humidity control Articles

  • Introduction of Wine Cellar Temperature and Humidity Control Units

    Wine cellar temperature and humidity control unit or wine cellar constant temperature and humidity machine, is namely called low temperature precision constant temperature and humidity air conditioner, commonly known as wine cellar machine. The unit principle is the same as that of ordinary air conditioners, but it has its own characteristics. It uses a low temperature compressor because the ...

  • Vehicle Manufacturing

    DEHUMIDIFICATION AND HUMIDIFICATION FOR VEHICLE MANUFACTURINGVehicle / Automotive manufacturing have different process part. Proper humidity level will improve the productivity. Painting, as a key part of the process, requires a strict control of humidity. According to the practice, under 24℃, relative humidity more than 60%, the membrane of the automotive body turns to sag. When the RH reaches ...

  • Medical Device Manufaturing & Clean Room

    Medical device manufacturing takes place in clean room environments with strict requirements for atmospheric control, which always has standard heating, ventilating and air conditioning equipment. The higher class of the clean room, the stricter requirement of temperature and humidity control. So it is concerned to equip the suitable clean room dehumidifier when in clean room design stage. ...

  • IML labels raw material

    Normally, IML labels raw material is PP,PE or PP and PE mixed co-polymer. Labels have three layers.The first layer is optimum seal layer, second is main layer,the third is hot melt glue layer. IML labels must have good venting function, When it fusing with plastic part,venting will impact production surface.In addition, it should be for electrostatic treating after printing, otherwise it ...


    By Focare Mould Co.,Ltd.

  • Hotels

    HOTEL DEHUMIDIFIERS A successful hotel will definitely want to give the guests and customers a lasting impression. As a guest, we always wish that the stayed hotel is favorable, friendly, healthy and comfortable. Rise of humidity will lead to high condensation in the hotel room. The moisture will be formed on the surface of walls and ceilings, which is very harmful to the hotel guest rooms. As ...

  • Hotels

    Hotels HOTEL curling rink dehumidifier A successful hotel will definitely want to give the guests and customers a lasting impression. As a guest, we always wish that the stayed hotel is favorable, friendly, healthy and comfortable. Rise of humidity will lead to high condensation in the hotel room. The moisture will be formed on the surface of walls and ceilings, which is very harmful to the ...

  • Sharp Laboratories of Europe Low Dewpoint Dry room for Battery Research - Case Study

    Low dewpoint dry room enables increased battery research capability Sharp Laboratories of Europe carries out research into new ideas for Sharp’s innovative technologies including mobile phones, laptops, televisions and battery solutions. Part of this research includes developing next generation battery technologies using new materials. In the past, Sharp Laboratories of Europe used gloves ...


    By Munters

  • Hotels

    A successful hotel will definitely want to give the guests and customers a lasting impression. As a guest, we always wish that the stayed hotel is favorable, friendly, healthy and comfortable. Rise of humidity will lead to high condensation in the hotel room. The moisture will be formed on the surface of walls and ceilings, which is very harmful to the hotel guest rooms. As the hotel rooms are ...

  • Indoor Ice Rink

    ICE RINKS DEHUMIDIFIERS WHY ICE RINKS NEED DEHUMIDIFIERS Ice rinks and curling make the indoor room in a relative low temperature. Humidity enters with the frequent opening and closing doors, the incoming warm air. If not control the humidity in the indoor ice rinks and curling, condensation forms, usually in the ceiling. With excessive moisture, many problems will occur: drops of condensation ...

  • Indoor Ice Rink

    ICE RINKS DEHUMIDIFIERS WHY ICE RINKS NEED DEHUMIDIFIERS Ice rink dehumidifier make the indoor room in a relative low temperature. Humidity enters with the frequent opening and closing doors, the incoming warm air. If not control the humidity in the indoor ice rinks and curling, condensation forms, usually in the ceiling. With excessive moisture, many problems will occur: drops of condensation ...

  • Coveris use the Systech 8001 Oxygen Permeability Analyser to validate the barrier performance of their packaging films

    Coveris manufacture flexible and rigid packaging that adds real value to products such as fresh and frozen food products by optimising its protection, freshness and shelf appeal. With more than 8,500 global employees and 60 strategically located facilities, Coveris is dedicated to providing solutions that enhance the safety, quality and convenience of products we use every day. They use the ...

  • Permeation analysis of polymer nanomaterial composites - Case Study

    The Centre for Research on Adaptive Nanostructures and Nanodevices (CRANN) is Trinity College Dublin's largest research institute and a Science Foundation Ireland funded Centre for Science, Engineering and Technology, which partners with University College Cork. At CRANN, there are over 300 researchers, led by 18 Principal Investigators each of whom is an internationally recognised expert in ...

  • Indoor Ice Rink

    Indoor Ice Rink ICE RINKS DEHUMIDIFIERS WHY ICE RINKS NEED DEHUMIDIFIERS Ice rinks and curling make the indoor room in a relative low temperature. Humidity enters with the frequent opening and closing doors, the incoming warm air. If not control the humidity in the indoor ice rinks and curling, condensation forms, usually in the ceiling. With excessive moisture, many problems will occur: ...

  • Permeation analyser provides validation to packaging film barrier performance

    Established in 2013 by bringing together the 5 smaller groups of Exopack US, Britton Group, Paccor, Paragon Flexibles and Kobusch, Coveris is now one of the world’s leading suppliers of high performance flexible and rigid packaging for the consumer goods and food service sector. With more than 8,500 global employees and 60 strategically located facilities, Coveris is dedicated to providing ...

  • Permeation analyser provides validation to packaging film barrier performance - Case Study

    Established in 2013 by bringing together the 5 smaller groups of Exopack US, Britton Group, Paccor, Paragon Flexibles and Kobusch, Coveris is now one of the world’s leading suppliers of high performance flexible and rigid packaging for the consumer goods and food service sector. With more than 8,500 global employees and 60 strategically located facilities, Coveris is dedicated to providing ...

  • Medical: Desiccant humidity control and temperature regulation for biotherapy effectiveness testing - Case Study

    The Challenge: A design engineering firm came to us to design a medical environmental control system (ECS) that could maintain less than 3% relative humidity (RH) and 75°F temperature ±2° for automated packaging of biotherapy reagents, some of which were highly sensitive to moisture and sensitive to heat. The desiccant humidity control and temperature regulation system would be ...


    By Air Innovations

  • North American R&D facility builds prototypes

    Situation: North American R&D facility of U.S.-based leading global security company builds prototypes of unmanned airborne systems for the purpose of testing and validation. Parts are produced in limited numbers throughout the fabricating shop. Component building process involves the use of adhesives that will only successfully bond within very specific temperature and humidity ranges that ...


    By Duroair Technologies Inc.

  • Climate-controlled clean room enables maneuverable aerospace prototyping – Case Study

    North American Aerospace Prototype Testing and Validation Situation The North American R&D facility of a U.S.-based leading global security company builds prototypes of unmanned airborne systems for the purpose of testing and validation. Parts are produced in limited numbers throughout the fabricating shop. Component building process involves the use of adhesives that will only successfully ...


    By Duroair Technologies Inc.

  • Dust Stop Undergoes Testing in Korea

    Daejin University in Korea conducted a test to verify the efficiency of Dust Stop as an airborne dust suppressant in 2008. Dust Stop was tested under 3 conditions (calm, mild or strong winds). Tests were held within a stainless steel chamber to allow control over humidity and temperature. Dust Stop was found to have favourable efficacy to suppressing airborne dust at a rate of 90.7%. Our ...


    By Cypher Environmental Ltd.

  • Do you need to monitor temperature and humidity in controlled environments?

    Look no further. This compact and easy-to-use instrument is ideal for constant monitoring of temperature and humidity measurements in environments where a record of data for traceability is required. It is ideal for use in medical product storage facilities, warehousing and distribution, containers, industrial processes, laboratory environments, museums, and classrooms. With a capacity of over ...


    By ATP Instrumentation Ltd

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you