in-situ remediation Articles

  • The In Situ Bioremediation/Groundwater Remediation Process

    In-situ groundwater bioremediation is a technology that encourages growth and reproduction of indigenous microorganisms to enhance biodegradation of organic constituents in the saturated zone. In-situ groundwater bioremediation can effectively degrade organic constituents which are dissolved in groundwater and adsorbed onto the aquifer matrix. The Adventus In Situ Bioremediation/Groundwater ...


  • In situ remediation: enhancement technologies for remedial success

    Vol 24 No. 1  Winter 2012 HAZMAT MANAGEMENT Magazine  REMEDIATION: IN SITU  pp 42-44 Fracture - emplacement of 140 tons of Zero Valent Micro-iron/cellulose substrate  into TCE- impacted sandstone bedrock at a former air force missile base site near Windsor, Colorado. Three dimensional mapping of ZVI fractures using tiltmeter geophysics.  Treatment results after 21 months ...

  • In Situ Remediation Technology Status Report: Thermal Enhancements

    The purpose of this document is to describe recent field demonstrations, commercial applications, and research on thermal enhancements for either treatment of soil and ground water in situ or to increase the solubility and mobility of contaminants to imp rove their removal by pump-and-treat remediation. It is hoped that this information will allow more regular consideration of new, less costly, ...

  • In Situ Remediation Technology Status Report: Co-Solvents

    ABSTRACT The purpose of this document is to describe recent field demonstrations, commercial applications, and research on technologies that either treat soil and ground water in place or increase the solubility and mobility of contaminants to improve their removal by pump-and-treat remediation. It is hoped that this information will allow more regular consideration of new, less costly, and more ...

  • Application of In Situ Remediation Technologies by Subsurface Injection (PDF)

    There are many emerging remedial technologies which require the introduction of various materials to the saturated zone of a contaminated site in an effort to remediate groundwater in-situ. These remedial materials include both chemical compounds as well as proprietary products such as hydrogen release and oxygen release compounds.A common requirement to implement an effective application of many ...


    By REGENESIS

  • In-situ Thermal Remediation Under an Apartment Building

    This paper presents the implementation and results of ET-DSP, an in-situ electrical soil heating technology, in combination with high vacuum dual phase extraction, to achieve the removal of vapour pressure sensitive BTEX compounds from under an occupied residential apartment building. Operating within several engineering, environmental, and safety constraints, a design was developed in order to ...


    By McMillan-McGee Corp.

  • In Situ electromagnetic heating for hydrocarbon recovery and environmental remediation

    Introduction Thermal recovery methods, as applied in heavy oil and oil sand deposits, and in environmental remediation, have the common objective of accelerating the hydrocarbon recovery process. Raising the temperature of the host formation reduces the oil and bitumen viscosity, and, in environmental remediation, increases vapour pressure. These effects assist in sweeping the substances ...


    By McMillan-McGee Corp.

  • Apparatus for In-Situ Remediation Using Aclosed Delivery System

    ABSTRACT: In the ever-emerging field of in-situ remediation many strides are being taken to improve the efficacy of degradation. Countless hours and unparalleled research is constantly being performed in order to improve or replace current technologies. These technologies include in-situ chemical oxidation, anaerobic processes, bioaugmentation, zero valent iron, stimulation, etc. Due to the ...

  • In Situ Remediation Technology Status Report: Surfactants

    ABSTRACT The purpose of this document is to describe recent field demonstrations, commercial applications, and research on surfactant use for either treatment of soil and ground water in situ or to increase the solubility and mobility of contaminants to improve t heir removal by pump-and-treat remediation. It is hoped that this information will allow more regular consideration of new, less ...


  • In Situ Remediation Technology Status Report: Electrokinetics

    The purpose of this document is to describe recent field demonstrations, commercial applications, and research on electrokinetics for either treatment of soil and ground water in situ or to increase the solubility and mobility of contaminants to improve their removal by pump-and-treat remediation. It is hoped that this information will allow more regular consideration of new, less costly, and ...

  • In-Situ Anaerobic Remediation of Perchlorate-Impacted Soils

    AbstractARCADIS is currently leading the development, evaluation, and selection of a final groundwater remedy for a 94-acre manufacturing facility in the western U.S. This facility has produced small explosives and vehicular safety products since 1957. As a result of historic operations, soil and groundwater at the site have been impacted by perchlorate. To date, remediation efforts have been ...


    By Arcadis

  • In situ Chemical Oxidation: An Innovative Groundwater Remediation Technology

    A promising new technology, in situ Chemical Oxidation (ISCO), has the potential to supplant the more widely used pump-and-treat groundwater remediation technology by destroying groundwater contamination in situ (in place). ISCO is the process of oxidizing contaminants in the groundwater and soil by injecting water containing high concentrations of an oxidant to the site of the contamination. ...


    By AECOM

  • In-Situ Remediation of Heavy Metals Using Sulfur-Based Treatment Technologies

    The Metal Problem Highly toxic and highly soluble metals are contained in numerous waste streams including those from power, chemical, electronics facilities, general manufacturing plants, and mining facilities. Lead, chromium, arsenic, zinc, cadmium, copper, and mercury are the most common metal contaminants found on remediation project sites (US EPA, October, 2000). Cyanide is a common ...


    By Graus Chemicals, LLC

  • An experimental investigation of thermal methods for In-Situ remediation of MTBE-impacted groundwater

    Presentation Outline Review of MTBE Experiment Objectives Experimental Procedure Experimental Results Implementation of Soil Heating in the Field Conclusions. Properties of MTBE MTBE has a high solubility in water. It is ~ 24 times more soluble in water than Benzene (43,000 to 50,000 ...


    By McMillan-McGee Corp.

  • Case study - Successful remediation of MTBE-impacted groundwater using in situ

    Description Initially an SVE/bioventing system was operated for 16 months, removing over 20,800 pounds of gasoline, leaving groundwater concentrations of TPHg and benzene of 60 and 0.37 ppb, respectively.  The highest MTBE concentration in September 2001 was 5,400 ppb at a monitoring well just downgradient of the former USTs, with a total estimated area above 500 ppb of over 12,000 ...

  • China Case Study (In Situ Gas Thermal Remediation (GTR™))

    Gas Thermal Remediation (GTR™) was recently used to successfully remediate benzene and chlorobenzene impacts in China. This was the first time in situ thermal remediation was used in the history of Chinese remediation efforts. In partnership with JSDDBS, GEO used its Thermal Conductive Heating (TCH) to remove contaminants from soil and groundwater at 100 degrees Celsius. The final ...


    By GEO Inc

  • Multifunctional Well Implemented for In Situ Remediation of Hydrocarbon Contaminations in Soil and Groundwater

    Abstract A recently developed Multifunctional Well has been implemented for the remediation of subsurface contamination caused by hydrocarbon spills. Four different remediation processes can be operated within the same well. At optimal efficiency of each remediation process, successive treatment of the capillary fringes, the vadose zone, and the aquifer can be accomplished. Each treatment ...


  • Surfactant enhanced in-situ remediation of DNAPL impacted soil and groundwater - Montreal refinery

    Abstract A Montreal chemical refinery reduced the dichlorobenzene and other dense non-aqueous phase liquid (DNAPL) impacts on the soil and groundwater where a railway line is adjacent to an above ground storage tank farm. Ivey-sol® surfactant mixtures were injected three times during a two week pilot test, into a series of in-situ wells. The soil and groundwater matrix experienced ...


    By Ivey International Inc.

  • EPA Region 9 Case Study (In Situ Gas Thermal Remediation (GTR™))

    In Situ Thermal Remediation was used to successfully treat benzene, TPH-d, TPH-mo, BaP, and Naphthalene from a former gas plant in EPA Region 9. Gas Thermal Remediation (GTRTM), using Thermal Conductive Heating (TCH), raised the temperature of the soils in the treatment zone of the former MGP site to an average temperature of approximately 325 degrees Celsius.  The COC(s) identified at the ...


    By GEO Inc

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you