in-line strainer Articles

  • Don’t Let Your Control System Control You

    Regular maintenance ensures valves remain healthy. If your system is operating properly, you should physically inspect all valves at least every 12 weeks to check for tubing leaks and other abnormalities. Pressure gauges should be checked to ensure each valve is performing as designed. If you find something wrong, refer to the appropriate instruction manual, which may be available online. Because ...


    By Singer Valve Inc.

  • Keeping Your Control Valves in Good Health

    Whether that brand new control valve in your system is the first one you have ever had to look after or if you are an old hand at valve maintenance with tens of valves in your system, there are a few simple guidelines and reminders for keeping it operating at optimal performance. It’s important to physically check valves at least every 12 weeks or so, assuming everything is running fine in ...


    By Singer Valve Inc.

  • Healthy Control Valves

    A simple maintenance routine can help ensure trouble-free valve operation. Whether the control valve in your system is the first one that has required maintenance or if you are experienced with maintaining multiple valves in your system, some simple guidelines can help keep them operating at optimal performance. Physically checking all valves at least every 12 weeks is important, assuming that ...


    By Singer Valve Inc.

  • Pump Performance Checklist

    Keeping your pump in shape will help reduce costs and boost profits! Cut fuel consumption, reduce replacement parts costs and minimize pumping time on every job! A PUMP THAT LETS YOU DOWN when you need it most causes obvious losses of time and money. Not so obvious, but every bit as costly, are losses you can incur with pumps that operate at less-than-peak efficiency. A pump ...


    By Gorman-Rupp Co.

  • Top 10 Valve Considerations for Pressure Management Zones/DMA’s

    For basic pressure management or more advanced modulating pressure management, water suppliers create a network of District Metered Areas (DMA’s) or smaller, more manageable pressure management zones. The DMA or pressure zone gives the ability to measure flow and control pressure, when a Pressure Reducing Valve (PRV) ...


    By Singer Valve Inc.

  • Pump Maintenance Know-How

    It’s no secret that a pump that runs at peak efficiency uses less fuel, experiences less downtime and costs less to operate. The time you spend maintaining your pump is actually an investment in its lifetime performance and value. In fact, there are many ways that a diligently maintained pump can reduce your costs, while increasing efficiency. For instance, by ensuring your pump investment ...


    By Gorman-Rupp Co.

  • Spray Painting Industry: Wynnum Car Renovators Panel Beating & Towing

     Background Wynnum Car Renovators Panel Beating & Towing (WCR) is a medium sized spray painting and panel beating workshop which employs eight staff. Over the years, Peter Watson (Manager of WCR) has been continuously thinking of ways to improve his business productivity, reduce operating costs, and help protect the environment. He has to date introduced a number of waste ...


  • Magnetic filtration used in a candy manufacturing plant

    Candy ManufacturerPt. Mayora Indah Tbk.IndonesiaPROBLEM: High levels of finished product being rejected due to ferrous contamination.SOLUTION: Beny Hermawan of PT. Sinarmentari Indoprima the Indonesia distributor for OEI installed an OEI magnetic filter rod (3RNC5812) in an existing T-Strainer on the finished product line (photo A).RESULTS: Photo B: contamination captured 44 grams ...


  • Preventing Rust Formation with Electronic Water Treatment

    The growing demand for water for industrial applications, power production and water supply has resulted in an increasing need for water treatment. The water used in industry comes from a range of sources such as rivers, lakes, wells and oceans and contains dissolved and suspended solids.  In addition the industrial world has to reuse water which in turn causes it to be highly concentrated ...

  • Wastewater engineers go with the flow

    The efficiency of maintenance work has been improved by water treatment engineers employing Intellisonde monitors in their final effluent. Designed primarily to measure water quality, the Intellisondes also measure flow, and this reading is being used to detect the accumulation of debris that necessitates a maintenance visit. Wastewater treatment efficiency is often measured by the analysis of ...


    By Intellitect Water Ltd

  • Top 8 things to check when maintaining a Pressure Reducing Valve

    Like every other piece of mechanical equipment we use, a control valve does require some maintenance. As budgets are stretched and time is tight, it can be tempting to ignore checking on valves that are often located in underground vaults and give years of operation without complaint, but eventually like everything else, they will fail. This article looks at 8 simple steps that if undertaken ...


    By Singer Valve Inc.

  • A first person account of mine longwall dewatering solutions

    When mining companies in Alabama have problems, they look to Jim House & Associates (JH&A) for solutions. Such was the case when a large mining company needed to keep water off of the longwall face underground and they looked toward Jim House & Associates to provide them with a solution. JH&A has been in business since 1957 and is a premier ...


    By Cornell Pump Company

  • Effective Removal of Zebra Mussels with Amiad Screen Technology

    Introduction The zebra mussel, native to the Black and Caspian Seas, has spread in the past few decades to waterways throughout the world mostly via ballast water. Zebra mussels, when non-indigenous to the environment, pose a serious threat to intakes of facilities that rely on fresh and brackish surface water. The mussel colonies obstruct the flow of water through the pipelines eventually ...

  • atg UV provide solution to chemical balance in swimming pool applications

    Client: Gloucester Institute of Technology   Location: Gloucester, USA Service: Swimming Pool UV Disinfection Description: atg UV provide solution to poor water quality due to high levels of chloramines. The Gloucester Institute of Technology has chosen a state-of-the-art atg UV Technology Ultraviolet water ...


    By atg UV Technology

  • Improving and maintaining the performance of your Heat Exchanger or Condenser.

    The usage of Heat Exchangers or Condensers is common in many processes across a wide range of industries. The Energy sector is no different, either in the Thermal Power Generation, Upstream and Downstream of the Oil and Gas including Petrochemical and Chemical plants; Heat Exchangers are used to cool of the steam or to pre-heat different liquid needed in the processes. The recurrent problem of ...

  • Act now to beat EU changes to wastewater treatment regulations

    Introduction Over the past few months, signals have been emanating from Brussels that hint at tighter wastewater treatment regulations. For instance, not only has Carlos Moedas, EU Commissioner for Research, Science and Innovation, recently been calling for better treatment systems for wastewater, but former Environment Minister, Janez Potočnik, has backed ...

  • American Industrial helps Knife River construction with Cornell Technology

    American Industrial of Livermore California emphasizes first-class customer service, in acquiring and retaining pump system customers.  For the last 8 years, they have brought that customer service focus to their relationship with Knife River Construction. Knife River, operating an aggregate sand/gravel plant in Marysville California, is the ninth largest aggregate producer and the sixth ...


    By Cornell Pump Company

  • Fluoridation: A Better Way? case study

    Ffficient, cost-effective addition of fluoride to drinking water is increasingly important as the U.S. EPA and Department of Health and Human Services contemplate additional nationwide standards for fluoride injection. A relatively new company, Integrity Municipal Services (IMS), has developed a new design for sodium fluoride saturator and feed systems and has successfully applied it at customer ...


    By Integrity Municipal Systems

  • Case study - UV systems for spas & hydro pools

    With the rise of health centres and leisure clubs throughout the UK, a key feature in many modern facilities is the inclusion of spas and hydro pools.  As a specialist aquatic application, spas and hydro pools feature high turnover rates, high bather loads, increased turbulence and water temperatures above 35oC.  This combination of factors provides a perfect breeding ground for harmful ...


    By atg UV Technology

  • Ultraviolet disinfection systems, the best solution to school swimming pools

    School swimming pools are a valuable asset, and are now present in the majority of high schools and higher education facilities throughout the UK.  Whilst school pools vary in size, shape and usage, many school swimming facilities are facing a common dilemma in their water disinfection strategy.  Existing treatment regimes are often badly designed, under sized or simply outdated, which ...


    By atg UV Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you