hydraulic power plant Articles

  • Design of thermal-hydraulic cooling in nanoscale environment of lunar nuclear power plant

    The thermal-hydraulic design in the Moon is constructed for heat exchange by radiation heat transfer. The optimised length for the cooling loop is obtained for the safety aspect, which can show the reliability of the performance. The nanoscale content of the lunar environment gives a different kind of cooling substance from the Earth. Coolant of reactor core is made by potassium and that of the ...


    By Inderscience Publishers

  • Economics of tiny thermal power plants

    Thermal power plants is the main source of energy and electricity in India and almost all countries of the world. Most of the giant thermal power plants have capacity of 500MW to 1000 MW. Investment in such giant thermal power plants is Rs 100 million per MW including transmission lines and distribution lines. ( 60 rupees = 1 US$, MW=1000KW). So 1000MW thermal power plant costs Rs 100 million/MW ...


    By AADHUNIK GLOBAL ENERGY

  • Case Study - 6MW Non-Condensing Power Plant

    Lihir Island, Papua New Guinea – 2003 First Geothermal Power Station in PNG: Press Release, April 16, 2003 Lihir Gold Limited “Gold company Lihir Gold Limited is turning its vast geothermal resource into an opportunity. In April, the company started commissioning a 6MW geothermal power station, the first in Papua New Guinea to use natural geothermal ...

  • A novel technique proposed for automatic control of small hydro power plants

    A new scheme is proposed for the speed control of hydro turbines. Power can be controlled by controlling the rotary motion of the spear valve or linear motion of the sluice gate. In this paper, necessity for speed control, various function of governors, types, speed regulation of micro-hydroelectric power plants, functional block diagram of power generation and control system general models for ...


    By Inderscience Publishers

  • GE Leakwise Application Notes: Oil Detection in Hydro-Electric Power Plants

    Leakwise* Oil Detection in Water Collection Sump Under Turbines Water carries oil leakage from turbine bearings and other leaking sources into a large sump, which is built under the turbines. In most plants, pumps installed at the bottom of the sump discharge the water directly to the river.  A Leakwise lD-221 Floating Oil Detector is installed in a perforated 6” stilling well. The ...


    By GE Analytical Instruments

  • Largest power plant in philippines uses membrane desalination for purified WA

    The Facility Ilijan Plant, developed by KEILCO-KEPCO Ilijan Corporation, is located in the Island of Luzon, about 100 miles south of Manila, Philippines. It is a combined cycle power plant and at 1,200 MW generating capacity, is the largest power plant in the Philippines. The plant consists of two power blocks, which share a common membrane based Seawater Desalination system for ...

  • Solving waste oil management and removal problems in power generating plants

    If your plant is like most, it is doing a good job of preventing oily water waste and waste oils from escaping into the environment. But at what cost? As labor resources dwindle, operating and maintaining drainage systems, oil separators, and sometimes inadequate oil removal equipment is expensive. Paying higher than needed costs for waste oil disposal, filtration and water treatment due to these ...


    By Oil Skimmers, Inc.

  • Power Positive Resource Recovery

    Using laws of thermodynamic analysis to evaluate the energy and power characteristics of wastewater and beneficial uses of biogas offers greater insight into best business practices and what is achievable. Growing numbers of waste-water treatment plants (WWTP) are striving to produce more power onsite. In recent years, there’s even been a race among WWTP operators to see who can ...


    By BioCycle Magazine

  • Combined cycle power plant in southern india uses membrane desalination for boiler feed

    The Facility PPN, a 330 MW combined cycle power plant developed by PPN Power Generating Company, is located in Pillaiperumalnallur about 320 kilometers south of Chennai, India. It is one of the largest IPP power plants developed by an international consortium in India under a 30 year PPA with the state electricity board. The plant consists of a single dual fuel power block and ...

  • Cost effective boiler makeup system using membrane desalination for power plant in dominican republic

    The Facility Andres Power Plant, developed by Caribbean Thermal Electric LLC, is located in Boca Chica, near Santo Domingo, Dominican Republic. It is a 300 MW gas fired combined cycle power plant and is one of the largest IPP power plants in the Dominican Republic and will supply electricity to Corporacion Dominicana de Electricidad. The plant consists of two power blocks, which ...

  • Experimental facilities for VVER thermal hydraulic research and code validation (COVERS)

    The main objectives of the COVERS Task Group WP3B 'Experimental facilities and code validation' are as follows: description of all major experimental facilities modelling the Thermal Hydraulics (TH) of VVERs; identification of missing test data or experimental capabilities; discussion of shared use of the facilities; discussion of needs for further computer code validation; comparing analysis ...


    By Inderscience Publishers

  • Optimizing water management in hydraulic fracturing for shale oil and gas production

    Centralized treatment of wastewater is emerging as a viable solution for long-term efficiency in managing water sourcing and wastewater treatment in hydraulic fracturing. The number of hydraulic fracturing (fracking) shale oil and gas wells in the United States continues to increase. Within the Bakken Shale formation alone, in North Dakota and Montana, upwards of 15,000 hydraulic fracturing ...


    By WesTech Engineering, Inc.

  • Optimizing Water Management in Hydraulic Fracturing for Shale Oil and Gas Production

    Centralized treatment of wastewater is emerging as a viable solution for long-term efficiency in managing water sourcing and wastewater treatment in hydraulic fracturing. The number of hydraulic fracturing (fracking) shale oil and gas wells in the United States continues to increase. Within the Bakken Shale formation alone, in North Dakota and Montana, upwards of 15,000 hydraulic fracturing ...


    By WesTech Engineering, Inc.

  • Mine Restores Basin Capacity with Hydraulic Dredge Case Study

    SRS Crisafulli introduces the Rotomite model 6000-CD Dredge SRS Crisafulli designed and built the self-propelled, steerable, diesel powered all-purpose dredge for both abrasive and soft slurries with a cast alloy pump, and 8” discharge, in the fall of 2013. The dredge was tested at Fisher Sand and Gravel’s pond on Circle Highway northwest of the Company’s Glendive, ...


    By SRS Crisafulli, Inc.

  • Mercury and other trace elements in Ohio River fish collected near coal‐fired power plants: Interspecific patterns and consideration of consumption risks

    Many coal‐fired electric generating facilities in the US are discharging higher loads of Hg, Se, and other chemicals to receiving streams due to the installation of flue gas desulfurization (FGD) air pollution control units. There are regulatory concerns about the potential increased uptake of these bioaccumulative trace elements into food webs. We evaluated the concentrations of As, THg, ...


    By John Wiley & Sons, Ltd.

  • Changing the energy game with the ‘power of one’

    Who among us has not eagerly described the smart meter to a non-energy person only to be greeted by a blank stare, or worse the retort: “Why would I want to track my electricity costs all day?” You try to explain the profound applications: smart appliances that talk to the power grid, consumer clubs that sell energy savings, your car serving as a power plant. But the conversation then ...

  • Crisafulli submersible pumps and power units-case study

    In June, 1997, Mr. Quinn of EPCO, the customer's designated agent, inspected the systems at Crisafulli's manufacturing plant, and these made in Montana pumping systems were tested and shipped to Siberia. SRS Crisafulli, Inc., founded in 1966, is one of a few select manufacturers of specialized, engineered pumping and dredging systems in the United States. From its beginning, SRS Crisafulli has ...


    By SRS Crisafulli, Inc.

  • Development of one-dimensional computer code DESOPT for thermal hydraulic design of sodium-heated once through steam generators

    Once-through Steam Generator (SG) is a critical component of Liquid Metal Fast Breeder Reactor (LMFBR) plant. It is a counter current heat exchanger, in which heat is transferred from the hot sodium flowing on the shell side to water/steam in tube side. High pressure subcooled water enters the SG tube from bottom, gets heated up to saturation, goes through nucleate boiling, dry out and post dry ...


    By Inderscience Publishers

  • Mixers and Flowmakers: Mixers at BNR plant in Borås, Sweden

    Borås Treatment Plant, the Gässlösaverket, is situated at the river Viskan which is also the recipient. The plant is the largest single discharge to the Viskan, and since the water does not pass any lakes on its way to the sea, the reduction of nitrogen is small. Due to requirements with regard to the reduction of nitrogen discharge set out by the Swedish environmental authorities, the Borås ...


    By Landia

  • Polish CEMEX cement plant relies on WEIMA - Case Study

    In the eastern Polish town of Chelm, not far from the Ukrainian border, the waste recycling company EkoPaliwa recently successfully commissioned their new plant for the production of alternative fuels. Two WEIMA PowerLine 3000 single-shaft shredders with a powerful hydraulic drive used in secondary shredding absolutely take center stage here. The main buyer of the produced Refuse Derived Fuel ...


    By WEIMA

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you