hydraulic power Articles

  • Designing With Geosynthetic Clay Liners

    In construction, preventing the penetration of liquids and gases is essential to maintaining the integrity of a structure. Often, containment is just as important, especially when dealing with chemical contaminants or other waste. When looking to stop the spread of contaminated liquids and gases, there are few tools as effective as geosynthetic clay liners (GCL). Read on to learn how to design ...


    By Agru America, Inc.

  • Low energy mixing to optimize anaerobic digestion at the Kitchener WWTP

    The existing Kitchener Wastewater Treatment Plant (WWTP) is a conventional secondary treatment facility, with a rated capacity of 122,745 mVd. The plant is comprised of two separate secondary treatment plants (Plant 1 and Plant 2) served by a common headworks facilities and primary clarifier facilities. Plant 1 was constructed in the early 1960s and Plant 2 was constructed in the mid-1970s. Both ...

  • The Next Generation of Level Control

    Water is an essential resource for everyday life, and thus having a way to store and distribute water is of critical importance. Water storage tanks have been designed to compensate for varying water demands during high and low ...


    By Singer Valve Inc.

  • How a Specialized Automatic Control Valve Solved Flooding

    The Colombian area of Antioquia creates much of its clean power from hydropower plants along the Guadalupe River. The Guadalupe IV hydroelectric plant generates power with three vertical axis turbines that discharge water below the river level. To prevent flooding, however, the plant needed a solution that ensured the ejector ...


    By Singer Valve Inc.

  • Design of thermal-hydraulic cooling in nanoscale environment of lunar nuclear power plant

    The thermal-hydraulic design in the Moon is constructed for heat exchange by radiation heat transfer. The optimised length for the cooling loop is obtained for the safety aspect, which can show the reliability of the performance. The nanoscale content of the lunar environment gives a different kind of cooling substance from the Earth. Coolant of reactor core is made by potassium and that of the ...


    By Inderscience Publishers

  • Canada pump and power utilizes hydraulic submersible pumps in unique applications

    Abrasive slurry, temperature swings of more than 100 degrees Fahrenheit, remote locations…any of these things would test a pump system. Canada Pump and Power’s hydraulic pump platforms face all three obstacles to transfer solids out of waste ponds. In service for more than two years, CPP’s Hydraulic Tiller Dredge utilizes a Cornell hydraulic submersible 6NNT pump married with a ...


    By Cornell Pump Company

  • The Versatility of Hydraulic Submersible Pumps

    Hydraulic submersible pumps offer flexibility and performance When determining a pump for an application, there are a number of factors to consider. Hydraulic submersible pumps are an option and give the added benefit of run dry capability, especially when electric powered pumps are of concern due to potential electrical hazards or other reasons, or diesel driven centrifugal pumps ...


    By Griffin Dewatering

  • Hydraulic modeling trends in 2003

    It is traditional as a New Year dawns to review the old year and draw some conclusions. Not to be left out, we asked a number of our industry experts to reflect on key developments in their area of specialism based on their observation of the activities and issues facing users around the world during 2003. We cover in turn each of our key areas – Collection Systems, Water Supply, River Systems, ...


    By Innovyze

  • New hydraulic pipe spreader bars

    Dave McGuinness, International Business & Product Manager, Schoenbeck GmbH & Co. KG, Germany, presents a new hydraulic spreader bar that is specially designed for deploying concrete coated pipes. Due to customer demand, Schoenbeck GmbH & Co. KG has developed a further unique piece of pipe handling equipment specially designed for deploying ...


    By Schoenbeck GmbH & Co. KG

  • Harrison Ford’s Millennium Falcon Accident – Too much Force was awoken in a hydraulically powered door

    In June 2014 the actor was crushed underneath a hydraulically powered door with “the power…. comparable to the weight of a small car” according to a spokesman from the Health & Safety Executive (HSE). The company held responsible for the accident have now pleaded guilty to two health and safety breaches under the Health & Safety at Work Act 1974. The first breach is ...


    By SHEilds Ltd

  • Hydraulic Fracturing and the Environment Whitepaper - Analytical and Measuring Instruments

    The recovery of natural gas and oil from untraditional wells is necessary for the economic stability of the United States. Shale gas deposits are deep below the earth’s surface and recovery of gas is expensive and requires millions of gallons of water mixed with chemicals, known as "fracking solution". Most fracking solution stays underground or returns to the surface mixed with formation ...

  • Flourishing Period of Fote Hydraulic Cone Crusher

    Hydraulic cone crushers from Fote Machinery are widely utilized in industries of coal mining, power, metallurgy, chemical engineering, transportation, construction and so on because of advantages such as the reasonable structure, advanced technology, reliable operation cost, environmental friendliness and safety, long service life, high crushing ratio ...


    By Fote Machinery

  • Hydraulic Modelling in the Middle East and North Africa

    Water is under pressure in the Middle East and North Africa, a region which houses 4% of the world’s population but possesses only 1.4% of global water resources. A naturally scarce resource at the best of times faces increasing demand from a growing population with high expectations of water quality, supply and treatment. At the same time, the price of water fails to reflect the true cost of ...


    By Innovyze

  • Crisafulli trailer, vertical, and hydraulic submersible pumps.

    The Town uses the following Crisafulli equipment to solve its problem:  One (1) Crisafulli 12' Humpback Trailer Pump,  One (1) Crisafulli 16' Vertical PTO Pump, One (1) Crisafulli 16' Vertical Electric PTO Pump, Three (3) Crisafulli 16' Vertical Electric Pumps, One (1) Crisafulli 2-1/2' Hydraulic Submersible Pump, One (1) Crisafulli 16' Vertical Electric, 2001. PROJECT ...


    By SRS Crisafulli, Inc.

  • Hydraulic “Fracking”: Are surface water impacts an ecological concern?

    Use of high‐volume hydraulic fracturing (HVHF) in unconventional reservoirs to recover previously inaccessible oil and natural gas is rapidly expanding in North America and elsewhere. Although hydraulic fracturing has been practiced for decades, the advent of more technologically advanced horizontal drilling coupled with improved slickwater chemical formulations has allowed extensive natural ...


    By John Wiley & Sons, Ltd.

  • 5 hydraulic equipment mistakes you might be making

    When dealing with hydraulic equipment, there are many intricate pieces that impact the effectiveness of these machines. There are many components of hydraulic equipment, and it is important that they all run smoothly. Here are five mistakes you may be making and how to correct them. 1. Changing the Oil If the base oil is degrading ...


    By A&S Hydraulic

  • Using GIS to Build Hydraulic Models Faster

    The use of hydraulic models, already widespread, continues to grow rapidly.  Modeling is used increasingly all around the world to address planning and operational issues in water supply networks, collection systems, and river management. Much of this growth results from the rapid advances in the capabilities of the best of the hydraulic modeling software solutions, which constantly improve ...


    By Innovyze

  • Power Positive Resource Recovery

    Using laws of thermodynamic analysis to evaluate the energy and power characteristics of wastewater and beneficial uses of biogas offers greater insight into best business practices and what is achievable. Growing numbers of waste-water treatment plants (WWTP) are striving to produce more power onsite. In recent years, there’s even been a race among WWTP operators to see who can ...


    By BioCycle Magazine

  • Comprehensive scale model for LMFBR reactor assembly thermal hydraulics

    The construction of the 500 MWe Prototype Fast Breeder Reactor (PFBR) is underway at Kalpakkam, India. This liquid sodium-cooled reactor is a pool-type reactor with two secondary loops. Experimental investigations have been carried out to understand the complex flow, temperature patterns and flow-induced vibration characteristics. To enhance the confidence in the design of the components immersed ...


    By Inderscience Publishers

  • Experimental facilities for VVER thermal hydraulic research and code validation (COVERS)

    The main objectives of the COVERS Task Group WP3B 'Experimental facilities and code validation' are as follows: description of all major experimental facilities modelling the Thermal Hydraulics (TH) of VVERs; identification of missing test data or experimental capabilities; discussion of shared use of the facilities; discussion of needs for further computer code validation; comparing analysis ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you