in-situ gas detection Articles

  • Mississauga Case Study (In Situ Gas Thermal Remediation (GTR™))

    In Situ Thermal Desorption in conjunction with soil vapor extraction was used to remove volatile organic compounds which contaminated the groundwater and saturated soil areas of a former metal fabricating facility in Ontario, Canada. The site had VOCs detected above the Canadian water standard in various monitoring well locations.  The remediation goal was achieved in 84 days and saw a 98% ...


    By GEO Inc

  • EPA Region 9 Case Study (In Situ Gas Thermal Remediation (GTR™))

    In Situ Thermal Remediation was used to successfully treat benzene, TPH-d, TPH-mo, BaP, and Naphthalene from a former gas plant in EPA Region 9. Gas Thermal Remediation (GTRTM), using Thermal Conductive Heating (TCH), raised the temperature of the soils in the treatment zone of the former MGP site to an average temperature of approximately 325 degrees Celsius.  The COC(s) identified at the ...


    By GEO Inc

  • Real-time O2 monitoring in VCM plants using the In-situ laser gas analyzer – Case Study

    Vinyl Chloride Monomer (VCM) Vinyl Chloride Monomer is a colorless, flammable gas. It is of very great importance as feedstock in the production of polyvinyl chloride (PVC), one of the world´s most versatile thermoplastics. Originally, acetylene has been used as feedstock for VCM production but was replaced stepwise by the inexpensive ethylene. Complete changeover to almost ...

  • Total solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Global solution: Gas and particulate analysis in Cement industry

    Cement plants are increasingly required to install continuous emission monitoring systems (CEMS). While these represent a significant financial outlay, a range of other factors also need to be considered when selecting a suitable CEMS. To the inexperienced, selecting a suitable CEM can mistakenly be considered as simply ensuring that the applicable national regulations (eg MACT in the USA, ...


    By Environnement S.A

  • Improved HF monitoring in Primary Aluminium Smelters with Laser Gas Detectors

    Primary aluminium smelting generates large amounts of hydrogen fluoride gas (HF). Concerns for worker safety and ambient air quality require that HF be monitored at several locations in smelters. Historically, a variety of methods have been used for HF monitoring. Cassette samplers and wet chemistry techniques, coupled with complex and expensive ...


    By Boreal Laser Inc.

  • Selecting the Right Air Quality Monitor

    There are many types of air quality monitors available, but which one is the best choice for measuring gaseous air pollutant concentrations? There are two classes of such air quality monitors: sampling monitors and in-situ monitors (“in-situ” = “in the original position”). Sampling monitors utilises a manifold through which the air to be analysed is pumped. A small air ...


    By Opsis AB

  • Effective elimination – Case Study

    The LDS 6 laser diode spectrometer supports the effective, safe, and environmentally friendly elimination of odorous gases. Applications in the oil and gas industry are exactly the type of challenge the LDS 6 laser diode process gas analyzer was designed for: sites where high performance and ease of use rank on a par with increased productivity and safety. Those were the requirements of a ...

  • Anammox bacteria enrichment and characterization from municipal activated sludge

    A sustainable option for nitrogen removal is the anaerobic ammonium-oxidizing (anammox) process in which ammonium is oxidized to nitrogen gas with nitrite as electron acceptor. Application of this process, however, is limited by the availability of anammox biomass. In this study, two Brocadia-like anammox phylotypes were successfully enriched, detected and identified from an activated sludge ...


    By IWA Publishing

  • Case study: EPA region 9

    ISTR Overview Neighborhood: Industrial Heating Tubes: 14 Target Temp: 325 ˚C Heating Period: 130 Days Target: 0.9 mg/kg for Benzene Contaminant: TPH-d TPH-mo Benzene Naphthalene BaP Geology: ...

  • Full-scale SVE system operates in tandem with groundwater treatment

    Since 1993, SVE has been implemented using two designs at the TP Industrial, Inc. (TPI) site in Gardena, CA, to treat soil contaminated with chlorinated solvents. The SVE system was modified in 1997 to improve emissions control efficiency by using carbon adsorption units that treat effluent from an air-stripping system for treating site ground water. By the end of 2007, SVE had removed a ...

  • Case study : VOC analysis in ambient air by FID dectection - Complete system airmOzone

    Ozone concentration has been multiplied by 5 in the last century in the middle latitudes of the northern hemisphere from 10 PPB in 1874 to approximately 50 PPB today. This is an increase of 1.6% per year; the trend is probably higher (2.4% a year) over the last decades. (Chapter 1 of the International Geosphere-Biosphere Program - World Climate Research Program) In order to stop this global ...


    By Chromatotec Group

  • Triad expedites brownfields redevelopment in Fairbanks

    The Fairbanks North Star Borough (FNSB) used Triad in 2006-2007 to assess environmental conditions at a municipal property along the Chena River in Fairbanks, AK. FNSB accelerated the site investigation as part of a brownfields assessment grant received from the U.S. EPA in 2005. Low-level contamination had been identified onsite in past investigations, but its extent and impact on future ...

  • Field-Proven Removal of Dissolved Hydrocarbons from Offshore Produced Water by the Macro Porous Polymer-Extraction Technology

    At the moment there are no field proven technologies available to remove dissolved hydrocarbons (aliphatics and mainly aromatics) from produced water on offshore platforms. Following a joined study of the NOGEPA (The Netherlands Oil and Gas Exploration and Production Association) and the Dutch Government, the Macro Porous Polymer Extraction (MPPE) technology was selected from 55 technologies as ...

  • Concurrent bioremediation of perchlorate and 1,1,1-trichloroethane in an emulsified oil barrier

    Abstract A detailed field pilot test was conducted to evaluate the use of edible oil emulsions for enhanced in situ biodegradation of perchlorate and chlorinated solvents in groundwater. Edible oil substrate (EOS®) was injected into a line of ten direct push injection wells over a 2-day period to form a 15-m-long biologically active permeable reactive barrier (bio-barrier). Field ...


    By EOS Remediation, LLC

  • Contaminated land site investigation in Bristol

    Client: Property Developer Location: Bristol, UK Services: Contaminated Land Risk Assessment, Human Health Risk Assessment, Controlled Waters and Ecological Risk Assessment. Summary: ESI’s contaminated land assessment ensured that this former brickworks site was not registered as contaminated land under Part 2A of ...


    By ESI Consulting

  • Seasonal Fluctuation in Heavy Metal Pollution in Iran`s Siahroud River

    Abstract BackgroundThe management of its available water resources has become a key issue for Iran. During the last few decades, the water quality of Siahroud River in the coastal plain of the Caspian Sea in Gilan Province in Northern Iran has significantlydegraded. The scarcity of water has been compounded by rapid population growth and increasing pollution from ...

  • Data Requirements for Soil, Sediment, and Sludge

    Site soil conditions frequently limit the selection of a treatment process. Process-limiting characteristics such as pH or moisture content may sometimes be adjusted. In other cases, a treatment technology may be eliminated based upon the soil classification (e.g., particle-size distribution) or other soil characteristics. Soils are inherently variable in their physical and chemical ...

  • The Gasmet story from an academic idea to a global business

    In this article, Dr Petri Jaakkola, founder and Chairman of Gasmet Technologies Oy explains how an idea shared by a group of researchers at the University of Oulu in Finland, during the early 1970s, developed into one of the world’s leading gas monitoring instrumentation manufacturers. Early history – technology development At first, the Finnish researchers understood ...


    By Gasmet Technologies Oy

  • Professional Pest Manager Magazine

    In the last issue of Professional Pest Manager (PPM), we talked with western Sydney based pest manager, Greg Morrison, about his use of the Green Eye Termite Monitoring and Baiting Station. For this issue, we tracked down Greg, who operates Antibug Pest Control and his senior technician, Robert Guiffre, checking out a job which both men reckoned had become a major headache. The good news was that ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you