in-situ dust monitor Articles

  • Insitu analysis of ammonia slip and water vapor using a tunable diode laser for SCR/SNCR optimization and boiler tube surveillance in power plants

    ABSTRACT Environmental Regulations driven by the 1990 Clean Air Act require Power Plants to reduce NOx emissions. SCR's and SNCR's reduce NOx emission by injecting ammonia into the combustion flue gas. which ideally reacts with the NOx to form H?0 and Nj. The efficiency of the SCR SNCR is determined by monitoring the outlet for excess NH3. referred to as NH3 slip. The flue gas sample ...

  • Electrofilter protection by fast monitoring of CO in flue gas – Case Study

    Electrostatic precipitators Many industrial operations produce exhaust gases that contain dust, fly ash (unburned constituents), fumes (including fine elemental particles such as cadmium, sulfur and lead) and mist (such as coal tar), which cause an unwanted impact to human health and the environment. One widely used method of removing such contaminants from a gas stream is to use an ...

  • Minimizing ammonia consumption in DeNOx plants – Case Study

    Flue gas denitrification Combustion processes result in emissions that can be harmful to the environment, in particular carbon dioxide (CO2), sulfur dioxide (SO2), nitric oxides (NOx), and dust. Therefore, measures are implemented in power stations and other plants comprising combustion processes to reduce emissions. For flue gas denitrification, besides front-end primary ...

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Landfarming

    Introduction Landfarming is a full-scale bioremediation technology, which usually incorporates liners and other methods to control leaching of contaminants, which requires excavation and placement of contaminated soils, sediments, or sludges. Contaminated media is applied into lined beds and periodically turned over or tilled to aerate the waste. Soil conditions are often controlled to ...

  • Stormwater Management for Urban Environments

    IntroductionElmhurst College, a hundred-thirty-five year old private learning institution, is proceeding with a campus redevelopment project that will include a one hundred seventy bed residence hall. In addition, the college continues to be a role model for sustainable site design and an educational resource for both students and the community.The need for additional housing, due to ...


    By Advanced Pavement Technology

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you