in-situ thermal soil remediation Articles

  • In-situ Thermal Remediation Under an Apartment Building

    This paper presents the implementation and results of ET-DSP, an in-situ electrical soil heating technology, in combination with high vacuum dual phase extraction, to achieve the removal of vapour pressure sensitive BTEX compounds from under an occupied residential apartment building. Operating within several engineering, environmental, and safety constraints, a design was developed in order to ...


    By McMillan-McGee Corp.

  • In Situ Remediation Technology Status Report: Thermal Enhancements

    The purpose of this document is to describe recent field demonstrations, commercial applications, and research on thermal enhancements for either treatment of soil and ground water in situ or to increase the solubility and mobility of contaminants to imp rove their removal by pump-and-treat remediation. It is hoped that this information will allow more regular consideration of new, less costly, ...

  • In Situ Thermal Treatment for Soil, Sediment, and Sludge

    The main advantage of in situ thermal treatment is that it allows soil to be treated without being excavated and transported, resulting in significant cost savings. However, in situ treatment generally requires longer time periods, and there is less certainty about the uniformity of treatment because of the variability in soil and aquifer characteristics and because the efficacy of the process is ...

  • Ex Situ Thermal Treatment for Soil, Sediment, and Sludge

    The main advantage of ex situ treatments is that they generally require shorter time periods, and there is more certainty about the uniformity of treatment because of the ability to screen, homogenize, and continuously mix the soils. Ex situ processes, however, require excavation of soils leading to increased costs and engineering for equipment, possible permitting, and materials handling worker ...

  • Mississauga Case Study (In Situ Gas Thermal Remediation (GTR™))

    In Situ Thermal Desorption in conjunction with soil vapor extraction was used to remove volatile organic compounds which contaminated the groundwater and saturated soil areas of a former metal fabricating facility in Ontario, Canada. The site had VOCs detected above the Canadian water standard in various monitoring well locations.  The remediation goal was achieved in 84 days and saw a 98% ...


    By GEO Inc

  • In Situ Thermal Remediation of DNAPL and LNAPL Using Resistance Heating

    Electrical resistance heating (ERH) is an in situ thermal treatment for soil and groundwater remediation that can reduce the time to clean up volatile organic compounds (VOCs) from years to months. The technology is now mature enough to provide site owners with both performance and financial certainty in their site-closure process. The ability of the technology to remediate soil and groundwater ...


    By TRS Group, Inc.

  • EPA Region 9 Case Study (In Situ Gas Thermal Remediation (GTR™))

    In Situ Thermal Remediation was used to successfully treat benzene, TPH-d, TPH-mo, BaP, and Naphthalene from a former gas plant in EPA Region 9. Gas Thermal Remediation (GTRTM), using Thermal Conductive Heating (TCH), raised the temperature of the soils in the treatment zone of the former MGP site to an average temperature of approximately 325 degrees Celsius.  The COC(s) identified at the ...


    By GEO Inc

  • Cuyama Case Study (Ex Situ Gas Thermal Remediation(GTR™))

    Ex Situ Thermal Desorption was used to successfully treat TPH-d and TPH-g from a former AST spill site in the agricultural zone in Central California. Affected soils were excavated and then placed “in a pile”, and Gas Thermal Remediation (GTR©) horizontal wells were placed into the pile during its three day construction. The piled soils represented mixed sands and high TOC soils, ...


    By GEO Inc

  • China Case Study (In Situ Gas Thermal Remediation (GTR™))

    Gas Thermal Remediation (GTR™) was recently used to successfully remediate benzene and chlorobenzene impacts in China. This was the first time in situ thermal remediation was used in the history of Chinese remediation efforts. In partnership with JSDDBS, GEO used its Thermal Conductive Heating (TCH) to remove contaminants from soil and groundwater at 100 degrees Celsius. The final ...


    By GEO Inc

  • An experimental investigation of thermal methods for In-Situ remediation of MTBE-impacted groundwater

    Presentation Outline Review of MTBE Experiment Objectives Experimental Procedure Experimental Results Implementation of Soil Heating in the Field Conclusions. Properties of MTBE MTBE has a high solubility in water. It is ~ 24 times more soluble in water than Benzene (43,000 to 50,000 ...


    By McMillan-McGee Corp.

  • The Thermodynamic Bubble problem and its relevance for In-Situ thermal remediation

    ABSTRACT This paper presents the thermodynamic bubble problem and its relevance for successful design of an in-situ thermal remedy of DNAPL in the water saturated zone. This investigation is relevant to the mass transfer of chemicals that have been volatilized as a result of an in-situ thermal remediation process. The volatilized chemicals exist as numerous entrained bubbles in the water ...


    By McMillan-McGee Corp.

  • In Situ Remediation Technology Status Report: Co-Solvents

    ABSTRACT The purpose of this document is to describe recent field demonstrations, commercial applications, and research on technologies that either treat soil and ground water in place or increase the solubility and mobility of contaminants to improve their removal by pump-and-treat remediation. It is hoped that this information will allow more regular consideration of new, less costly, and more ...

  • In-Situ thermal treatment of MGP waste and creosote

    Abstract: Remediation of coal tar at former Manufactured Gas Plant (MGP) sites, and creosote associated with wood preservative sites is challenging due to the viscous nature of the dense non-aqueous phase liquid (DNAPL) and the modest solubility and vapor pressure of the contaminants of concern (COCs). DNAPL seepage into surface water bodies, as well as groundwater plumes formed by the most ...


    By TerraTherm, Inc.

  • Redwood City Case (In Situ Gas Thermal Remediation + C3 Technology (GTR™+C3))

    The former Dry Cleaner site was located in Redwood City, California, contaminated by tetrachloroethylene (PCE). Affected soils also contained low levels of PCE degradation byproducts, such as trichloroethylene (TCE), and were presumed to have an approximate extent of 384 square feet (16’ x 24’ area) to a depth of 10 feet beneath the building. The remediation goal was driven by vapor ...


    By GEO Inc

  • Application of an innovative In-Situ thermal remediation process for removal of petroleum hydrocarbons at a former FDOT maintenance yard

    Subsurface Petroleum Hydrocarbons: Recovery and Removal Mechanisms Dissolved-Phase Recovery Pump and Treat Vapor-Phase Recovery Soil Vapor Extraction, Air Sparging Biological Removal Natural Attenuation, Source: Biosparging ...


    By McMillan-McGee Corp.

  • Thermally Enhanced Soil Vapor Extraction

    Introduction Thermally enhanced SVE is a full-scale technology that uses electrical resistance/electromagnetic/fiber optic/radio frequency heating or hot-air/steam injection to increase the volatilization rate of semi-volatiles and facilitate extraction. Thermally enhanced SVE is normally a short- to medium-term technology. Electrical Resistance Heating Electrical resistance heating uses ...

  • What’s the Temperature? Thermal Modeling and its Importance in Thermal Remediation

    What is a model? A beautiful person who struts down a run way, a scaled down sculpture of the Empire State Building, or a series of equations that describe some phenomenon? Did you guess all of the above? Gold star! Models come in many different shapes and sizes. In the environmental consulting and remediation industry, the word “model” often refers to a numerical model. Numerical ...


    By TerraTherm, Inc.

  • Thermal Desorption

    Untitled Document Introduction: ...

  • Heating up natural remediation

    Manjit Kahlon of Provectus Group Ltd describes how it investigated the effect of thermally enhanced soil vapour extraction (TESVE) on indigenous microbial communities and the potential for subsequent biological polishing of chlorinated solvents Field trials were done at the Western Storage Area (WSA) of Harwell in Oxfordshire, a former nuclear research site being decommissioned by Research Sites ...


    By Newzeye Ltd

  • DEC offer Advanced In-situ Immobilisation and Capping Technique for Polluted Sediments

    In the July 2002 issue dedicated to environmental dredging of World Dredging Mining & Construction, DEC present its newly developed in-situ immobilisation and capping technique for polluted sediments, the 3SI-technique. DEME Environmental Contractors N.V. (DEC), a Belgium-based company specialising in remediation and recycling or disposal of water bottom sediments, is offering a vast range ...

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you