  • Case study - Meat processing odor control

    Overview For its first two years of production, a food manufacturer based in South Wales, England, focused its production on potatoes. Neighborhood residents voiced no complaints about odors during this time period. However, as new production lines (including barbequed meats and curried chicken) were added, the complaints began, and it became clear that odor abatement equipment was needed ...

  • Pump Contract for MARS Tanker. Logistic Support Ship - Case Study

    In 2010 following many months of dialogue with BMT Naval Architects the initial purchase enquiry for the supply of pumps and systems for the 4 new logistic support ships for the U.K RFA (Royal Fleet Auxiliary) was received from the Korean Shipyard DSME. DESMI participated in the tender process from the very beginning and had an open and honest dialogue with both the ...


    By DESMI A/S

  • Effective Temperature Control for Cement Kiln Off-Gases

    INTRODUCTIONEffective off-gas temperature control without unwanted side effects can be achieved in many cement plants with state-of-the-art evaporative spray technology. Gas temperatures have elevated in recent years from as low as 180°C to over 370°C. This is coincident with a higher proportion of 'dry' operation kilns. Evaporative cooling water sprays in conditioning towers, ducts or at the ...


  • Air Pollution Control: Ready for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


  • Textile Industry: Air Pollution Control Through Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers and Other Technologies

    Wet Scrubbers, High Energy Venturi Scrubbers, Packed Bed Scrubbers are an excellent solution for air pollution in the textile industry. The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well ...


    By CR Clean Air Group, LLC

  • Case History - Air Pollution Control in the Textile Industry: a Technology for the 21st Century

    The textile industry is plagued by air pollution problems which must be resolved. In particular, smoke and odor arising in the process require abatement. Air pollution control technology is available today which will serve the textile industry well into the 21st century. The nature of the problem The major air pollution problem in the textile industry occurs during the finishing stages, ...


Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you