hydrocarbon absorbent Articles

  • Waste Gas in Metal Recycling: Hydrocarbons and carbon monoxide - Case Study

    Example: Aluminium recycling Similar tasks: Recycling of copper, lead, cink The waste gas in metal recycling usually contains particles (abraded metal, mineral dust), inorganic, acid substances (HF, HCI, SOx) and dioxins (PCDD/F) as well as a whole range of organic substances (unburned hydrocarbons) and carbon monoxide. Particularly, in the group of unburned ...

  • A Simplified Procedure for the Determination of TPH’s in Waters and Soils Using the HC-404 System

    The determination of Total Petroleum Hydrocarbons (TPH), greases, and lubricant residues are important environmental and industrial tests. Fuel and lube oils can be determined in water and soils to track spills and storage tank leaks, while many military and industrial situations require certain components (gas regulators, space shuttle components, weaponry parts, etc.) to have a maximum limit of ...


    By Buck Scientific Inc

  • Elimination of oil stains in a fast food takeout lane case study

    MICROCAT-SMPL Hydrocarbon Cleaner/Degrader was added to remove oil stains from a fast food takeout car lane. Objective of Treatment Eliminate the oil stains on the pavement and treat hydrocarbons in an environmentally safe way. Site History In an area where cars stop frequently to pick up fast food, they drop small amouts of oil and other hydrocarbons on ...


    By Bioscience, Inc.

  • Produced water at UGS Dolni Dunajovice

    Water is the main contaminant of natural gas. Mostly, it is a natural element of a reservoir content. When dry gas is injected into a reservoir, it absorbs volume of water there. Together with water, it absorbs hydrocarbons, which can be natural elements of the reservoir or of artificial origin and contaminants which were injected in to the reservoir with natural gas. During a withdrawal, this ...


    By Inderscience Publishers

  • Knowing your A/A split from your elbow

    The term Total Petroleum Hydrocarbons (TPH) still remains poorly defined so that TPH data provided by laboratories is prone to disparity according to the analytical procedure undertaken, says Malcolm Avis of Chemtest. TPH data may be required for regulatory compliance, risk assessment, investigation or remediation. An appreciation of the methodology and terminology will ...


    By Newzeye Ltd

  • On-Site Bioremediation Of Oily Waters At The Maintenance Facility Of South Jersey Port Corporation, Camden, NJ

    Water from the maintenance shop in South Jersey Port Corporation in New Jersey was contaminated with free oil and grime during pressure washing of port vehicles. The shop would wash at least four vehicles in a day. Wash water was released through an oil water separator system using absorbent socks and diapers to absorb the oil before release into the waste stream as per the directive of the local ...


    By Sarva Bio Remed, LLC

  • Rapid on-site analysis of fats, oil and grease (FOG)

    It is estimated that 23-28% of Sanitary Sewer Overflows (SSOs) are due to Fats, Oils and Grease (FOG) or as much as 19 million gallons from 1998 to 2001 (State of North Carolina, 2004). Our increasingly mobile society has led to a decrease of cooking at home and a significant growth in the commercial food sector. This, on top of other industries such as metal processors, meat packers, cosmetic ...


    By Spectro Scientific

  • Solvent choices for infrared testing of oil and grease in water

    Water is a very strong absorber in the mi d infrared (I R) regio n where o il is measured. We see the effect of infrared absorbance when a cold bucket of water left in the sun is quite warm by afternoon due to the absorption of infrared energy as heat. When measuring part per million (ppm) oil levels with mid IR, the water absorbs so much of the infrared energy that the signal becomes saturated ...


    By Spectro Scientific

  • Passive sampling for target and non‐target analyses of moderately polar and nonpolar substances in water

    The applicability of silicone rubber and low density polyethylene (LDPE) as passive sampling materials for target and non‐target analyses of moderately polar and non‐polar substances was assessed through a field deployment of samplers along a small polluted stream in Oslo (Norway). Silicone and LDPE samplers of identical surface area (but different volumes) were deployed at six sites in the ...


    By John Wiley & Sons, Ltd.

  • Biofuels effluent, does it exceed regulatory limits?

    The US Environmental Protection Agency (EPA), as well as other regulatory agencies around the world, have established limitation guidelines for discharges of “oily wastes” from facilities utilizing any type of oil and grease in their manufacturing process. However, recently several biodiesel plants in the US have been fined for illegally discharging vegetable-based oil and grease and polluting ...


    By Spectro Scientific

  • The no. 1 choice for improving the performance of soil and groundwater remediation

    Adsorption of Contamination The number one challenge associated with most site remediation designs and methodologies is that 90% to 95% of all environmental contaminants; including hydrocarbons (LNAPL), chlorinates (DNAPL), and heavy metals; are present in a sorbed (i.e., absorbed or adsorbed) phase onto soil and bedrock surfaces within both saturated and unsaturated zones. As such, the absorbed ...


    By Ivey International Inc.

  • Binding interactions of 1‐naphthol with dissolved organic matter of Lake Biwa and treated sewage wastewater: The role of microbial fulvic acid

    The binding interactions of 1‐naphthol with effluent and whole natural dissolved organic matter (DOM) samples were analyzed by using a fluorescence quenching technique. Nonfractionated DOM samples from Lake Biwa (Japan), creek water, treated sewage effluents, and an extracted Lake Biwa fulvic acid (LBFA) standard were used as quenchers and compared at the same 1‐naphthol with DOM organic carbon ...


    By John Wiley & Sons, Ltd.

  • Solvent-free oil-in-water analysis

    Non-ionic surfactants can homogenize oily, produced water samples, creating optically clear microemulsions that are ideal for fluorescence measurements [1]. The use of surfactants to reduce fouling and improve the performance of on-line, fluorescence-based, oil-in-water monitors has been reported previously [2,3]. This paper describes the use of surfactants to prepare discrete water samples ...

  • Liberating contaminants for easy recovery

    The number one challenge associated with most site remediation designs and methodologies is that 90-95 per cent of all environmental contaminants are present in an adsorbed phase onto soil and bedrock surfaces within both saturated and unsaturated zones. Contaminants, including hydrocarbons (LNAPL), chlorinates (DNAPL) and heavy metals, are sorbed onto the substrates and so have reduced mobility ...


    By Ivey International Inc.

  • How molecular sieve DESICCANT is used for oxygen generation?

    Molecular sieves are basically three dimensional aluminosilicate that contains cavities inside the crystal. Through various channels these cavities are interconnected with each other. These channels are called pores. All the pores have an exact diameter which is uniform. This diameter plays a very crucial role in the application of these zeolites. This means that the molecules which have a ...


    By Sorbead India

  • Case study - Public-private partnership successfully tests leakwise early oil spill detection sensor in the tidal Delaware river

    Background In the summer of 2011, the Delaware River Basin Commission (DRBC) and the U.S. Geological Survey (USGS) collaborated with GE Analytical Instruments on a unique test deployment of an oil sheen sensor in the tidal Delaware River. The idea for the test deployment arose during meetings of the Delaware River and Bay Oil Spill Advisory Committee, which includes organizations and ...


    By GE Analytical Instruments

  • Surfactant enhanced bioremediation (SEB)

    Surfactant Enhanced Bioremediation (SEB®) using Ivey-sol® involve the use of Ivey-sol formulations which are patented non-ionic surfactant mixtures used in the in-situ and ex-situ treatment of petroleum hydrocarbons, heavy metals, and more recently radioactive type contaminated waste. These surfactant formulations have the ability to enhance soil biodegradation. During In-situ and Ex-situ ...


    By Ivey International Inc.

  • Different technology options for monitoring oil in produced water – inline continuous monitoring and IR analysis

    No offshore facility wants to be caught with a sheen around their platform as that can result in a costly fine for exceeding discharge permit limits for oil. Onboard oil in water analyzers are necessary to ensure the oil/water separation systems are functioning properly before overboard disposal of the produced water. Bench top analyzers have traditionally been used to test oil in water although ...


    By Spectro Scientific

  • Will your oil in water analysis method match the regulatory method?

    Anyone involved in field analysis of oil in water will continually get the question “Does your equipment match the regulatory method?” While the amount of oil in water is highly regulated -- it can also be a challenging measurement. It is complicated by the fact that oil comes in many forms and the measurement is defined by the particular regulatory method. When EPA 1664 is the ...


    By Spectro Scientific

  • Minimizing Operating Costs in VOC Abatement Equipment

    Untitled Document As governmental regulations of environmental emissions become more restrictive, the average concentration of Volatile Organic Compounds (VOC's) has decreased as more ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you